ArbNation Join free

The Trunk Formula Technique of tree valuation: trunk area, unit cost and three depreciation ratings

The trunk formula prices a large tree from its trunk area, a regional nursery unit cost and three ratings: condition, functional limits and external limits. The descriptions come from Purdue Extension, the Ohio Chapter of the ISA and an ISA journal study.

Checked against the sources at the bottom of this page on October 9, 2026. Rules, fees and pay change: the source has the last word.

This page reports what the official source says. It is not legal advice: ask the office named here. The Trunk Formula Technique (TFT) facts on this page come from Purdue University Extension, the Ohio Chapter of the International Society of Arboriculture (ISA) and the ISA journal. Nothing here values a tree or gives a unit cost. The unit costs in the sources are regional survey figures for one state and one period. Other methods are compared on the page comparing CAVAT and i-Tree Eco.

Where the technique sits

Purdue Extension covers the Guide for Plant Appraisal, 10th edition, written by the Council of Tree and Landscape Appraisers (CTLA) and published by the ISA. The Guide describes three approaches to appraising trees and landscapes: the cost approach, the income approach and the sales comparison approach. The TFT is one technique inside the cost approach, used for larger trees in the landscape. It extrapolates the cost of buying the largest commonly available nursery tree up to the size of the tree being appraised. Trees under 4 caliper inches, or an 8-foot conifer, are figured at retail cost instead.

The Ohio Chapter's guide dates the 10th edition to 2019 and notes it made notable changes from earlier editions. The 10th edition names two techniques for trees larger than a local nursery sells: the TFT and the cost compounding technique. The Ohio guide adds that the TFT is one tool for some situations and not the preferred tool for all of them.

The steps as Purdue lists them

StepPurdue Extension's wording
Basic reproduction costThe cross-sectional area (CSA) of the tree times the unit tree cost (UTC) set by the Regional Plant Appraisal Committee (RPAC) or taken from the local wholesale cost
Depreciated reproduction costThe condition rating times the functional limitations rating times the external limitations rating times the basic reproduction cost
Total additional costsClean-up, installation and maintenance, counted when a tree is removed and a new one installed with post-planting care for a set time
Total reproduction costThe depreciated reproduction cost plus the total additional costs
Appraisal valueThe total reproduction cost, rounded

Purdue gives the trunk area as the radius squared times 3.14, from the diameter at breast height measured 4.5 feet above the ground. The Ohio guide gives the same area as 0.7854 times the diameter squared. For rounding, it says to carry two decimal places through every step and round only the final result, to 3 or 2 significant figures. Purdue's worked example rounds to the nearest thousand.

The three depreciation ratings

Purdue and the Tree Care Industry Association's magazine, in an article by the same Purdue author, describe the three ratings in the same words. Condition is the health of the tree as a whole: vigour, pests, stress symptoms, and the structure and form of the branches. Functional limitations are factors tied to the tree or its site that may limit growth and health. Examples are nearby utility lines that force clearance pruning, or poor branch systems, pest susceptibility or invasive tendencies of the species. External limitations are matters outside the owner's control, such as water availability, pest threats, utility vegetation management conflicts. Purdue adds local ordinances, easements and rights of way. The appraiser assigns a rating to each of the three and multiplies the basic cost by them.

The Ohio supplement

The Ohio Chapter's Guide to Appraisal of Trees and Other Plants in Ohio, eighth edition of 2020, is a supplement to the 10th edition and not an alternative to it. The Ohio committee surveyed 14 wholesale nurseries in late 2019 and early 2020 on several species. It found the largest commonly available nursery-grown tree to be about 3 and a half inches in trunk caliper, measured 6 inches above grade. The unit cost is defined as the wholesale cost to a landscape professional, without transport or installation, and the committee plans to update the data at least every two years. The guide warns against using nursery-based unit costs for trees in natural woodland, quoting the 10th edition on seedling costs for forestry or woodland settings. The TFT in the 10th edition does not apply a species percentage rating directly, as earlier editions did: species attributes enter through the functional limitations rating.

The earlier formula in the 2002 study

The 2002 Arboriculture and Urban Forestry study compared formula methods from five countries and described the US method of the time, the 8th edition. That method multiplied the trunk cross-sectional area at 4.5 feet by a value per square inch based on the largest commonly available nursery trees. It then reduced the figure by factors for species quality, condition and location, each from 0.0 to 1.0. In the study, the US method and the Helliwell method gave the lowest values.

Limits of the technique

Purdue calls the TFT only one way to appraise large trees, and its estimates may not be proportionate to the value of a property or to what would be paid for a tree. Studies estimate trees may account for up to 15 per cent of a residential property's value.

Sources