ArbNation Join free

ROPS, FOPS and thrown-object protection on forestry machines: ISO 8082-1, ISO 3449 and ISO 11839

Three ISO standards cover operator protection on machines in the woods: ISO 8082-1 for roll-over, ISO 3449 for falling objects, and ISO 11839 for objects thrown by cutting attachments. Only two are written for forestry.

Checked against the sources at the bottom of this page on October 21, 2026. Rules, fees and pay change: the source has the last word.

This page reports what the official source says. It is not legal advice: ask the office named here. All three are ISO standards, not statutes. Standards bodies print their scope statements in their catalogues.

The three entries

Operator protection standards
StandardProtects againstMachines
ISO 8082-1:2009Roll-over (ROPS)Forestry: forwarders, skidders, feller bunchers, harvesters
ISO 3449:2005Falling objects (FOPS)Ride-on earth-moving machines
ISO 11839:2021Thrown objects (TOG)Forestry and related machinery

ISO 8082-1:2009, roll-over protective structures

AFNOR lists the standard as current. It runs 16 pages. The scope sets a repeatable way to evaluate the force and deflection of a roll-over protective structure under static loading, and performance requirements for a representative specimen.

It applies to forwarders, skidders, feller bunchers, processors, harvesters and log loaders as defined in ISO 6814. Machines with a rotating platform carrying a cab and boom are outside Part 1. ISO 8082-2 addresses them.

ISO 3449:2005, falling-object protective structures

The Montenegrin standards body ISME carries the ISO catalogue record. ISO 3449:2005 is titled Earth-moving machinery, Falling-object protective structures, Laboratory tests and performance requirements. Technical committee ISO/TC 127/SC 2 owns it. It replaced ISO 3449:1992 and has 13 pages in English.

The scope specifies laboratory tests of the structural characteristics of FOPS, with performance requirements in a representative test. The FOPS are those for ride-on earth-moving machines as defined in ISO 6165. They can be supplied as part of the machine or separately.

The scope excludes FOPS for landfill compactors, excavators, rollers, trenchers and pipelayers. It also excludes the additional seat for operating an attachment, such as an attachment backhoe, and machines with a power rating under 15 kW. The record shows the standard confirmed on September 7, 2022. The scope text prints the year as 2004, while the title and record say 2005.

The standard is written for earth-moving machinery, not for forestry.

ISO 11839:2021, thrown object guards

ISO 11839:2021 is titled Machinery for forestry, Thrown object guard, Test method and performance criteria. Technical committee ISO/TC 23/SC 15 owns it. It was published on February 19, 2021 in 10 pages and replaced ISO 11839:2010 and its 2012 corrigendum. The record shows the standard confirmed on September 14, 2026.

The scope establishes a laboratory test method and performance requirements for thrown object guards (TOG). They give the operator protection from thrown objects on mobile and self-propelled machinery used in forestry and related operations, including but not limited to those defined in ISO 6814. The guard is intended to give reasonable protection from powered rotating cutting or grinding elements and residual matter thrown by an attachment on the host machine.

The tests depend on mass, velocity and the profile of the cutting or grinding element. A guard that meets the standard is therefore specific to each cutting or grinding attachment and host machine model. Saw chain shot is outside the standard. The scope notes that ISO 21876 addresses it.

For the machine types behind these scopes, see the guide to forestry machines and the standards that cover them.

Sources