ArbNation Join free

Tree work safety standards register: Z133, ASTM F887, ISO 11681-1 and BS EN 12492 with edition and status

Seven tree work safety standards, with the number, title, edition and status as each publisher prints them. ANSI Z133-2026 and BS EN 12492:2025 are current, BS EN 381-9 was withdrawn on 1 August 2019, and ISO 11681-1 is in its fourth edition.

Checked against the sources at the bottom of this page on October 15, 2026. Rules, fees and pay change: the source has the last word.

This page reports what the official source says. It is not legal advice: ask the office named here.

The register

Tree work safety standards with edition and status
StandardEdition, status and publisher
ANSI Z133, Arboricultural Operations safetyZ133-2026 approved by ANSI. The 2017 edition was effective until 27 May 2026. International Society of Arboriculture (ISA)
ASTM F887-23, Personal Climbing Equipment2023 edition, 34 pages. ASTM International, Committee F18
ISO 11681-1:2022, Machinery for forestry, portable chain-saws, Part 1: chain-saws for forest serviceEdition 4, published March 20, 2022. Current. ISO, committee ISO/TC 23/SC 17
BS EN ISO 11681-1:2022, same titlePublished 30 June 2022. Current. British Standards Institution (BSI), committee AGE/29
BS EN 12492:2025, Mountaineering equipment, helmets for mountaineersPublished 31 October 2025. Current. BSI
BS EN 381-9:1997, Chain saw protective gaitersPublished 15 September 1997. Withdrawn 1 August 2019. BSI
BS 3998, Recommendations for Tree WorkLatest year 2010, oldest 1966, 3 revisions, per the UMass database. BSI Standards Publication

ANSI Z133

The full title is American National Standard: Safety and Health Requirements for Arboricultural Operations. ISA calls the Z133 a United States safety standard for use across the arboriculture industry. The Z133-2026 edition has been approved by ANSI and is available through the ISA web store in English and Spanish, and the 2017 edition was effective until 27 May 2026. The UMass and TREE Fund database, last updated April 2, 2020, records the Z133 as an industry standard from ISA with a latest publication year of 2017, an oldest year of 1972 and 8 revisions.

ASTM F887-23

ASTM lists the standard under Book of Standards Volume 10.03, developed by subcommittee F18.15, with ICS code 97.220.40. Its scope clause covers the specifications and qualification testing of climbers, climber straps, pads and footplates, body belts, work positioning devices with locking snaphooks or carabiners, wood pole fall restriction devices, arborist saddles, harnesses and energy absorbing lanyards. ASTM says these devices are used by workers climbing poles, trees, towers and other structures. The scope also includes minimum performance criteria for harnesses and energy absorbing lanyards in arresting a fall after exposure to electric arcs.

ISO and BSI chain-saw standard

The SNV-Connect shop page for ISO 11681-1:2022 lists four editions: 1996, 2004, 2011 (withdrawn) and 2022 (current, stage 60.60). The 2022 edition revises the 2011 one and has been adopted as NF EN ISO 11681-1:2022. The abstract covers safety requirements and verification measures for the design, construction, transporting and commissioning of portable, combustion-engine, hand-held chain-saws. They are intended for forest work by one operator, right hand on the rear handle and left on the front. Dismantling and scrapping are not covered. It deals with all significant hazards except kickback and balance for machines with an engine displacement over 80 cm3, and it applies to chain-saws made after its publication date.

BSI's page for BS EN ISO 11681-1:2022 gives the same scope and states that the document is identical to ISO 11681-1 and EN ISO 11681-1. BSI recommends this version for organisations operating in or with the UK.

Helmets and chain saw clothing

BS EN 12492:2025 specifies requirements and test methods for protective helmets for use in mountaineering, to reduce the risk of impact injury. It also applies to helmets used in activities with similar hazards, including climbing, caving, canyoning, rope courses and via ferrata climbing. It does not apply to helmets for ski mountaineers, which fall under EN 18100:2025. BS EN 381-9, for chain saw protective gaiters, is identical to EN 381-9:1997 and is withdrawn.

Other registers sit in the standards register, the guide to helmets by standard and the guide to chainsaw standards by country.

Sources