ArbNation Join free

Faller certification in British Columbia: the BC Faller Training Standard and Part 26

British Columbia bars a worker from falling trees in a forestry operation without faller training and written certification. Sections 26.21 and 26.22 set a 30-day minimum for basic training and a 180-day supervised period.

Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.

This page reports what the official source says. It is not legal advice: ask the office named here. The office is WorkSafeBC for the rules and the BC Forest Safety Council for faller certification.

This page draws on WorkSafeBC and the BC Forest Safety Council. It is not training and does not teach the work.

Section 26.21: faller qualifications

Sections 26.21 to 26.29 of the OHS Regulation apply only to manual falling and bucking. Section 26.21 bars a worker from falling trees, or from bucking associated with falling, unless two things hold. The worker is qualified to a standard acceptable to the Board, and the work is within the worker's documented and demonstrated capabilities.

The first condition does not apply to a worker in a falling or bucking training program acceptable to the Board. Both sections were enacted by B.C. Reg. 20/2008, effective May 1, 2008.

Section 26.22: forestry operation faller training

Section 26.22 bars a worker from working as a faller in a forestry operation unless the worker has received training acceptable to the Board and is certified in writing as a competent faller. WorkSafeBC's guideline quotes section 26.1 on the term. A forestry operation is a workplace where work is done in relation to silviculture or harvesting trees. That includes building access and transporting the harvested trees to a facility where they are processed or from which they are exported.

The training must include three parts:

  1. Basic training in falling trees, working one-on-one with a qualified faller or trainer for not less than 30 days.
  2. A written or oral examination on falling, taken in the presence of a qualified supervisor or trainer.
  3. Work as a trainee faller under close supervision of a qualified faller or trainer, for 180 days or a shorter period set by a qualified supervisor or trainer who is satisfied the worker is competent.

The supervisor of a trainee faller evaluates the trainee's work weekly, keeps records of every evaluation and verifies in writing that the trainee has shown the competence needed for certification. A person acceptable to the Board may then certify in writing that the worker is a competent faller. The training record must be kept in a form acceptable to the Board, and a copy is available to an officer or to the trainee.

Section 26.22(7) sets a challenge route that skips the three training parts. The worker must have performed falling duties regularly for at least 2 years before the evaluation. A qualified supervisor or trainer must evaluate the falling to a standard acceptable to the Board. The worker must pass a written or oral examination in that person's presence, and a person acceptable to the Board must certify the worker in writing.

Section 26.22.1 requires a qualified supervisor to be designated for all falling and associated bucking in a forestry operation. The supervisor inspects each faller's workplace at intervals appropriate to the risks and keeps a record of every inspection.

The BC Faller Training Standard

WorkSafeBC developed the BC Faller Training Standard with forest industry employer associations, labour representatives and experienced hand fallers. The guideline lists three administrators: the BC Forest Safety Council, the Canadian Association of Geophysical Contractors and the BC Wildfire Service. The Council is approved by WorkSafeBC to administer the Standard and to train and certify fallers to it.

The Standard has two parts. The first is new faller training, covering protective equipment, the maintenance and operation of falling equipment and tools, hazard recognition and control, and falling, bucking and limbing procedures. The second is a written exam and a practical field evaluation, and passing both leads to a certificate. WorkSafeBC reviews other courses against the Standard and adds accepted ones to its guideline.

Certification paths on the Council's page

PathWhat the Council lists
New faller traineesThe 30-day New Faller Training Program under section 26.22. Up to 180 days of on-the-job training under a Qualified Supervisor or Faller. At least 20 Faller Trainee Weekly Training and Progress Reports from the 2 years before applying, with the five most recent meeting the Standard. A written supervisor recommendation that the trainee is ready for assessment. An application to the Council, with an additional fee
Fallers from outside BCVerifiable training records from a training agency. Evidence of 2 years of regular production falling in the last 2 years, at least 180 days, which is 90 days a year, citing Guideline G26.22(7)

The Council issues faller certification cards every three years to certified fallers in good standing. Cards were issued annually until January 2020. Annual faller fees were charged from 2008 through 2013, and the Council no longer charges or collects outstanding ones.

The regulation sets the supervised period at 180 days or a shorter period. The Council's page says up to 180 days.

Employers and arborists in the guidelines

Guideline G26.21/26.22 requires employers to verify that fallers have WorkSafeBC approved training. A valid faller training certificate or an enquiry to the Council does this. Faller experience is documented in the log book issued to each faller. An employer who finds a faller not capable of falling the timber at the workplace must refuse to permit it or provide the training that allows it.

Section 26.21 is not limited to forestry operations. The guideline lists arborist technicians and utility arborists in forestry settings, parks workers, firefighters falling in emergencies and land clearing where timber is felled but not harvested.

For arborist technicians and utility arborists, Guideline G26.21-1 sets two components. The first is the SkilledTradesBC approved training program, including its falling and bucking modules. The second is an assessment by a qualified supervisor trainer, arranged through HortEducation.ca. WorkSafeBC says this certification allows falling and bucking within the scope of arborist work only, and does not count as faller certification for a forestry operation under section 26.22.

Gaps in the sources

These sources cover British Columbia only. No Alberta or Ontario faller training standard was found in an opened source, so neither province is described.

Sources