ArbNation Join free

Required PPE by task: regulator lists for felling, climbing, chipper, stump grinder, pole saw and spraying

Four public documents name PPE for tree work: OSHA leaflet 3752, the US Forest Service climbing guide, the New Zealand approved code of practice and HSE leaflet INDG317. Felling and climbing get long lists. Chippers, pole saws and spraying get almost none.

Checked against the sources at the bottom of this page on October 15, 2026. Rules, fees and pay change: the source has the last word.

This page reports what the official source says. It is not legal advice: ask the office named here. An item appears in a row only where the named clause lists it. Where a document names no PPE for a task, the cell says so.

Task by task

TaskPPE namedClause
Felling and chain saw workHelmet, leg protection, hearing protection, eye protection, safety footwearNZ code of practice 2.2.2; HSE INDG317 PPE section
ClimbingHarness, helmet, long sleeved shirt and sturdy pants, eye protection, hearing protection for power toolsUSFS guide 2.2 and 3.7; OSHA 3752
ChipperProtective clothing, not itemisedNZ code of practice 3.5.1
Stump grinderProtective clothing, not itemisedNZ code of practice 3.5.1
Pole sawNot namedNZ code of practice 3.3.3
SprayingNot namedNZ code of practice 2.1.1

Felling and chain saw work

The New Zealand Approved Code of Practice for Safety and Health in Arboriculture (November 2012) sets the longest mandatory list. Section 2.2.2 says safety helmets must meet NZS 5806:1980 for industrial safety helmets (medium protection) or better, and must be worn at all times by everyone in or about an arboricultural operation. Machine operators fully protected by a certified canopy and seatbelt need not wear one. Helmets are to be brightly coloured or hi-vis, and chin straps are advised for work aloft.

  • Leg protection. Everyone using a chain saw wears leg protection to AS/NZS 4453.3 1997 or a standard with the same or more stringent criteria.
  • Footwear. All workers wear footwear with safety toe caps to AS/NZS 2210 Part 1 or an equal standard. It should support the ankles and be laced.
  • Hearing. Hearing protection is worn in any area with harmful noise. Chain saw operators wear at least grade 4. Table 1 in the code lists class 4 as 100 to less than 105 dB(A) LAeq,8h.
  • Eyes. Suitable visors or safety glasses are worn at all times, fitted so they do not spoil the seal of earmuffs.

HSE leaflet INDG317, Chainsaws at work, lists standards for the United Kingdom. A safety helmet is to EN 397, and HSE recommends a mountaineering style helmet for rope and harness work. Hearing protection is to EN 352-1, eye protection is a mesh visor to EN 1731 or safety glasses to EN 166, and leg protection is to EN 381-5.

HSE recommends all-round leg protection for arborists working in trees and for occasional users. Boots are to BS EN ISO 20345:2004 with a chain saw shield showing EN 381-3. Occasional users on even ground may wear gaiters to EN 381-9 with steel-toe-capped boots. Chain saw jackets to BS EN 381-11 can add protection where risk is higher, weighed against heat stress. Gloves are recommended under most circumstances, to EN 381-7 where chain saw gloves are required. The leaflet adds that no protective equipment gives 100% protection against cutting by a hand-held chain saw.

Climbing

The US Forest Service National Tree Climbing Guide (April 2015) has a section 2.2 on required PPE for all climbing assignments. It names a climbing harness, a climbing helmet, a long sleeved shirt and sturdy pants, and eye protection. Hearing protection is named for power tool use. Gloves are recommended but not required for general climbing. Sturdy gloves are a must for any rappelling. Logger-style boots with lug-type soles are called appropriate for most climbing work.

Section 3.7 requires helmets on every climbing assignment for climbers and ground persons. They are to meet UIAA requirements, or ANSI Z89.1 Type II with a 3-point harness. The three-point chinstrap is to be worn at all times when climbing, and standard hardhats are not authorized for tree climbing.

OSHA leaflet 3752, Tree Care Work (2014), says employers must provide free protective equipment, naming a hard hat, climbing spurs and a harness, and train workers to use it. Those three are the only items in its list.

Chippers, stump grinders, pole saws and spraying

Section 3.5.1 of the New Zealand code says everyone operating wood chippers or stump grinders must be provided with protective clothing and training in the use of the machines. It does not list the items. The general rules for helmets, hearing and eye protection in section 2.2.2 still apply to the whole operation.

Section 3.3.3 on pole pruners and pole saws covers poles of conductive material near power lines and names no PPE. The code's competency list in section 2.1.1 includes use and application of agrichemicals and the use, inspection, maintenance and storage of PPE, but no spraying clothing. INDG317 covers hand-held chain saws only. OSHA 3752 lists only the three items above.

Sources