Chainsaw ticket ladders for felling by country: small, medium and large trees
City and Guilds NPTC splits UK felling awards by tree size, with small trees up to 380 mm and large trees over 760 mm. The British Columbia, New South Wales and New Zealand texts word faller training without size tiers.
Checked against the sources at the bottom of this page on October 18, 2026. Rules, fees and pay change: the source has the last word.
This page reports what the official source says. It is not legal advice: ask the office named here. The facts on this page come from the named regulators and awarding bodies. It is not training and does not teach the work.
United Kingdom
| Body and award | What is published |
|---|---|
| City and Guilds NPTC 0039-21 | Level 2 Certificate of Competence in Felling Small Trees up to 380mm. The scheme page describes it as about directional felling with a chainsaw, in coniferous and broadleaved trees, upright or weighted towards or against the felling direction. |
| City and Guilds NPTC 0039-33 | Level 3 Certificate of Competence in Felling and Processing Medium Trees over 380mm and up to 760mm. The scheme page says it is for individuals who operate and carry out felling and processing of medium size trees as part of their work in arboriculture, forestry or other industries. It has its own page: the medium trees award. |
| City and Guilds NPTC 0039-34 | Level 3 Certificate of Competence in Felling and Processing Large Trees over 760mm. The scheme page says it is for people who operate and carry out felling and processing of large trees as part of their work in arboriculture, forestry or other industries. |
| HSE | HSE's chainsaw page says anyone who uses a chainsaw at work should have received adequate training and be competent for the type of work. It names no award or size band. It warns that people holding only CS 30/31 with little additional experience can quickly meet situations beyond their skill base, particularly larger and awkward fells and garden arboriculture. |
The small and large awards each have a page: the small trees award and the large trees award. HSE gives no 380 mm or 760 mm line. Those figures come from the awards' own titles.
British Columbia
WorkSafeBC's OHS Regulation Part 26 covers manual falling and bucking in sections 26.21 to 26.29. Section 26.21 bars a worker from falling trees unless qualified to a standard acceptable to the Board and working within documented and demonstrated capabilities. A worker in a falling training program acceptable to the Board is excepted.
Section 26.22 covers forestry operations. A faller needs training acceptable to the Board and written certification as a competent faller. The training includes basic falling work one-on-one with a qualified faller or trainer for not less than 30 days, then a written or oral examination. A trainee faller then works under close supervision for 180 days, or a shorter period if the supervisor or trainer is satisfied of competence. The supervisor evaluates the trainee weekly and keeps records. A worker with at least two years of regular falling duties can be certified through an evaluation and examination instead. Sections 26.21 and 26.22 set no tree-size tiers.
New South Wales
SafeWork NSW's Tree work Code of Practice sets its training duty in section 1.4. Persons conducting a business or undertaking must provide information, training, instruction and supervision necessary to protect all persons. The code says the information, training and instruction must be suitable and adequate for the works, and readily understandable to the person receiving it so far as is reasonably practicable. It adds that training should be given by a competent person and should be practical and hands-on. Section 6.1 says the person operating a crane that requires a high risk work licence must hold a valid one. It names no felling certificate and no tree-size tiers.
Chapter 9 of the code does tie technique to space: clear felling is usually used where there is a minimum of two tree lengths of open space, and controlled directional felling where there is less. It states that tree felling should only be performed by an appropriately skilled and experienced person or under the supervision of a competent person.
New Zealand
The WorkSafe NZ Approved Code of Practice for Safety and Health in Arboriculture says all arborists engaged in arboricultural work shall be suitably qualified, and competency outcomes shall be documented, including any national qualifications. Workers holding a valid and approved training qualification are considered experienced in those skills. Its list of areas where workers should be trained and competent includes rigging and rigging equipment, and mechanical theory such as the use of winches. An employer who hires an inexperienced worker shall provide the instruction or training required and "ensure close supervision" until the worker shows competence.
The code defines a competent person as someone who can consistently demonstrate the skill and knowledge from experience or training for the work. It defines a trainee arborist as an employee or student not yet competent who is supervised by a competent person. It defines tree felling as the execution and placement of felling cuts to bring a standing tree safely to the ground. Its felling section requires scarf cuts on trees and trunks over 125 mm diameter at breast height.
Sources
- City and Guilds NPTC, 0039-21 Level 2 Certificate of Competence in Felling Small Trees up to 380mm, scheme page, read October 16, 2026
- City and Guilds NPTC, 0039-34 Level 3 Certificate of Competence in Felling and Processing Large Trees over 760mm, scheme page, read October 16, 2026
- City and Guilds NPTC, 0039-33 Level 3 Certificate of Competence in Felling and Processing Medium Trees over 380mm and up to 760mm, scheme page, read October 18, 2026
- HSE, Chainsaws and tree felling (chainsaw operator page), read October 16, 2026
- WorkSafeBC, OHS Regulation Part 26 Forestry Operations, sections 26.20.1 to 26.22, read October 16, 2026
- SafeWork NSW, Tree work Code of Practice, sections 1.4, 6.1 and chapter 9, read October 16, 2026
- WorkSafe New Zealand, Approved Code of Practice for Safety and Health in Arboriculture, read October 16, 2026