ArbNation Join free

Standards register addendum: EN and ISO machine standards for chain saws, chippers and log splitters

Six EN and ISO machine standards for saws, chippers and log splitters, with the edition, scope and status the EVS and BSI catalogues print. EN 13525:2020 covers wood chippers and EN 609-1:2017 covers wedge log splitters.

Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.

This page reports what the official source says. It is not legal advice: ask the office named here. The entries come from the Estonian Centre for Standardisation and Accreditation (EVS) catalogue and the BSI Knowledge catalogue. Both print a standard's title, scope, status and edition history. Pole pruners under EN ISO 11680 have their own entry, and other standards are in the main standards register.

The register

EN and ISO machine standards, as the catalogues print them
StandardTitle and scopeStatus and history
EN 13525:2020Forestry machinery, wood chippers, safety. Self-propelled, mounted, semi-mounted and trailed chippers used in forestry, agriculture, horticulture and landscapingValid from May 4, 2020. The 2005 edition with amendment A2 was listed January 6, 2010
EN ISO 11681-1:2011Portable chain-saw safety requirements and testing, Part 1: chain-saws for forest serviceWithdrawn from June 1, 2022. The history lists EN ISO 11681-1:2022 as the main standard of that date
EN ISO 11681-2:2022Portable chain-saw safety requirements and testing, Part 2: chain-saws for tree service. Combustion-engine saws with a maximum mass of 4.3 kg without guide bar, chain and fuelValid from June 1, 2022. History lists amendment A1:2017 (June 2, 2017) and the 2011 main standard (January 4, 2012)
EN 609-1:2017Agricultural and forestry machinery, safety of log splitters, Part 1: wedge splitters. Horizontal and vertical splitters for firewoodValid from February 3, 2017. The 1999 edition with amendment A2 was listed November 6, 2009
EN ISO 22867:2021Vibration test code for portable hand-held machines with an internal combustion engine, vibration at the handlesBSI: published January 31, 2022, replacing the 2011 edition, which BSI marks withdrawn
EN ISO 22868:2021Noise test code for portable hand-held machines with an internal combustion engine, engineering method (Grade 2 accuracy)Valid from April 15, 2021. The 2011 edition is listed April 5, 2011

Wood chippers, EN 13525:2020

The EVS catalogue ties the standard to Machinery Directive 2006/42/EC. It covers chippers used when stationary and loaded by hand through a horizontal or near horizontal infeed chute. Among the exclusions it lists vertical infeed chute chippers, machines that are only loaded mechanically, power take-off drive shafts, engine pull starting and shredders covered by EN 13683. For machines that can be loaded by hand and mechanically, only the manual loading is covered. The catalogue adds that the noise test code in the standard does not comply with outdoor noise directive 2000/14/EC, and that the standard does not apply to chippers made before its publication date.

Chain saws, EN ISO 11681

Part 2 of the 2022 edition is the tree service part. The EVS entry says it covers design, construction, transporting and commissioning of portable combustion-engine saws used by a trained operator with the right hand on the rear handle and left hand on the front handle. Dismantling and scrapping are not covered. The catalogue also notes that the standard deals with significant hazards when the saw is used as intended and under foreseeable misuse. The withdrawn Part 1 of 2011 covered saws for forest service used by one operator who has read and understood the instruction handbook. Part 2 for tree service has a guide of its own.

Log splitters, EN 609-1:2017

The EVS entry covers wedge splitters made for splitting logs for firewood, whatever the power source. They are designed so that one person starts the splitting action. The standard deals with significant hazards, hazardous situations and events under intended use and foreseeable misuse. It does not apply to machines designed for both cutting to length and splitting, or to splitters made before the standard was published.

Vibration and noise test codes

BSI describes EN ISO 22867 as the test code for the size of vibration at the handles of portable combustion-engine forest and garden machinery. The BSI entry lists chain-saws, brush-cutters, grass-trimmers, edgers, pole-mounted powered pruners, hedge-trimmers and garden-blowers. The 2021 edition widens the scope to hand-held edgers, defines a new accelerometer position for pole-mounted powered pruners and long-reach hedge trimmers, and broadens the engine speed tolerance for chain-saws at full load from 3.5 to 4.5 per second. BSI says the measured values come from an artificial operation but indicate the values in real work.

EN ISO 22868 is the matching noise test code. The EVS scope covers the A-weighted emission sound pressure level at the operator position and the A-weighted sound power level for the same family of machines, with blowers, vacuums and knapsack mist blowers added.

Sources