ArbNation Join free

US Forest Service sawyer classes A, B and C in Forest Service Manual 2358

Forest Service Manual 2358 sets three sawyer classes for chain saws and crosscut saws. A works under immediate supervision, B cuts alone in moderately complex situations, C in complex ones. Cards last three years.

Checked against the sources at the bottom of this page on October 15, 2026. Rules, fees and pay change: the source has the last word.

The named codes and training bodies are described here as published. It is not training and does not teach the work.

Where the classes are defined

The classes sit in Forest Service Manual chapter 2350, section 2358, the Saw Program. A 2015 draft of the directive says it supersedes all regional supplements to Forest Service Handbook 6709.11, section 22.48. The Forest Service amended the section on March 6, 2023, and again with an amendment effective March 29, 2023. The 2023 text moved the class limits into Exhibit 01 of section 2358.06e, and it carries the same direction on PPE and safety that used to sit in the handbook, removed in 2018.

The manual applies on National Forest System lands. It does not apply to other government agencies, contractors or crews working under interagency fire cooperative agreements.

The classes side by side

Class limits as Exhibit 01 of section 2358.06e words them (2023)
ClassResponsibilities and limitations
Crosscut sawyer traineeMay occasionally assist with double bucking. No felling. At least 16 years old, under immediate supervision of a B or C sawyer
A, bucking onlyMay buck, limb and brush in the least complex situations under immediate supervision of a B or C sawyer bucking only. May not fall trees
A, felling and buckingMay fall, buck, limb and brush in the least complex situations under immediate supervision of a B or C sawyer felling and bucking
B, bucking onlyIndependent bucking and limbing in moderately complex situations. No felling. Bucking at the C level only under immediate supervision of a C sawyer
B, felling and buckingIndependent felling, bucking and limbing in moderately complex situations. Work at the C level only under immediate supervision of a C sawyer
C, bucking onlyIndependent bucking and limbing in complex situations; supervision of A and B sawyers bucking, plus instruction and evaluation of bucking
C, felling and buckingIndependent limbing, bucking and felling in complex situations; supervision, instruction and evaluation of all sawyers

The manual defines immediate supervision as on-site supervision with a clear view and control of the sawing operation, so the supervisor can warn, advise or assist. A sawyer may work outside the card limits only in formal training and evaluation, or under the immediate supervision of a higher-qualified sawyer.

Size limits

The 2023 exhibit sets limits by complexity, not by stem diameter. The manual defines complexity by tree species and crown, amount of material, size, lean, binds, fiber condition, topography and stability. The 2015 draft wording described B and C sawyers as buckers and fallers of "any size material" within the restrictions on their cards. Neither text sets a diameter cap for a class.

Expiry and re-evaluation

A National Sawyer Certification Card is valid for three years and is subject to review at any time before it expires. Re-evaluation has two minimum parts: a knowledge refresher on current saw directives, evaluation practice, saw safety and cutting techniques, and a skill refresher with a field proficiency evaluation at the level sought. Instructors must also run at least one training course or refresher every three years. Evaluators must run at least one field evaluation every three years. The 2025 provisional standard adds that a sawyer staying at the same level may be re-evaluated on a single operation, bucking or felling.

The manual lists four grounds for revoking a certification. They are failing to show safe cutting procedure, lacking the knowledge or skill for the current level, lacking the physical ability to saw safely, and an accident review finding the sawyer acted outside the certification level.

Who evaluates and instructs

  • A level: evaluated by a C sawyer, by a B sawyer holding a designation letter from the unit saw coordinator, or by an approved training consultant.
  • B level: evaluated by a C sawyer or an approved training consultant.
  • C level: evaluated by two evaluators, one of them qualified as a C Sawyer Evaluator and the other a C sawyer or a training consultant.
  • Instructors: certified at C level, or at B level with a letter of designation from a Unit Saw Program Coordinator.

The provisional 2025 evaluation standard calls the A sawyer an apprentice. It expects the B sawyer to work without supervision and to show strong judgment on walk-away situations. It calls the C sawyer an advanced sawyer and role model. Evaluation tasks are listed for each class, including a minimum of three high-complexity trees felled by a C candidate.

Sources