ArbNation Join free

Wood volume and weight conversion table: stere, cord, Hoppus and board feet

A cord is 128 cubic feet of ranked and well stowed wood in the Connecticut regulation, 3.625 cubic metres in FAO's roundwood table, and 3.6 in Measurement Canada's divisor. FAO prints stere, Hoppus and board-foot equivalents.

Checked against the sources at the bottom of this page on October 19, 2026. Rules, fees and pay change: the source has the last word.

This page reports what the official source says. It is not legal advice: ask the office named here. The unit definitions come from the Food and Agriculture Organization of the United Nations (FAO), Measurement Canada, the Connecticut Department of Consumer Protection and Teagasc, the Irish agriculture and food authority.

Volume units

Volume units as printed
UnitPrinted equivalentSource
Cubic foot0.02832 cubic metreFAO, Table 1
Stere, roundwood, stacked volume1 cubic metre, or 35.315 cubic feetFAO, Table 3
Stere, fuelwood, solid volume without bark0.65 cubic metre, or 23 cubic feetFAO, Table 2
Stere, pulpwood, solid volume without bark0.72 cubic metre, or 25.4 cubic feetFAO, Table 2
Cord, ranked and well stowed128 cubic feetConnecticut DCP, from NIST Handbook 130 section 2.4.1.2
Cord, roundwood, stacked volume3.625 cubic metres, or 128 cubic feetFAO, Table 3
Cord, fuelwood, solid volume without bark2.12 cubic metres, or 74.9 cubic feetFAO, Table 2
Cord, pulpwood, solid volume without bark2.55 cubic metres, or 90 cubic feetFAO, Table 2
1,000 stacked cubic feet of fuelwood18.41 cubic metres, or 650 cubic feet, solid volumeFAO, Table 2
Cubic metres to cordsDivide cubic metres by 3.6 to get cordsMeasurement Canada
Hoppus cubic foot0.03605 cubic metre, or 1.273 cubic feetFAO, Table 3
Fathom, roundwood, stacked volume6.1164 cubic metres, or 216 cubic feetFAO, Table 3
1,000 board feet (MBF), sawlogs and veneer logs4.53 cubic metres, or 160 cubic feet, solid volume without barkFAO, Table 2
1,000 board feet (MBF), sawnwood83.33 cubic feetFAO, Table 3
Loose cubic metreNo equivalent printed in these sourcesNone

Cords in Measurement Canada and Connecticut

Measurement Canada's infographic on measuring bulk firewood multiplies length, height and width of a rectangular stack. In centimetres it divides the result by 1,000,000 to get cubic metres, and then by 3.6 to get cords. In inches it divides by 1,728 to get cubic feet, and then by 128 to get cords. Its worked example is a stack of 96 by 48 by 12 inches, which comes to 32 cubic feet, or a quarter cord.

Connecticut's Department of Consumer Protection reprints the NIST Handbook 130 regulation on fireplace and stove wood. It defines "ranked and well stowed" as pieces placed in a line or row, touching and parallel to each other, and stacked in a compact manner. Wood is advertised, offered and sold only by the cord, fractions of a cord or the cubic metre. The regulation bars the terms "face cord", "rack", "pile", "truckload" and similar terms.

Packaged natural wood under 0.45 cubic metres (one-eighth cord or 16 cubic feet) shows its quantity in litres, cubic inches or cubic feet. A delivery ticket or sales invoice must be presented to the purchaser whenever non-packaged wood is sold. The department's Weights & Measures Division takes complaints about short cords of wood at (860) 713-6160.

Weights per cubic metre

FAO's Table 4 gives weight and volume pairs, with G for general, C for coniferous and NC for non-coniferous wood.

FAO weight and volume conversions
ProductKilograms per cubic metreCubic metres per metric tonne
FuelwoodG 725, C 625, NC 750G 1.38, C 1.60, NC 1.33
PulpwoodG 675, C 650, NC 750G 1.48, C 1.54, NC 1.33
Other industrial roundwoodG 750, C 700, NC 800G 1.33, C 1.43, NC 1.25
SawnwoodC 550, NC 700C 1.82, NC 1.48
Plywood6501.54
Particle board6501.64

FAO's Table 5 gives fuelwood energy: 9.4 gigajoules for 1 cubic metre of solid wood at 20 to 30 percent moisture content, 7.2 for solid green wood, and 5.0 for piled wood. COFORD's note on units for wood energy puts the bulk density of Sitka spruce chips at 206 kilograms per loose cubic metre at 30 percent moisture content. It is 320 at 55 percent, assuming a basic density of 380 kilograms per solid cubic metre.

Penn State Extension works out green weight as the mass of one cubic metre of dry wood times one plus the moisture content. The dry mass is basic specific gravity times 1,000 kilograms. Its oak and hickory example is 590 kilograms times 1.71, which comes to 1,009 kilograms per cubic metre, or 63 pounds per cubic foot. The Forest Products Laboratory's Wood handbook prints density in pounds per cubic foot by specific gravity and moisture content in its Table 4-6b. At specific gravity 0.50 it lists 31.2 at 0 percent, 34.9 at 12 percent and 62.4 at 100 percent. The USFS research note NRS-38 lists specific gravity for 156 North American tree species, on green volume and at 12 percent moisture content.

Stack volume in the Teagasc article

Teagasc multiplies stack width, stack length and average stack height to get gross volume, which includes the open spaces between logs. A conversion factor then turns gross volume into net volume, the volume of timber only. The article offers a sample grid of 0.7 by 0.7 metres or a standard factor. It prints the standard factor as 7 and calls it the most commonly used in the forest industry.

Sources