Trees and air quality: what Forest Service and UF/IFAS research reports on pollution removal and emissions
A Forest Service model puts removal by US urban trees at 711,000 metric tons of pollutants a year. The same research finds city air improves by under 1 percent, and trees also emit volatile compounds that feed ozone.
Checked against the sources at the bottom of this page on October 19, 2026. Rules, fees and pay change: the source has the last word.
Trees take pollutants out of the air and also put some compounds into it. The four sources below cover both sides: the removal estimates, the size of the effect on city air, and the caution on volatile organic compounds.
National removal estimate
David Nowak, Daniel Crane and Jack Stevens of the Forest Service modelled hourly weather and pollution data for the lower 48 states and 55 cities. Their paper in Urban Forestry and Urban Greening, volume 4, 2006, estimates that urban trees and shrubs remove 711,000 metric tons of air pollution a year, valued at US$3.8 billion. The pollutants are ozone, particulate matter under 10 microns (PM10), nitrogen dioxide, sulfur dioxide and carbon monoxide.
Total removal varied by city, from 11,100 tons a year (US$60.7 million) in Jacksonville, Florida to 22 tons a year (US$116,000) in Bridgeport, Connecticut. Removal per square metre of tree cover ran from 23.1 grams a year in Los Angeles to 6.2 grams in Minneapolis, with a median of 10.8. The paper calls the model a first-order estimate and used pollution data from 1994.
How much city air improves
The same paper reports that the average improvement in air quality in cities during daytime in the leaf-on season was usually under 1 percent. It was greatest for particulate matter, ozone and sulfur dioxide. In areas of 100 percent tree cover, such as contiguous forest stands, average daytime improvement was around 2 percent for those three. Short-term, one-hour improvements in such areas were estimated as high as 16 percent for ozone and sulfur dioxide, 9 percent for nitrogen dioxide, 8 percent for particulate matter and 0.03 percent for carbon monoxide.
The paper adds that particles caught on leaves are often resuspended in the air, washed off by rain or dropped with leaves and twigs, so vegetation holds many particles only temporarily.
How trees remove gases and particles
Escobedo, Seitz, Zipperer and Iannone describe two routes in UF/IFAS Extension publication FR278. Gases enter through the leaf stomata and are absorbed inside the leaf. Particles are intercepted and held on leaf surfaces. Their Gainesville case study used field data from 93 sites and hourly pollution and weather data for 2000.
The study reports that an average square metre of tree cover in Gainesville removes 6 grams of pollutants a year. Removal was greatest for ozone, followed by PM10, sulfur dioxide, nitrogen dioxide and carbon monoxide. Trees removed 390 metric tons of pollution in 2000, worth around US$2 million in economic benefits.
The caution on volatile compounds
UF/IFAS states that trees emit volatile organic compounds and that tree maintenance causes its own emissions. Both can contribute indirectly to ozone and other pollutants. The factsheet adds that certain trees produce these compounds at high summer temperatures, and that they react with existing pollution to form smog. It also says shade can lower temperatures and so reduce the chance of smog forming.
Nowak's slides, hosted in the EPA archive, report an earlier modelling result for the northeastern United States. More urban tree cover reduced daytime ozone in cities by about 1 part per billion and raised it regionally by 0.3 parts per billion, particularly downwind. Tree removal of nitrogen oxides increased ozone at night. Tree VOC emissions had no detectable effect, under 1 part per billion, on ozone in that study. The slides list low VOC emissions, large leaf area, high transpiration and evergreen habit among beneficial characteristics.
A 2016 review in the Journal of Environment Quality, by Calfapietra, Nowak, Fares and colleagues, covers ozone removal by urban and peri-urban forests. It compares laboratory, field and modelling approaches. The authors conclude that combining all three is needed to estimate ozone removal by urban trees.
Management lists in the UF/IFAS factsheet include sustaining large healthy trees, planting in polluted or heavily populated areas, and using pines and evergreen hardwoods for year-round particle removal. For related reading, see the guide to trees and urban heat and the guide to the i-Tree tools.
Sources
- Nowak, Crane and Stevens, Air pollution removal by urban trees and shrubs in the United States, Urban Forestry and Urban Greening 4, 2006, i-Tree copy, read October 19, 2026
- University of Florida IFAS Extension, Escobedo and others, Air Pollution Removal and Temperature Reduction: A Case Study of Gainesville's Urban Forest, FR278, read October 19, 2026
- U.S. EPA archive, David Nowak, USDA Forest Service, Vegetation Characteristics and Pollution Removal, slides, read October 19, 2026
- USDA Forest Service Treesearch, Calfapietra and others, Removal of Ozone by Urban and Peri-Urban Forests, Journal of Environment Quality 45(1), 2016, read October 19, 2026