ArbNation Join free

Buying a used bucket truck or MEWP: what HSE, WorkSafe NZ and OSHA say about paperwork

HSE says a seller of second-hand work equipment cannot hide behind 'sold as seen', and lifting equipment should come with its last thorough-examination record. WorkSafe NZ and OSHA add their own points for buyers of lifts.

Checked against the sources at the bottom of this page on October 15, 2026. Rules, fees and pay change: the source has the last word.

This page reports what the official source says. It is not legal advice: ask the office named here. Climbing and rigging gear bought second-hand brings other questions on used gear. Three regulators speak to used bucket trucks and MEWPs, the short name for mobile elevating work platforms.

Great Britain: the seller's duty and the examination record

HSE puts a duty on anyone supplying second-hand equipment for use at work: it must be safe and without risks to health, so far as reasonably practicable, when set, used, cleaned or maintained. The duty reaches importers, distributors, suppliers and one-off sales by users. The term "sold as seen" cannot be used to avoid it.

The seller provides adequate information on use, normally a copy of the original instructions in English. Where periodic inspection or thorough examination is required, as for lifting equipment, copies of the last record of inspection or thorough examination should also be provided. Equipment placed on the market under product legislation should be supplied with its safety features present and working, such as guards and other safety devices.

HSE's page on thorough examinations puts equipment used to lift people on a 6-month interval under the Lifting Operations and Lifting Equipment Regulations 1998 (LOLER), unless an examination scheme sets another. The written report carries the examination date, the date the next one is due, and any defect that is or could become a danger. Examination records are to be available when lifting equipment leaves the business, including under hire or second-hand sale. A first-use examination is needed unless the equipment has a Declaration of Conformity less than a year old and was not assembled on site.

SituationWhat HSE says
Equipment older than product legislationIt should be supplied in a safe condition, which may need additions. HSE points to PD 5304 for machinery from before 1995
Grey import, not yet placed on the UK marketThe person first placing it on the market takes on the conformity assessment: technical file, Declaration of Conformity and conformity marking
Sold for scrap or spares, or dealer to dealerExcepted from the safety duty, and HSE recommends the sale documents say so
Written waiver by the purchaserMay relieve the seller to the extent that is reasonable, and cannot be used for equipment in scope of product supply legislation
AuctionSeller and auctioneer share the duty, and auctioning does not free the seller from it

New Zealand: Safe use of machinery, section 11

WorkSafe New Zealand's good practice guide exempts second-hand plant sold "as is" from the duties of suppliers. A business buying it still has a duty to keep the plant from creating risks for its workers. The guide lists what a buyer should do. The machine suits the job, and its history and previous use are checked so it is not at the end of its life. Specifications, use and maintenance information come from the seller or manufacturer. The place of use and the guarding get a look, and a certified engineer may check the machine.

For machinery from overseas with a CE marking, the benchmark in New Zealand is AS/NZS 4024. A CE mark does not mean a machine automatically meets New Zealand law. To be certain, the guide recommends a check by a competent person such as a Chartered Professional Engineer.

United States: 29 CFR 1910.67 points that bear on a used lift

  • Aerial lifts acquired on or after July 1, 1975 follow the design and construction rules of ANSI A92.2-1969.
  • Lifts acquired before that date that did not meet A92.2-1969 could not be used after July 1, 1976 unless modified to conform.
  • A lift may be field modified for other uses only if the manufacturer or an equivalent entity, such as a nationally recognized testing laboratory, certifies the change in writing.
  • Electrical tests follow A92.2-1969 section 5. Equivalent DC voltage tests approved by the equipment manufacturer or equivalent entity may replace the AC test.

Sources