UIAA safety standards for ropes, slings, connectors and harnesses and the EN behind each
UIAA 101 is based on EN 892, 104 on EN 566, 105 on EN 12277, 121 on EN 12275 and 126 on EN 567. The UIAA documents name the EN in their forewords.
Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.
This page reports what the official source says. It is not legal advice: ask the office named here. The office is the UIAA, the International Climbing and Mountaineering Federation, which publishes the standards below from Bern, Switzerland.
How the UIAA relates to CEN
The UIAA's safety standards page dates its first standard to 1960, with the testing of ropes. It has since developed standards for over 25 types of safety equipment. It works with CEN, the European Committee for Standardization, to harmonise standards. In some cases the UIAA asks for additional tests, making a standard stricter than the CEN one, so the two may differ slightly.
The forewords follow one pattern. Each UIAA standard names an EN as its basis and adds requirements of its own on top. The UIAA documents do not reproduce the full EN requirements. The UIAA 126 foreword points to the CEN website for buying the EN.
Standards with the EN named in the UIAA document
| UIAA standard | EN named as the basis | Document read |
|---|---|---|
| 101 Ropes | EN 892:2012 with A3:2023 | 9th edition, July 2025 |
| 104 Slings | EN 566:2017 | February 2018 |
| 105 Harnesses | EN 12277:2015 | February 2018 |
| 121 Connectors | EN 12275:2013 | February 2018 |
| 126 Rope Clamps | EN 567:2013 | 3rd edition, December 2025 |
The UIAA 101 document is titled Dynamic Ropes, and the UIAA 121 document is titled Connectors / Karabiners. UIAA 121 sets extra requirements over EN 12275:2013, among them a minimum load of 8 kN for type K connectors in an edge test. UIAA 126 adds requirements to those of EN 567:2013.
Other numbers on the UIAA index
The index lists more rope and sling items by number and title. It does not name an EN for them.
| UIAA number | Title on the index |
|---|---|
| 102 | Accessory Cord |
| 103 | Tape |
| 107 | Low Stretch Ropes |
| 109 | Belay Lanyards |
| 110 | Static Ropes (marked Coming Soon) |
| 127 | Pulleys |
The EN side in the BSI catalogue
BSI lists BS EN 12275:2013, Mountaineering equipment. Connectors. Safety requirements and test methods, as published on 30 April 2013 and current. The scope covers connectors for use in mountaineering, climbing and related activities, as part of the safety system that protects the climber from a fall from height. The BSI entry is identical to EN 12275:2013, the edition UIAA 121 names.
Standards for other kinds of gear are covered in the guide to climbing gear standards by item.
Sources
- UIAA, Safety Standards index page, read October 16, 2026
- UIAA 126 Rope Clamps, Third Edition, December 2025 (version 3.1), read October 16, 2026
- UIAA 101 Dynamic Ropes, Ninth Edition, July 2025 (version 9.1), read October 16, 2026
- UIAA 104 Slings, February 2018, read October 16, 2026
- UIAA 105 Harnesses, February 2018, read October 16, 2026
- UIAA 121 Connectors / Karabiners, version 4, February 2018, read October 16, 2026
- BSI Knowledge, BS EN 12275:2013 Connectors, read October 16, 2026