ArbNation Join free

Work positioning, fall restraint and fall arrest: OSHA definitions and the EN 363 scope

OSHA defines positioning, travel restraint and personal fall arrest systems in 29 CFR 1910.140, and 1926.500 defines two of them for construction. BS EN 363:2018 names restraint, work positioning, fall arrest, rope access and rescue as its five system types.

Checked against the sources at the bottom of this page on October 21, 2026. Rules, fees and pay change: the source has the last word.

The three terms are restraint, work positioning and fall arrest. OSHA defines them in 29 CFR 1910.140, and 1926.500 defines two of them. The European standard EN 363 names them as system types.

OSHA 29 CFR 1910.140, general industry

The 1910.140 rule on personal fall protection systems defines the term "personal fall protection system" as a system, including all its components, an employer uses to provide protection from falling or to safely arrest an employee's fall if one occurs. It lists personal fall arrest systems, positioning systems and travel restraint systems as examples.

TermMeaning in 1910.140
Positioning system (work-positioning system)Equipment and connectors that, used with a body harness or body belt, allow an employee to be supported on a vertical surface above the ground, such as a wall or window sill, and work with both hands free. The rule also calls these "positioning system devices" and "work-positioning equipment".
Travel restraint systemAn anchorage, anchorage connector, lanyard or other means of connection, and body support that an employer uses to eliminate the possibility of an employee going over the edge of a walking-working surface.
Travel restraint (tether) lineA rope or wire rope that carries forces from a body support to an anchorage or anchorage connector in a travel restraint system.
Personal fall arrest systemA system used to arrest an employee in a fall from a walking-working surface. It consists of a body harness, anchorage and connector. The connection may include a lanyard, deceleration device, lifeline or a suitable combination.
AnchorageA secure point of attachment for equipment such as lifelines, lanyards or deceleration devices.

The figures that separate the systems in 1910.140

The rule sets different performance figures for each system. A personal fall arrest system limits the maximum arresting force on the employee to 1,800 pounds (8 kN). It brings the employee to a complete stop within a maximum deceleration distance of 3.5 feet (1.1 m). It is strong enough to withstand twice the impact energy of a 6 foot (1.8 m) free fall, or of the free fall distance the system permits. A general positioning system has a different test: it withstands a drop of a 250 pound (113 kg) weight through 4 feet (1.2 m) without failure. Window cleaners' positioning systems have their own 6 foot drop test.

OSHA 29 CFR 1926.500, construction

The construction rule defines fewer terms and words them differently. Its "positioning device system" is a body belt or body harness system rigged to allow an employee to be supported on a vertical surface above the ground, such as a wall, and work with both hands free while leaning. Its "personal fall arrest system" is a system used to arrest an employee in a fall from a working level. It consists of an anchorage, connectors, and a body belt or body harness, and may include a lanyard, deceleration device, lifeline or suitable combinations of these. The rule adds that, as of January 1, 1998, the use of a body belt for fall arrest is prohibited. It does not define travel restraint as a term.

BS EN 363:2018 scope

BSI's catalogue entry describes BS EN 363 as the European standard on personal fall protection systems. It specifies the general characteristics and assembly of such systems and gives examples of specific types. It covers the principles for assembling components into systems for restraint, work positioning, fall arrest, rope access and rescue. BS EN 363:2018 supersedes EN 363:2008, which is withdrawn. Among the technical changes, an explanation was added of why belts for work positioning on their own are not recommended.

The guide to words used in climbing codes covers the climbing terms, and falls from height in tree work covers the hazard.

Sources