Working alone with a chainsaw: what HSE, HSA, OSHA, California and WorkSafeBC print
HSE says to avoid working alone with a chainsaw, and Ireland's HSA says operators should not normally work alone. WorkSafeBC repealed its working-alone section for forestry in 2008, and OSHA's logging rule requires visual or audible contact.
Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.
This page reports what the official source says. It is not legal advice: ask the office named here. It covers lone work with a chainsaw as five regulators and one saw maker word it. The guide to working alone in tree work takes up the rules for tree workers in general.
Great Britain: HSE
HSE's leaflet Chainsaws at work (INDG317, revision 2) has a section on lone workers. Lone workers should not be put at more risk than other employees, and the risks are dealt with before people work alone. HSE lists three things to consider. One is a risk assessment covering areas such as violence, manual handling, medical suitability to work alone and the workplace itself. Another is any particular need for training and experience. The third is what systems might supervise and keep in touch with lone workers, where the risk assessment shows this is necessary.
On chainsaws the leaflet is direct: avoid working alone with a chainsaw. Where that is not possible, make arrangements for raising the alarm if something goes wrong. HSE lists regular contact with others by radio or telephone, someone regularly visiting the worksite, and a whistle to raise the alarm. It also lists an automatic signalling device that sends a signal at a preset time unless prevented, and checks that operators return to base or home at an agreed time. The leaflet also recommends that operators hold an emergency first-aid certificate, and that they carry a personal first-aid kit with a large wound dressing.
Ireland: HSA
The Health and Safety Authority's Irish Forestry Safety Guide 301, Using Petrol-Driven Chainsaws (published October 2018, modified for Irish use from the UK Forest Industry Safety Accord guide), states in its preparing-to-work list that operators should not normally work alone. It also lists keeping a safe working distance of at least 5 m between workers. A designated and responsible person is to know the daily work programme, with a suitable emergency procedure agreed. Where reasonably practicable the guide uses a two-way radio or mobile phone and a pre-arranged call-in system. Each person should carry a personal first-aid kit including a large wound dressing.
United States: OSHA
OSHA's logging standard, 29 CFR 1910.266, does not use the words working alone. Paragraph (d)(6)(iii) requires each employee performing a logging operation at a logging work site to work in a position or location within visual or audible contact with another employee. Paragraph (d)(6)(iv) requires the employer to account for each employee at the end of each workshift.
Paragraph (d)(7) covers signals. Hand signals or audible contact, such as whistles, horns or radios, are to be used whenever noise, distance, restricted visibility or other factors prevent clear understanding of normal voice communication between employees. Engine noise, such as from a chain saw, is not an acceptable means of signalling. Paragraph (d)(2) has the employer provide first-aid kits at each work site where trees are being cut, with the number and contents reflecting the degree of isolation, the number of employees and the hazards reasonably anticipated. How the standard reaches tree care is covered in the guide to OSHA's status for tree care.
California
California's Title 8 Safe Work Procedures section, 3427, sits in Article 12. Paragraph (a)(9) deals with height rather than the saw. A second employee shall be present to render immediate assistance when an employee works above 12 feet in any tree work operation. The paragraph counts climbing ladders, climbing into the tree and using an aerial device.
British Columbia: WorkSafeBC
Part 26 of the Occupational Health and Safety Regulation covers forestry operations. Its section 26.6, Working alone, reads Repealed, by B.C. Reg. 20/2008, effective May 1, 2008. Section 26.7(1)(b) requires highly visible outer clothing for a worker in a forestry operation when the worker's location must be routinely checked.
A saw maker's manual
One maker's instruction manual for a professional chainsaw carries a line in its safety section: do not work alone, and keep within calling distance of others who are trained in emergency procedures and can provide help in an emergency.
The differences
| Source | Chainsaw and lone work | Contact or check-in named |
|---|---|---|
| HSE INDG317 (Great Britain) | Avoid working alone with a chainsaw | Radio or telephone, visits, whistle, automatic signalling device, agreed return time |
| HSA IFSG 301 (Ireland) | Operators should not normally work alone | Two-way radio or mobile phone and a pre-arranged call-in system, where reasonably practicable |
| OSHA 1910.266 (United States, logging) | Each employee within visual or audible contact with another employee | Hand signals, whistles, horns, radios when voice does not carry. Account for each employee at end of shift |
| California 8 CCR 3427 (tree work) | A second employee present above 12 feet | None named |
| WorkSafeBC Part 26 (British Columbia) | Section 26.6 on working alone is repealed | Highly visible clothing where a worker's location must be routinely checked |
Credit: the HSE statements are adapted from HSE publication INDG317, Crown copyright, used under the Open Government Licence v3.0.
Sources
- HSE, Chainsaws at work INDG317 (rev2, published January 2013), read October 16, 2026
- Health and Safety Authority (Ireland), Irish Forestry Safety Guide 301, Using Petrol-Driven Chainsaws (October 2018), read October 16, 2026
- OSHA, 29 CFR 1910.266 Logging operations, eCFR current text, read October 16, 2026
- WorkSafeBC, Occupational Health and Safety Regulation Part 26 Forestry Operations, read October 16, 2026
- California Code of Regulations Title 8 section 3427 Safe Work Procedures, Cornell Legal Information Institute, read October 16, 2026
- STIHL, instruction manual for the MS 261 C-M chainsaw (0458-153-8321-C), read October 16, 2026