ArbNation Join free

Work health and safety codes for tree work in Australia: three state regulators

New South Wales published a 2026 Tree works code of practice. Victoria publishes a Working safely with trees guidance note, and WorkSafe Western Australia publishes a tree lopping checklist.

Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.

This page reports what the official source says. It is not legal advice: ask the office named here. Three state regulators publish the documents named below. It is not training and does not teach the work. Queensland, South Australia and Tasmania are not in the table, and Safe Work Australia's own guide is named by two regulators but is not summarised.

Three regulators, three kinds of document

StateDocument
New South WalesTree works code of practice, 2026, replacing the 1998 Amenity tree industry code of practice
VictoriaWorking safely with trees guidance note, published January 13, 2020, with a safety checklist
Western AustraliaTree lopping and gardening services checklist, a tool for duty holders

New South Wales

SafeWork NSW defines tree work as lopping, pruning, trimming, repairing, maintaining, transplanting and removing trees. It names seven major risks: falls from heights, being struck by falling objects, working around power lines, musculoskeletal disorders, noise, working with equipment and sun exposure.

Its tree work page links the Tree works code of practice as a PDF. It also links the code of practice for work near overhead power lines, a woodchipper guide and Safe Work Australia's Guide to managing risks of tree trimming and removal work.

A SafeWork NSW consultation page announces that the 2026 Tree works code of practice is published. The new code replaces the 1998 Amenity tree industry code of practice. SafeWork NSW describes it as giving information and guidance so that risks from tree works are managed under current work health and safety laws. The consultation survey on the draft closed on Sunday, December 7, 2025.

Victoria

WorkSafe Victoria's guidance note Working safely with trees is a two-page document, published January 13, 2020. Its listed contents are preparation and planning, working near overhead powerlines, working at height, working with chainsaws, falling objects, working with wood chippers and emergency procedures.

A WorkSafe news item of January 28, 2020 says the note was updated in consultation with the Victorian tree industry, arborist groups and Energy Safe Victoria, using information from SafeWork NSW and Safe Work Australia. It came after a coronial finding on a worker killed by a falling branch in 2017. The coroner noted research by the Coroners Prevention Unit that found 31 people died in Victoria from tree felling or related activity between January 2012 and September 2018, and that 13 of those deaths happened at work.

The note stresses planning and preparation, and the need to inspect each tree individually to find the safest method for the work. WorkSafe also published a basic safety checklist for the amenity tree and gardening services industry.

Western Australia

WorkSafe Western Australia's Tree lopping and gardening services checklist is addressed to duty holders and persons conducting a business or undertaking, including arborists, tree climbers, horticulturalists, gardeners, tree workers and landscapers. The checklist lists relevant considerations and does not cover all work health and safety requirements. A work health and safety management system is called helpful but not mandatory. The checklist points to Safe Work Australia's guide on managing risks of tree trimming and removal work.

The checklist has sections on these topics:

  • work health and safety management, including hazard and injury reporting and health and safety representatives under the Work Health and Safety Act 2020;
  • general safety, with an exclusion zone, a drop zone inside it and a spotter for trimming or sectional felling, and a rescue kit;
  • traffic management, including a two-tree length separation distance from roads and public accessways;
  • work platforms (EWPs), with the standard AS/NZS 1418:10 and an electrical test certificate within 6 months for insulation;
  • tree climbing, with a minimum of two persons, one climber and one ground person trained in aerial rescue;
  • wood chippers, chainsaws, other powered mobile plant, stump grinders, hazardous chemicals and personal protective equipment;
  • electricity and overhead powerlines, which refers to the Building and Energy publication Electrical safety for vegetation workers.

Where the three overlap

Victoria and Western Australia both name falling objects, overhead power lines, working at height, chainsaws and wood chippers. New South Wales names falls from heights, falling objects, power lines and working with equipment, and links a woodchipper guide. New South Wales publishes a code of practice, Victoria a guidance note and Western Australia a checklist, which are three different kinds of document. WorkSafe Western Australia and SafeWork NSW both point to the same Safe Work Australia guide.

Sources