Rope access versus work positioning in tree work: what HSE, WorkSafeBC and Alberta classify
HSE sorts rope-and-harness tree climbing into work positioning and rope access, and counts stationary rope technique as rope access. WorkSafeBC uses neither term in its tree-climbing rules, and Alberta's rope access Part is silent on trees.
Checked against the sources at the bottom of this page on October 15, 2026. Rules, fees and pay change: the source has the last word.
This page reports what the official source says. It is not legal advice: ask the office named here. It is not training and does not teach the work.
The classification by regulator
| Regulator | How tree climbing is classified |
|---|---|
| HSE, United Kingdom | The tree climbing page names two main techniques. Work positioning is changeover climbing with a harness, friction knot and climbing line. Rope access and positioning is, for example, footlocking or single rope technique (SRT). Work positioning should be used only with a suitable backup for preventing or arresting a fall. Rope access and positioning should be used only with at least two separately anchored lines, a working line and a safety line, with the user connected to both. A single rope can be used if a risk assessment shows a second line would carry higher risk and appropriate measures have been taken. |
| WorkSafeBC, British Columbia, Part 26 | Neither rope access nor work positioning appears in the rules on tree-climbing activities. They speak of a tree-climbing system, defined as the equipment a person relies on for support and security, including a harness, climbing lines and lanyards. Tree-climbing activities are climbing a tree to prune, repair or maintain it, take it down in pieces or take down parts of it. |
| Alberta, Occupational Health and Safety Code, Part 41 | Part 41 is titled Work Requiring Rope Access. Its text does not mention trees. Tree work has its own Part 39, Tree Care Operations, listed in the same code. Section 807 says Part 41 does not apply to workers using the fall protection systems specified in Part 9. |
HSE's position in the Association's account
The Arboricultural Association's account of the HSE decision, dated August 15, 2019, says the 2015 Industry Code of Practice described all rope-and-harness climbing as work positioning. That avoided the higher compliance level in Schedule 5, Part 3 of the Work at Height Regulations 2005 for rope access. HSE accepted that at the time but later told the Association it could not support it. In a July 2, 2019 meeting HSE confirmed it would not change its definitions. It said inspectors would expect two points of attachment for most of the time, and that SRT, used for access or for work positioning, would be defined as rope access.
The Association's account also records HSE's view that most access and movement around the crown is done on a single line, whether doubled or single, and that this does not match the spirit of Schedule 5. The Association said it would revise the Code and its first Technical Guide to follow.
WorkSafeBC's tree-climbing rules
Sections 26.12.0.1 to 26.12.0.6, in force from December 1, 2021, apply to tree-climbing outside forestry operations. Only a qualified arborist or trainee arborist engages in tree-climbing activities. A tree-climbing plan names the climbing system and the initial anchor point and sets out rescue procedures. Each climbing line uses at least one anchor point and independent anchor points if practicable. A stopper knot is tied at the end of each line. A cutting tool is operated only when tied in with a climbing line or lanyard and a second means of securement.
For forestry operations, section 26.7.1 requires a climber to use a safety belt, a climbing rope or strap and climbing spurs, unless the Board accepts other equipment. The Regulation's contents list a separate Part 34, Rope Access. WorkSafeBC's bulletin WS-2023-06, published November 2023, covers tree removal in residential and recreational settings and a tree-climbing plan.
Alberta's rope access Part
Part 41 requires an employer to develop a rope access safe work plan where a worker may fall 3 metres or more. In its industrial section, section 830 requires a safety, secondary, belay or backup line when the working line is the primary means of support, with a separate anchorage connection for each line. Section 805 lets workers in rope access training or work use equipment and practices other than those in Part 9.
Credits: HSE wording is adapted from pages licensed under the Open Government Licence v3.0.
Sources
- HSE, Tree climbing, tree work safety topics, read October 15, 2026
- Arboricultural Association, Background to the HSE decision on two rope working, August 15, 2019, read October 15, 2026
- WorkSafeBC, OHS Regulation Part 26 Forestry operations and similar activities, read October 15, 2026
- WorkSafeBC, Keeping arborists safe during tree removal in residential and recreational settings, bulletin WS-2023-06, November 2023, read October 15, 2026
- Alberta King's Printer, Occupational Health and Safety Code, Part 41 Work Requiring Rope Access, read October 15, 2026