Tier 4, Stage V and UK NRMM engine rules: labels, limits and tampering penalties
US Tier 4 nonroad diesel engines carry an EPA label, and tampering draws civil penalties up to US$44,539 for makers and dealers. UK law applies the Stage V limits of Regulation (EU) 2016/1628, with civil penalties up to £50,000 per offence.
Checked against the sources at the bottom of this page on October 19, 2026. Rules, fees and pay change: the source has the last word.
This page reports what the official source says. It is not legal advice: ask the office named here. The US texts are the EPA nonroad diesel page and 40 CFR 1039.135 and 1068.101. The UK texts are the Non-Road Mobile Machinery (Type-Approval and Emission of Gaseous and Particulate Pollutants) Regulations 2018 and Regulation (EU) 2016/1628 as published on legislation.gov.uk.
US Tier 4 and the EPA regulations
EPA describes its nonroad compression-ignition (diesel) rules as covering engines in excavators and other construction equipment, farm tractors, forklifts, airport ground service equipment, and utility equipment such as generators, pumps and compressors. EPA has adopted multiple tiers of standards. The Tier 4 standards pair engine controls with fuel controls, and engine makers meet them with advanced emission control technology. EPA also adopted requirements for in-use diesel fuel, because sulfur can damage those emission control devices.
EPA's page sorts the rules by part of the Code of Federal Regulations.
| 40 CFR part | What EPA says it holds |
|---|---|
| Part 1039 | Tier 4 emission standards and certification requirements |
| Part 1065 | Exhaust emission test procedures, for lab and in-field testing |
| Part 1068 | General compliance provisions |
The engine label
Section 1039.135 requires the maker to give each engine a unique identification number, engraved or stamped, and a permanent label. The label carries the heading EMISSION CONTROL INFORMATION. It lists these items.
- The maker's full corporate name and trademark.
- EPA's designation for the engine family.
- The power category that sets the applicable standards.
- The engine displacement in litres, unless every engine in the family shares it.
- The date of manufacture, which may instead be stamped elsewhere on the engine.
- The emission-control system, in the terms of 40 CFR 1068.45.
- For diesel engines, the words ULTRA LOW SULFUR FUEL ONLY, with exceptions the section lists.
- The statement THIS ENGINE COMPLIES WITH U.S. EPA REGULATIONS FOR [MODEL YEAR] NONROAD DIESEL ENGINES.
If installing the engine in equipment hides the label so it cannot be read during normal maintenance, a duplicate label goes on the equipment. The section applies this to the maker and to anyone else who installs the engine.
The tampering prohibition
Section 1068.101(b)(1) states that no one may remove or render inoperative any device or element of design installed on or in an engine to comply with the regulations. After sale, the bar covers removal done knowingly. The text names operating an engine without a supply of appropriate urea, where the emission control system relies on it, and using fuel or oil that renders the system inoperative.
Exceptions cover repairs where the engine is restored to proper function afterwards, and temporary emergencies where it is restored as soon as possible. The section also bars knowingly selling or installing a component that bypasses, impairs, defeats or disables emission controls.
| Violation | Maximum |
|---|---|
| Selling or introducing a new engine or equipment without a certificate and label | US$44,539 per engine or piece of equipment |
| Tampering by a manufacturer or dealer | US$44,539 per engine or piece of equipment |
| Tampering by anyone else | US$4,454 per engine or piece of equipment |
| Defeat device | US$4,454 per component |
The section says these maximums apply as of August 1, 2016, and may be adjusted under 40 CFR part 19.
UK NRMM Regulations 2018
The Regulations were made on 25 June 2018 and came into force on 21 September 2018. They make the Secretary of State the approval authority and the market surveillance authority for Regulation (EU) 2016/1628, the NRMM Regulation.
Schedule 1 makes an economic operator guilty of an offence for breaking any prohibition or requirement in the Regulations or in the NRMM Regulation. An economic operator is the manufacturer, the manufacturer's representative, the importer or the distributor. Regulation 14 treats an engine with a defeat device that is placed on the UK market as a separate offence for each engine.
- Criminal penalty: on summary conviction, a fine in England and Wales, and a fine up to level 5 on the standard scale in Scotland or Northern Ireland.
- Civil penalty: the enforcement authority may require a penalty of up to £50,000 per offence, if satisfied on a balance of probabilities.
- No civil penalty where the person shows a reasonable excuse or criminal proceedings have started for the same offence.
- A penalty notice sets a payment date at least 28 days after it is given, and the recipient has 28 days to object.
Stage V limits in Regulation (EU) 2016/1628
The NRMM Regulation applies to engines installed or meant for non-road mobile machinery. It defines that as any mobile machine, transportable equipment or vehicle not intended to carry passengers or goods on roads. It excludes engines propelling road vehicles, agricultural and forestry tractors, and stationary machinery.
Article 18 bars engine types from exceeding the Stage V limit values in Annex II, from the dates in Annex III. It requires emission control strategies built to prevent tampering to the extent possible and prohibits defeat strategies. Article 32 requires the maker to affix a statutory marking to each engine. Article 15(4) has the OEM affix a visible duplicate where the marking is not visible without removing parts. Annex II sets these compression-ignition limits for category NRE.
| Power range | Limits as printed |
|---|---|
| 19 kW up to 37 kW | CO 5.00; HC + NOx 4.70; PM 0.015; PN 1 x 10^12 per kWh |
| 37 kW up to 56 kW | CO 5.00; HC + NOx 4.70; PM 0.015; PN 1 x 10^12 per kWh |
| 56 kW up to 130 kW | CO 5.00; HC 0.19; NOx 0.40; PM 0.015; PN 1 x 10^12 per kWh |
| 130 kW to 560 kW | CO 3.50; HC 0.19; NOx 0.40; PM 0.015; PN 1 x 10^12 per kWh |
Sources
- US EPA, Regulations for emissions from heavy equipment with compression-ignition (diesel) engines, read October 19, 2026
- US eCFR, 40 CFR 1039.135 How must I label and identify the engines I produce, read October 19, 2026
- US eCFR, 40 CFR 1068.101 What general actions does this regulation prohibit, read October 19, 2026
- The Non-Road Mobile Machinery (Type-Approval and Emission of Gaseous and Particulate Pollutants) Regulations 2018, SI 2018/764, as made, read October 19, 2026
- Regulation (EU) 2016/1628, UK version, legislation.gov.uk, read October 19, 2026