Zoning and proportionate inspection: how the National Tree Safety Group sets zones
The National Tree Safety Group defines zoning as marking land around trees by level of occupancy, so inspection effort goes where people are. Two zones, high and low use, may be enough. Councils in its case studies use two or three.
Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.
The text below describes what the named codes and training bodies publish. It is not training and does not teach the work. It covers the second edition of Common sense risk management of trees, published in 2024 by Forest Research and the Arboricultural Association for the National Tree Safety Group, in its full guidance and its summary. This material is reused from the National Tree Safety Group guidance, Crown copyright 2024, under the Open Government Licence v3.0. The group describes itself as formed in response to concern about unnecessary removal of trees from UK streets, parks and landscapes. How a risk assessment is built is set out in the guide to how risk assessment works.
Definition and purpose
The guidance defines zoning as a means of defining areas of land around trees according to levels of occupancy. The summary calls it a practice where landowners and managers define areas by level of use. It puts resources where risk is likely to be highest, which the summary links to cost-effective inspection and a defendable position after an accident.
The reasoning starts from targets. A person or property that could foreseeably be harmed by a falling tree is a target, and the number and type of targets within the falling range set the risk. A large tree can carry more risk than a small one in a high-use zone. In a rarely used or inaccessible area it may represent a low or even negligible risk, whatever its defects.
Zones by level of use
| Zone | How the guidance describes it |
|---|---|
| High use | Frequented by many people every day, such as busy roads, railways and other well-used routes, car parks, children's playgrounds, areas where people regularly congregate, or places where property may be affected |
| Intermediate use | Duty holders may designate more than two zones, with intermediate levels of use between the busiest and the quietest areas |
| Low use | Used infrequently and may need only irregular inspection, if any. In the lowest-use areas, occupation may be so low that visiting and checking trees is deemed unnecessary |
The summary says two zones, high and low use, may be sufficient, and that a broad assessment of use is all the classification needs. It adds that using three or more zones may require justification according to the standard set if an accident happens. The full guidance observes that each extra zone adds complexity to the tree risk management system, and that whichever zoning system is adopted should be applied consistently. It calls zoning particularly useful when a new risk-management regime is being started after a long period of little or no management.
The summary says the best person for the first zoning assessment is normally someone who knows the land, how it is used and what trees are present, typically the landowner, occupier or land manager. It states that zoning does not need a tree specialist. A reasonable outcome of zoning may be a decision that no areas need inspection.
Checks, inspection and proportion
The full guidance separates a check from an inspection. It adopts the HSE's term "check" for a quick visual look for obvious signs that a tree is likely to be unstable, done informally or on a schedule. An inspection is a formal procedure. The summary quotes the HSE Sector Information Minute on management of the risk from falling trees (2007, revised 2013): for trees in a frequently visited zone, a system for periodic, proactive checks is appropriate. The guidance says telling checks from inspection helps avoid a disproportionate response to risk. It also states that a competent person needs a working knowledge of trees and their defects but need not be an arboriculture specialist.
After storms, areas in high-use zones where trees are liable to breakage may be marked for closer attention. The guidance says zoning needs to be assessed again when new paths, roads or housing appear near trees, and that check frequency should be reviewed as public use rises or falls.
Zones in the local authority case studies
The full guidance closes with scenarios drawn from different landholders. Two councils show zoning at work.
- A district or borough council categorises land as high, medium or low occupancy by people or property value within striking distance of trees. Its tree officers schedule walk-over checks of high-occupancy zones on a three-yearly cycle and medium-occupancy zones every five years. Low-occupancy zones are managed reactively. Valuable trees in high-occupancy zones with fast-changing features, including ash with advanced dieback, get annual checks.
- A county council zones by land type, level of use and closeness to population centres. Its urban highway trees use high and low occupancy. Its rural highway trees use high, medium and low, based on road classification. Individual trees seen as a significant hazard get a more detailed inspection, and in some remote areas no formal checks are made.
Sources
- National Tree Safety Group, Common sense risk management of trees, full guidance, second edition 2024 (sections 6.4.3, 6.5 and the case-study scenarios), read October 16, 2026
- National Tree Safety Group, Common sense risk management of trees: Summary, second edition 2024 (section 7, Zoning), read October 16, 2026
- National Tree Safety Group, home page and guidance downloads, read October 16, 2026