Brush cutters and grass trimmers: ISO 11806 scope, test codes and OSHA's brush saw rule
ISO 11806 covers hand-held brush-cutters and grass-trimmers with an engine, in two parts, and both 2011 editions were withdrawn in April 2022. OSHA 1910.269(r)(6) keeps everyone but the operator 3.05 m from a brush saw's cutting head.
Checked against the sources at the bottom of this page on October 21, 2026. Rules, fees and pay change: the source has the last word.
This page reports what the official source says. It is not legal advice: ask the office named here. The standards are described from the catalogue entries of the Estonian standards body (EVS), which print each scope and edition history. The operator rule is 29 CFR 1910.269 in the Code of Federal Regulations.
The two parts of ISO 11806
ISO 11806 gives safety requirements and ways to verify them for the design and construction of portable, hand-held, powered brush-cutters and grass-trimmers. It covers methods for removing or reducing hazards and the information on safe working practices that the manufacturer provides. It applies to machines made after its publication date.
| Part | Machines covered | Status of the 2011 edition |
|---|---|---|
| 11806-1 | Machines with an integral combustion engine as the power unit and mechanical power transmission to the cutting attachment | Withdrawn from April 18, 2022; the EVS history lists EVS-EN ISO 11806-1:2022 as its successor |
| 11806-2 | Machines with a back-pack-mounted combustion engine and mechanical power transmission to the cutting attachment | Withdrawn from April 1, 2022; the EVS history lists EVS-EN ISO 11806-2:2022 as its successor |
The EVS history for part 1 also lists an earlier edition, EVS-EN ISO 11806:2008, dated January 9, 2009. Both 2011 editions are dated January 4, 2012 in the EVS history.
Part 1 does not apply to machines with metallic cutting attachments made of more than one piece, such as pivoting chains or flail blades. Part 2 repeats that exclusion and is read together with the relevant clauses of part 1.
Part 2 leaves out one hazard. It deals with all significant hazards except whole-body vibration from the back-pack power unit. Its note says a standardized test procedure for measuring that vibration was not available.
Noise and vibration test codes
Two further ISO documents cover brush-cutters alongside saws. Both name chain-saws, brush-cutters, grass-trimmers, edgers and pole-mounted powered pruners, and both are listed against the Machinery Directive 2006/42/EC.
| Standard | What it determines | Editions listed by EVS |
|---|---|---|
| ISO 22868:2021 | Noise emission: the A-weighted emission sound pressure level at the operator position and the A-weighted sound power level (engineering method, grade 2 accuracy) | 2011, dated April 5, 2011; 2021, valid from April 15, 2021 |
| ISO 22867:2021 | Vibration at the handles under standardized conditions | 2011, dated January 4, 2012; 2021, valid from December 31, 2021 |
The Health and Safety Executive prints separate typical vibration levels for the two head types. A brushcutter with a saw head is given 3 to 5 m/s2, with 5 recommended as the initial value. A strimmer head is given 2 to 7 m/s2, with 7 as the initial value.
OSHA rules for backpack power units
Paragraph (r) of 29 CFR 1910.269 sets additional requirements for line-clearance tree trimming. The standard defines that as work within 3.05 m (10 ft) of electric supply lines and equipment at 50 kilovolts or less to ground, with a larger distance above 50 kilovolts. Subparagraph (r)(6) covers backpack power units for pruning and clearing.
- While a backpack power unit is running, no one other than the operator may be within 3.05 m (10 ft) of the cutting head of a brush saw.
- A backpack power unit must be equipped with a quick shutoff switch readily accessible to the operator.
- Backpack power unit engines must be stopped for all cleaning, refuelling, adjustments and repairs to the saw or motor, except as the manufacturer's servicing procedures require otherwise.
Sources
- EVS, EVS-EN ISO 11806-1:2011 catalogue entry (scope, status, edition history), read October 21, 2026
- EVS, EVS-EN ISO 11806-2:2011 catalogue entry (scope, status, edition history), read October 21, 2026
- EVS, EVS-EN ISO 22868:2021 catalogue entry (noise test code), read October 21, 2026
- EVS, EVS-EN ISO 22867:2021 catalogue entry (vibration test code), read October 21, 2026
- Health and Safety Executive, Hand-arm vibration: assess the risks, Table 1, read October 21, 2026
- eCFR, 29 CFR 1910.269, paragraph (r)(6) and the definition of line-clearance tree trimming, read October 21, 2026