The Urban FIA: how the Forest Service samples urban forests
Urban FIA measures a city's trees on randomly placed plots, one 1/6-acre circle per hexagonal grid cell. The Forest Service aims for about 200 plots in each city.
Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.
This page draws on what the Forest Service, the Wisconsin Department of Natural Resources and the i-Tree partnership publish. It is not training and does not teach the work.
The Forest Service's Urban Forest Inventory and Analysis (Urban FIA) Field Guide, published February 9, 2026 and last updated June 25, 2026, sets the standards, codes, methods and definitions for Urban FIA field data. Its stated aim is procedures that are consistent and uniform across all FIA units. Regional programs may add variables but may not change or add to the nationally standard requirements. Items marked URBAN OPTIONAL are collected only where a unit chooses, and then as the guide specifies.
The guide expects a one or two-person crew to measure all items on a plot in less than one day, including travel time.
Plot design
The Forest Service's sampling and estimation paper of October 2024 says Urban FIA uses hexagonal grid-based systematic sampling, with random plot placement inside each grid cell. The aim is about 200 plots per city. Evidence cited in the paper suggests 200 plots balances logistics and cost against the accuracy of the estimates.
| Part | Size | What is tallied |
|---|---|---|
| Main plot | 1/6 acre circle, radius 48.0 feet | Live and standing dead trees 5.0 inches or more in diameter at breast height or at root collar |
| Four microplots | 1/300 acre each, radius 6.8 feet, offset 12 feet in the four cardinal directions | Live and standing dead saplings 1.0 inch through 4.9 inches |
Trees are defined from a regional species list that includes exotic and ornamental trees not normally seen on rural forest land. Woody perennials that miss the size limits count as shrubs.
Measurements on each plot
The sampling paper lists the field measurements. Crews take diameter at breast height, 4.5 feet above the ground, or diameter at the root collar for woodland species. They also record species, tree length, status, health and damages.
Crown records include crown ratio, crown class, light exposure, dieback, diameter and absence of foliage. Crews note whether a tree stands in a maintained or riparian area. They also note whether it is a street tree, defined as within 8 feet of the edge of a maintained surface roadway, or a planted tree.
For trees over 20 feet tall within 60 feet of a residential building, crews record distance and direction to the building. The data estimate the tree's effect on building energy use. On each plot they also estimate percent cover for trees and saplings, shrubs, buildings, impervious and permeable surfaces, herbaceous vegetation and water.
Wisconsin's account of how plots are placed
The Wisconsin Department of Natural Resources FAQ describes its state program. Milwaukee and Madison are each divided into 200 polygons of equal area, with a random sample location in each. Urban areas outside those two cities are sampled at 1 plot for every 1,200 acres. Plots fall on public and private land.
Contract crews collect the data, and FIA trains and certifies every crew. About one-seventh of the plots are remeasured each year, so each point is revisited every seven years. Milwaukee and Madison plots were established by the end of 2021 and statewide plots by the end of 2022.
Landowners are contacted for access, and crews do not collect data without the landowner's express consent. Crews usually spend 1 to 2 hours on site and do not need to enter buildings. Because plots are placed at random, some fall where there are no trees.
Data from a specific property are not made public, and it is illegal to release FIA data that can be linked to a specific landowner. The FAQ separates Urban FIA from a street tree inventory. A street inventory usually covers all managed trees along street rights-of-way. Urban FIA plots can fall in backyards, parks or any other land use.
Uncertainty in the estimates
The sampling paper explains that every estimate carries a standard error (SE). The estimate plus or minus 1 SE is a roughly 68 percent confidence interval, 2 SE is 95 percent and 3 SE is 99 percent. For an estimate of 1,000 trees with an SE of 100, the city reports 1,000 trees plus or minus 10 percent.
The number of plots, the plot size and the variability of the attribute drive the SE. Microplot estimates vary more because the plots are smaller. Subdividing by land use or species also raises the SE.
The paper adds two cautions. Many estimates come from models built for forest settings, which may not reflect urban conditions. Change between measurement cycles can also come from sample changes, such as a landowner who denied access one cycle and allowed it the next.
The link to i-Tree Eco
The i-Tree Eco page describes version 6 as software that takes data from single trees, complete inventories or randomly located plots, plus local hourly air pollution and weather data. It quantifies forest structure, environmental effects and value to communities. Eco has two project types, complete inventory and sample inventory. A sample inventory uses random plots when the study area is too large to inventory every tree.
The Forest Service sampling paper lists the crown measurements needed for i-Tree Eco processing: live crown ratio, crown diameter, foliage absent, crown light exposure and crown dieback. A notice on the i-Tree page says a change in USDA Forest Service policy has indefinitely halted traditional funding for i-Tree.
Sources
- USDA Forest Service, Urban Forest Inventory and Analysis Field Guide, published February 9, 2026, last updated June 25, 2026, read October 16, 2026
- Baer, K. C. and others, Additional sampling and estimation details for urban forest inventory and analysis reports (version 1), USDA Forest Service Northern Research Station, October 2024, read October 16, 2026
- Wisconsin Department of Natural Resources, Urban Forest Inventory and Analysis frequently asked questions, read October 16, 2026
- i-Tree, i-Tree Eco tool page (USDA Forest Service partnership), read October 16, 2026