Chainsaw noise at work: HSE's 80 and 85 dB(A) levels and OSHA's 85 dBA action level
Great Britain sets 80 dB(A) for risk assessment and 85 dB(A) for hearing protection zones, with a limit of 87 dB(A). OSHA starts its hearing conservation program at an 8-hour average of 85 dBA.
Checked against the sources at the bottom of this page on October 19, 2026. Rules, fees and pay change: the source has the last word.
This page reports what the official source says. It is not legal advice: ask the office named here. The British figures come from the HSE page on the Control of Noise at Work Regulations 2005 and the HSE leaflet INDG317, Chainsaws at work. The American figures come from the OSHA occupational noise standard, 29 CFR 1910.95.
The levels at a glance
| Regime | Level | What attaches to it |
|---|---|---|
| Great Britain, 2005 Regulations | 80 dB(A) | Employers must assess the risk to workers' health and provide information and training |
| Great Britain, 2005 Regulations | 85 dB(A), daily or weekly average | Employers must provide hearing protection and hearing protection zones |
| Great Britain, 2005 Regulations | 87 dB(A), with hearing protection taken into account | Exposure limit value above which workers must not be exposed |
| United States, 29 CFR 1910.95 | 8-hour TWA of 85 dBA | Hearing conservation program. This is the action level |
| United States, 29 CFR 1910.95 | 8 hours at 90 dBA | Table G-16 permissible exposure. Controls come first, then protection |
The British regulations
The Control of Noise at Work Regulations 2005 came into force for all industry sectors in Great Britain on April 6, 2006, except music and entertainment, where the date was April 6, 2008. They replaced the Noise at Work Regulations 1989.
HSE gives the 2005 levels as 80 dB(A) for assessing the risk and 85 dB(A), a daily or weekly average exposure, for hearing protection and hearing protection zones. The exposure limit value is 87 dB(A), taking account of any reduction in exposure provided by hearing protection.
The 2005 Regulations require action at levels 5 dB(A) lower than the 1989 Regulations. They also require health surveillance, meaning hearing checks, for workers regularly exposed above 85 dB(A). The rules do not apply to members of the public exposed to noise from their non-work activities.
The HSE chainsaw leaflet
INDG317(rev2) of January 2013 says chainsaws expose operators to high levels of noise and hand-arm vibration, which can lead to hearing loss. It lists management measures: buying low-noise and low-vibration saws, providing suitable hearing protection, maintenance schedules for saws and PPE, and information and training on the health risks.
The leaflet adds that employers are required to carry out health surveillance where they cannot reduce noise or hand-arm vibration exposure to safe levels. Its PPE table lists hearing protection to EN 352-1, and the diagram of a rear-handled saw shows the hand, eye and ear defender symbols. The leaflet prints no decibel figure for a chainsaw.
The OSHA standard
Paragraph (a) of 29 CFR 1910.95 provides protection when sound levels exceed Table G-16, measured on the A scale at slow response. The table runs from 90 dBA for 8 hours, through 95 dBA for 4 hours and 100 dBA for 2 hours, to 115 dBA for a quarter hour or less. Impulsive or impact noise should not exceed 140 dB peak sound pressure level.
Paragraph (b)(1) calls for feasible administrative or engineering controls first. If those fail to bring sound levels within the table, personal protective equipment is provided and used.
Paragraph (c) starts the hearing conservation program whenever exposures equal or exceed an 8-hour TWA of 85 decibels, or a dose of fifty percent. Paragraph (c)(2) names that level the action level.
The program brings monitoring, notification of results, audiometric testing and annual training. Paragraph (i)(1) makes hearing protectors available to employees at an 8-hour TWA of 85 decibels or greater at no cost to them. Paragraph (j)(2) has protectors attenuate exposure at least to an 8-hour TWA of 90 decibels.
Where the two regimes differ
The levels sit in different places. Great Britain has a first step at 80 dB(A) and a protection step at 85 dB(A). OSHA has one action level at 85 dBA and a permissible exposure of 90 dBA for 8 hours. HSE states its 85 dB(A) level as a daily or weekly average, and OSHA states its action level as an 8-hour average. The hearing page on this site is the guide to eye, face and hearing protection.