ArbNation Join free

Chainsaw training units in Australia: FWPCOT2238, FWPCOT2239 and FWPCOT2273

Three national units cover hand-held chainsaw work: FWPCOT2238 for cutting materials, and FWPCOT2239 and FWPCOT2273 for trimming and cutting felled trees. The codes start FWP, not AHC, and each unit says what licensing applies.

Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.

This page reports what the official source says. It is not legal advice: ask the office named here. The named codes and training bodies are described here as published. It is not training and does not teach the work.

The units are published on training.gov.au, the Australian national register of training components, as unit of competency documents. They sit in the Forest and Wood Products (FWP) Training Package.

FWPCOT2238 Cut materials with a hand-held chainsaw

Release 1 of this unit is dated February 3, 2023 and replaces FPICOT2238A, which came with the FPI11 Forest and Forest Products Training Package Version 1. It is the first release in the new standards format. The unit describes the outcomes required to prepare and cut materials with a hand-held chainsaw, and it includes basic operator maintenance checks. Fuller servicing and maintenance procedures are in FWPCOT2237 Maintain chainsaws.

The unit applies to people who cut materials with a hand-held chainsaw in a construction, saw mill, forest products factory, timber retail yard or horticultural setting. Its sectors are Sawmilling and Processing, and Timber Merchandising. There is no pre-requisite unit.

The unit states that no licensing, legislative, regulatory or certification requirements apply to it at the time of publication. It has three elements: prepare for operation, cut material, and conduct chainsaw maintenance. The copyright is held by the Commonwealth of Australia, 2023, with Skills Impact named as the body.

FWPCOT2239 Trim and cut felled trees

Release 2 is dated June 28, 2021 and came with Forest and Wood Products Training Package Version 3.0. Release 1 came with Version 2.0. The change between them is minor typographical corrections, and the two are mapped as equivalent.

The unit describes the outcomes required to trim and cut felled trees with a chainsaw and to complete operator maintenance. It applies where timber production is not the main focus. The workers it names are forestry workers, chainsaw operators, forest harvesters, harvesting technicians and arboriculture workers. The sector is Common Technical, and there is no pre-requisite unit.

On licensing, the unit says that licensing, legislative, regulatory or certification requirements apply to it in some states and territories at the time of publication, and may differ according to jurisdiction. Its five elements are preparing for trimming and cutting, visually assessing felled trees, planning cutting, using the chainsaw to trim and cut trees, and completing equipment maintenance.

FWPCOT2273 Trim and cut felled trees

Release 1 is dated February 11, 2025 and came with Forest and Wood Products Training Package Version 8.0. Its previous version is FWPCOT2256, mapped as equivalent, with information added to the Application and changes to the volume and frequency of the Performance Evidence.

The unit defines a felled tree as any tree or part of one that has fallen or been felled and lies on the ground. That includes a trunk, branch or limb. The setting can be bushland, a plantation, a forest, parkland, a roadway or an urban area. It applies to people who trim and cut felled trees as part of arboriculture, forestry, agriculture, conservation and land management, local government, emergency services and other government agency operations. With the exception of minor forest produce, it does not apply to commercial harvesting operations.

The unit says all work must be carried out to comply with workplace procedures, according to state or territory health and safety regulations, legislation, standards and industry codes of practice. It also says that no licensing, legislative or certification requirements apply to the unit at the time of publication. The five elements match FWPCOT2239 in outline. Performance criterion 4.5 adds retrieval techniques for a stuck, pinched or jammed part of a chainsaw.

Where the three units differ

FWP chainsaw units compared
UnitRelease and dateLicensing statement in the unit
FWPCOT2238 Cut materials with a hand-held chainsawRelease 1, February 3, 2023No licensing, legislative, regulatory or certification requirements apply at the time of publication.
FWPCOT2239 Trim and cut felled treesRelease 2, June 28, 2021Requirements apply in some states and territories and may differ according to jurisdiction.
FWPCOT2273 Trim and cut felled treesRelease 1, February 11, 2025No licensing, legislative or certification requirements apply at the time of publication.

Chainsaw tickets elsewhere have their own guide, and so do operator units for machines.

Sources