ArbNation Join free

Tree Care Industry Association safety training materials and the ANSI Z133 training requirements

The Tree Care Industry Association lists safety programmes and materials: CTSP, EHAP, Tree Care Academy, Accident Briefs and Tailgate Safety. OSHA's 29 CFR 1910.269 sets the federal training rules for line-clearance tree trimmers.

Checked against the sources at the bottom of this page on October 21, 2026. Rules, fees and pay change: the source has the last word.

This page reports what the official source says. It is not legal advice: ask the office named here. The Tree Care Industry Association (TCIA) describes its own programmes on its Safety page. OSHA's Tree Care Industry page and the federal rule 29 CFR 1910.269 cover the federal side. The International Society of Arboriculture (ISA) announces the Z133 edition.

The TCIA safety programmes

TCIA's Safety page opens with the line that tree care is safe if you know what you are doing. It lists these programmes and materials.

ProgrammeWhat TCIA says about it
Certified Treecare Safety Professional (CTSP)The only safety credentialing programme in the industry, meant to address safety challenges that tree care companies face. TCIA describes the ideal CTSP as having coaching traits: good communication, strong instructional skills and model behaviour
Electrical Hazards Awareness Program (EHAP)TCIA says electricity causes about 15 percent of all fatalities in the tree care industry and is the leading cause of worker fatalities. It calls the programme a great way to keep workers safe and document training, and lists OSHA compliance among its aims, with certificates that can be checked
Tree Care AcademyModules in three categories: foundation, intermediate and advanced. TCIA describes it as a way to verify that OSHA and ANSI Z133 required training has been performed
Accident BriefsA monthly summary in TCI Magazine, taken from published reports or reported to TCIA staff, which TCIA suggests for tailgate meetings
Tailgate Safety, 7th EditionA company that buys it may register up to three users for unlimited online access to the training materials and other Tailgate resources

The TCIA page mentions "ANSI Z133 required training" only in passing, in the Tree Care Academy entry. It does not list the Z133 training clauses.

OSHA's tree care page

OSHA's Tree Care Industry overview describes tree care companies as providing pruning, removal, plant health care, cabling and bracing, transplanting, consulting, fertilization and lightning protection. It states that tree care hazards are addressed in specific OSHA standards for recordkeeping and general industry. It links to the Tree Care Operations rulemaking. It also links to OSHA publications: Solutions for Tree Care Hazards (Publication 3940, 2018), Electricity and Tree Care Work, A Deadly Combination (Pamphlet 3861, 2016) and Tree Care Work, Know the Hazards (Publication 3752, December 2014). The page carries no ANSI Z133 wording.

Training in 29 CFR 1910.269

Section 1910.269 covers power generation, transmission and distribution work. Paragraph (a)(1)(i)(E) brings in line-clearance tree trimming done to clear space around electric lines or equipment, on behalf of an organisation that operates or controls those lines. The whole section, except paragraph (r)(1), applies to such trimming when qualified employees do it. A shorter list of paragraphs applies when line-clearance tree trimmers who are not qualified employees do it: (a)(2), (a)(3), (b), (c), (g), (k), (p) and (r).

Under paragraph (a)(2)(i), every employee doing covered work is trained in the safety-related work practices, procedures and requirements for the job, and in other safety practices that relate to the work, including emergency procedures such as pole-top and manhole rescue. The degree of training is set by the risk of the hazard. Paragraph (a)(2)(iii) adds that a line-clearance tree trimmer who is not a qualified employee is also trained and competent in three things:

  • telling exposed live parts from other parts of electric equipment;
  • determining the nominal voltage of exposed live parts;
  • the minimum approach distances for the voltages involved, and the skills to keep them.

Further provisions in the same paragraph (a)(2) fill in the training rules. The employer determines compliance through regular supervision and inspections at least once a year. Retraining follows non-compliance found that way, new technology or procedures, or work practices not normally used in the job. OSHA's note treats tasks done less often than once a year as needing retraining first. Training is classroom or on-the-job, and an employee must demonstrate proficiency before the training counts as complete.

Paragraph (b)(1) sets first-aid training. For field work by two or more employees on or near energised lines or equipment of 50 volts or more, at least two trained persons are to be available. For non-qualified line-clearance trimmers, one trained person is enough if all new employees are trained in first aid within 3 months of hire.

The Z133 edition

ISA's newsroom item of June 4, 2026 announces the Z133-2026 Safety and Health Requirements standard as available. ISA also lists Z133-2026 among its publications. The Z133 clauses on training are published by the standards body, and none of that text is repeated here.

Sources