Storm response preparation: what OSHA and NIOSH publish on crew planning and hazards
OSHA's Hurricane eMatrix lists what crews met after Katrina, Rita and Wilma: work zone failures, missing PPE, chain saw hazards and live lines. It also lists the planning documents and gear it recommends beforehand.
Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.
The wording below is what the named codes and training bodies publish. It is not training and does not teach the work.
The Hazard Exposure and Risk Assessment Matrix for Hurricane Response and Recovery Work, called the Hurricane eMatrix, is OSHA's guide for crews entering a storm zone. It was built from Hurricanes Katrina, Rita and Wilma, and OSHA says it can also be applied after future hurricanes, floods and other natural disasters. OSHA sets no 72-hour window. The data covers the first six months of the 2005 response.
What changes after a storm
OSHA states that work conditions change drastically after a hurricane. Response workers meet downed power lines, downed trees and large volumes of construction debris while doing otherwise familiar tasks. Its monitoring summary names further causes of added risk: loss of power, roads, water, food and hotel service, debris in roads and work areas, many workers unfamiliar with the area, and many operations running close together.
OSHA expects workers to arrive already trained in job-specific safety procedures and in the tools, machinery and PPE of their trade. The Matrix says employers can use it to create or update job hazard analyses and for worker safety briefings.
Planning documents and gear OSHA lists
- A job hazard analysis for each task, naming the controls and PPE. OSHA points to its publication Job Hazard Analysis, OSHA 3071.
- Controls chosen by the hierarchy OSHA gives: eliminate or substitute, engineer, change work practices, then PPE.
- Work practices such as well-rested crews and daylight hours for higher hazard or unfamiliar tasks, and removal of people not needed for the task from the area.
- Evacuation routes with an alerting system, fire protection equipment, and first aid supplies with medical care readily available.
- Personal gear: immunization record and blood type, rain gear, flashlight with spare batteries, prescription medicine for the expected stay with a considerable safety margin, sunscreen, insect repellent and spare glasses.
The general PPE list for all recovery tasks is protective footwear, safety glasses with side shields, hard hats where overhead or electrical hazards exist, job-specific gloves and clothing against cuts and sun. Tree trimming adds chaps and hearing protection, and a fall arrest system for climbing.
What OSHA recorded on tree trimming
OSHA summarised 129 situation reports from Region 4, covering Florida, Alabama and Mississippi, from August 31, 2005 to March 10, 2006. They held about 4,000 entries. Tree trimming made up 8% of the activities noted, behind roof work and debris collection at 26% each.
| Hazard | Share of entries |
|---|---|
| PPE missing or used improperly | 55% |
| Work zone safety, mostly missing cones or signs | 45% |
| Chain saw hazards, including inadequate training and unsafe operation | 30% |
| Fall protection used improperly, about 75% of it in aerial lifts | 20% |
OSHA recorded no tree trimming fatalities in its reporting period, August 31, 2005 to March 21, 2006. It observed tree clearance crews in aerial lifts without fall protection, and says hearing protection was not used where noise exposures are common. The tree trimming sheet adds that PPE issues were found at over half the work sites OSHA observed.
Hazards on the tree trimming sheet
OSHA's tree trimming activity sheet is written for workers already experienced with chain saws. It lists these hazards and the controls it records for each:
- Falls. Controlled access zones, inspecting trees and limbs for structural weakness before climbing or cutting, and a personal fall arrest system.
- Live lines. Only qualified line-clearance tree trimmers clear electrical lines. All conductors are treated as energized, and lines can be re-energized without warning as utilities are restored. The sheet gives at least 10 feet from overhead lines unless they are deenergized and visibly grounded.
- Gas and chemicals. A gas leak means no spark-producing devices and evacuation. Hazardous chemical containers or leaking materials mean no spark-producing devices, moving to a safe distance upwind and calling hazardous material response.
- Chain saws. Planning the cut, watching for objects under tension, a clear retreat path, and no cutting directly overhead. OSHA lists saws with chain brakes and low kickback chains.
- Falling debris and trees. Workers not needed for the cutting kept at least 20 feet beyond the expected drop zone during trimming. Adjacent occupied work areas at least two tree lengths from a tree being felled, with more where it may roll or slide.
- Noise. Hearing protection above 90 dBA.
For training, the sheet uses the logging standard, 29 CFR 1910.266(i), as a reference for tree trimming. It adds electrical safety training under 29 CFR 1910.269 for anyone working near lines.
Stopping work in bad weather
The logging standard itself speaks to storms. Paragraph (d)(5) of 1910.266 says all work shall terminate, and each employee shall move to a place of safety, when conditions create a hazard. Its examples are electrical storms, strong winds that may affect the fall of a tree, heavy rain or snow, extreme cold, dense fog, fires, mudslides and darkness.
NIOSH on storm cleanup
The NIOSH Science Bulletin Staying Safe After the Storm, posted August 5, 2025, lists chainsaws and tree removal, fall prevention and motor vehicle safety among the physical hazards in its key messages for employers, workers and volunteers. It links to a separate resource on disaster cleanup and recovery and gives no tree-specific figures of its own.
OSHA's sheets carry a disclaimer: they do not increase or diminish any OSHA requirement, and employers must evaluate the hazards of the site where the work is done.
Sources
- OSHA, Hurricane eMatrix, introduction, read October 16, 2026
- OSHA, Hurricane eMatrix activity sheet: Tree Trimming, read October 16, 2026
- OSHA, Hurricane eMatrix, Summary of Response and Recovery Worker Exposure Sampling and Monitoring Information, Part I, read October 16, 2026
- OSHA, Hurricane eMatrix, General Recommendations for Working in All Impacted Areas, read October 16, 2026
- OSHA, 29 CFR 1910.266 Logging operations, paragraph (d)(5), read October 16, 2026
- NIOSH, Staying Safe After the Storm, NIOSH Science Bulletin, posted August 5, 2025, read October 16, 2026