ArbNation Join free

What a BS 5837 tree survey records: the data fields councils ask for

Bassetlaw, Leeds, Barrow and a GOV.UK-hosted survey note between them list these fields: species, stem diameter, height, crown spread, age class, condition, category and root protection area. Leeds and Barrow set the size and distance triggers.

Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.

A tree survey under BS 5837:2012 is a schedule with one line for each tree, group or hedge. Councils list the columns they want in their validation guidance. The fields below come from Bassetlaw District Council, Leeds City Council and Barrow Borough Council, and from the explanatory notes to a tree survey published on GOV.UK in June 2024. Bassetlaw, Barrow and the GOV.UK notes all put the survey in the hands of a qualified arboriculturist, and Barrow says an applicant cannot do a full survey alone.

The schedule columns

Survey fields and who lists them
FieldWhere it is listed
SpeciesBassetlaw lists species in its schedule. Leeds calls abbreviated tree names helpful on plans
Tree numberLeeds wants each surveyed tree tagged with a non-injurious, durable numbered tag at a consistent orientation and height. ID numbers carry onto the main layouts
Stem diameterBassetlaw lists trunk diameters. The GOV.UK notes give diameters at breast height. Barrow measures stem diameter at 1.5 m above ground, with other rules for sloping ground, swellings, low forks and multi-stemmed trees
HeightBassetlaw lists tree heights in metres, and its constraints plan shows current and ultimate heights. The GOV.UK notes list heights
Crown spreadBassetlaw lists branch spread in metres. The GOV.UK notes give crown spread as a radial measurement towards each cardinal point from the stem
Age classThe GOV.UK notes list age class
ConditionBassetlaw lists tree condition. The GOV.UK notes give the condition at the time of inspection, including structural and physiological condition
Defects and recommendationsBassetlaw lists tree defects. The GOV.UK notes record decay, physical defects and preliminary management recommendations
Quality categoryThe GOV.UK notes list the BS 5837 category and suitability for retention. Leeds says trees graded A to C should be considered for retention
Remaining lifeThe GOV.UK notes tie each category to an estimated remaining life: at least 40 years for A, 20 for B and 10 for C
Root protection areaBassetlaw, Leeds, Barrow and the GOV.UK notes all list it
PhotographsBassetlaw lists photographs of the trees
Tree Preservation Order treesLeeds wants TPO trees marked on the plans

The category column is covered in the guide to BS 5837 tree quality categories.

Trees, groups and hedges

The GOV.UK notes record each tree as an individual by default and treat trees as a group where they form a cohesive feature. Hedgerows and sizeable boundary hedges, including evergreen screens, go in the schedule with lateral spread, height and stem diameters, or on the Tree Constraints Plan. Shrub masses are recorded when they are a significant feature of the site. The notes point out that a BS 5837 survey does not assess hedgerows under the Hedgerow Regulations 1997 or from an ecological angle.

Leeds also requires hedges, hedgerows and shrub masses in the survey. It wants the survey drawn on a topographical survey with ground levels, covering any off-site trees that may influence the site, and accompanied by a written report.

Which trees get surveyed

The three councils use different triggers.

Survey triggers by council
CouncilTrigger
LeedsTrees with an estimated stem diameter of 75 mm or more that overhang the site, or stand beyond the boundary within 12 times their stem diameter
BarrowAny tree within 15 m of the proposed development, on the applicant's or a neighbour's land. These go on a Tree Constraints Plan first. If the plan shows building in a root protection area or canopy, a full survey by a qualified arboriculturist follows
BassetlawTrees within the application site or on adjacent land that could influence or be affected by the development, including street trees

The root protection area column

Barrow gives the calculation. For a single stem the root protection area is a circle with a radius of 12 times the stem diameter. Barrow also gives separate formulas for trees with two to five stems and for trees with more than five, and it caps the result at 707 square metres. Barrow and Leeds both plot the area first as a circle centred on the stem base. Where roads or walls show that rooting has spread unevenly, they accept a polygon of equivalent area based on an arboricultural assessment.

Barrow prints example radii from its own plans: a 27 cm stem gives a radius of 324 cm, a 53 cm stem gives 636 cm, a 75 cm stem gives 900 cm and a 125 cm stem gives 1,500 cm. The GOV.UK notes report the same multiplier of 12 and say it is applied to the stem diameter, with stems of multi-stemmed trees combined. They add that buildings and retaining walls adjust the area, and that watercourses and ponds do too because waterlogged soil is poor for roots. Bassetlaw and Barrow define the root protection area as the minimum area to leave undisturbed around a retained tree.

Sources