ArbNation Join free

Worker induction and competence checks: what HSE, WorkSafeBC and OSHA publish

British Columbia lists 13 topics for a new worker's orientation, HSE names basic induction for new recruits, and OSHA 1910.269 requires employees to show proficiency before training counts as complete.

Checked against the sources at the bottom of this page on October 19, 2026. Rules, fees and pay change: the source has the last word.

This page reports what the official source says. It is not legal advice: ask the office named here.

HSE leaflet on health and safety training

HSE's leaflet INDG345, a brief guide to training, states the legal base. The Health and Safety at Work etc Act 1974 requires the employer to provide the information, instruction, training and supervision necessary, so far as is reasonably practicable, for employees' health and safety. The Management of Health and Safety at Work Regulations 1999 identify situations where training is particularly important, such as when people start work.

New recruits are among those with particular needs. They need basic induction training into how to work safely, including arrangements for first aid, fire and evacuation. Young employees are particularly vulnerable to accidents, and new, inexperienced or young employees need adequate supervision.

Training must be given during working hours and not at the employees' expense. Methods include coaching or on-the-job training, the classroom, open and distance learning, and computer-based or interactive learning. Keeping training records can help manage training, and monitoring them lets refresher training be given when needed. HSE states that its guidance is not compulsory unless it says so.

British Columbia: sections 3.22 to 3.25

Section 3.22 of the Occupational Health and Safety Regulation defines a new worker as any worker new to the workplace. It also covers a worker returning to a workplace where the hazards changed during the absence, a worker affected by a change in the hazards, and a worker relocated to a workplace with different hazards. A young worker is any worker under 25 years of age.

Section 3.23 requires the employer to see that, before a young or new worker begins work, the worker is given health and safety orientation and training specific to that workplace. The section lists 13 topics that must be included:

  • the supervisor's name and contact information;
  • the rights and responsibilities of employer and worker, including reporting unsafe conditions and the right to refuse unsafe work;
  • workplace health and safety rules;
  • hazards the worker may be exposed to, including risks from robbery, assault or confrontation;
  • working alone or in isolation, and violence in the workplace;
  • personal protective equipment;
  • the location of first aid facilities, how to summon first aid and how to report illnesses and injuries;
  • emergency procedures;
  • instruction and demonstration of the worker's task or work process;
  • the employer's health and safety program, if section 3.1 requires one;
  • WHMIS information, as it applies to the workplace;
  • contact information for the occupational health and safety committee or the worker health and safety representative.

Section 3.24 calls for additional orientation and training if workplace observation shows the worker cannot perform tasks safely, or if the worker asks for it. Section 3.25 requires the employer to keep records of all orientation and training given under sections 3.23 and 3.24.

WorkSafeBC training and orientation page

WorkSafeBC's page for employers calls the employer responsible for properly instructing and training workers, including safety orientation for new and young workers. Three topics must be in every orientation: rights and responsibilities, workplace hazards and safe work procedures. The Regulation text above lists more.

For task training, WorkSafeBC calls for supervised, hands-on training before the job in performing tasks, operating machines and equipment, using and maintaining personal protective equipment, and following safe work procedures. Its general procedure is an overview of each task, a slow demonstration and description, and observation of the worker on the job.

Some jobs and tasks need specific training or certification from an approved person or agency. WorkSafeBC calls follow-up the most important part of training. The employer is responsible for keeping records of each worker's education, training and supervision.

OSHA 1910.269: training and proficiency

Paragraph (a)(2) of 1910.269 covers all employees doing work under the standard, which includes line-clearance tree trimming for organizations that operate or control electric lines. Each employee must be trained in, and familiar with, the safety-related work practices, procedures and requirements of the section that apply to the job. Emergency procedures such as pole-top rescue are named. The degree of training is determined by the risk to the employee.

The training must be classroom or on-the-job and must establish proficiency in the work practices. Paragraph (a)(2)(viii) requires the employer to see that each employee has demonstrated proficiency before the employee counts as having completed the training. A note says employment records showing completed training are one way of tracking this, though the paragraph does not require them.

Another note covers employees with earlier training. The employer can confirm that training, use an examination or interview to make an initial determination that the employee understands the practices before any covered work, and supervise the employee closely until proficiency is shown.

The employer must determine, through regular supervision and inspections at least annually, that each employee follows the practices. Retraining is triggered by non-compliance found in supervision or inspection, by new technology, equipment or procedures, or by practices outside the regular job. A note treats tasks done less often than once a year as needing retraining before the work.

The section also sets first aid timing for tree work. For line-clearance tree trimming by trimmers who are not qualified employees, only one trained person need be available if all new employees are trained in first aid within 3 months of hiring.

Sources