Chest harnesses and chest ascender set-ups for single rope technique: what EN 813/EN 361 and makers say
No code or catalogue entry in the record describes a chest harness or a chest ascender as a type. What exists is the standards for sit and full-body harnesses, the ICoP's rules for ascending devices and a maker's summary of EN 12841.
Checked against the sources at the bottom of this page on October 21, 2026. Rules, fees and pay change: the source has the last word.
This page reports what the official source says. It is not legal advice: ask the office named here. It sets out the harness and ascender standards that sit around stationary rope technique, called SRT in the ICoP. Chest-worn parts are not named as a type in any of them.
SRT in the ICoP
The Industry Code of Practice for Arboriculture: Tree Work at Height (ICoP, Edition 2, May 2020) defines stationary rope technique. The rope stays stationary in relation to the user and harness while the system is in use. It is secured to one anchor or several. The operator connects to it through one or more friction-based elements and can ascend, move around the tree and descend while the rope stays still at the anchor.
The code defines an ascender as a mechanical device for ascending a rope that slides when advanced up the rope but grips when loaded in the opposite direction.
Harness standards
| Standard | What the entry records |
|---|---|
| EN 361, Personal protective equipment against falls from a height. Full body harnesses | The Swedish standards institute lists SS-EN 361, edition 2, approved in 2002, as valid. Its scope covers requirements, test methods, marking, manufacturer information and packaging for full body harnesses. Other body supports, such as those in EN 358, EN 813 or EN 1497, may be incorporated into a full body harness. Fall arrest systems are in EN 363. |
| EN 813, Personal fall protection equipment. Sit harnesses | The BSI record is draft 21/30440765 DC of BS EN 813, dated September 23, 2021. It lists the subjects as adjusting devices, marking, instructions for use, performance testing and strength of materials. |
| UIAA 105 Harnesses | Listed in the UIAA safety standards list, alongside UIAA 126 Rope Clamps. |
| EN 12277, Mountaineering equipment. Harnesses | Named in the ICoP's Part 6 list of work equipment standards, with EN 361, EN 813 and EN 12841. |
ICoP rules for harnesses and ascending devices
ICoP clause 3.10.6.9 says a harness must allow a full range of movement while giving the connection points a personal fall protection system needs. It must have a means of adjustment and give adequate, comfortable support. Its closures and adjusters must not open or loosen under load. It must allow components to be replaced, subject to authorisation from the manufacturer.
Clause 3.10.6.3 lists three duties for ascending devices. Compatibility with the ropes used, in diameter and type, comes first. Easy adjustment when moving up and down the working or backup line is next, and effective grip on the line is last.
Clause 3.10.6.4 treats a backup device as protection against catastrophic failure of the primary system, its components or its anchors. A backup device must keep any fall distance as short as possible, must not disconnect from the line by accident and must suit the rope type and diameter.
EN 12841 types in a maker's summary
A rope-access equipment maker's simplified summary of EN 12841:2006 sorts rope adjustment devices into three types. Type A is a device for the safety line that reflects the user's changes of position and locks to the line when a static or dynamic load is applied. For working lines, type B is an ascending device, manually operated, that locks under load in one direction and slides freely in the other. The last, type C, is a manually operated, friction-based descending device. The maker states that the summary does not hold the full details of the standard.
Gaps in the sources
The BSI 813 page is a catalogue record of a draft and carries no scope text. No maker instruction for a chest harness or chest ascender opened. The words chest harness and chest ascender do not appear in the ICoP.
Sources
- BSI Knowledge, 21/30440765 DC Draft BS EN 813 Sit harnesses, read October 21, 2026
- Swedish Institute for Standards, SS-EN 361 Full body harnesses, read October 21, 2026
- Arboricultural Association, Industry Code of Practice for Arboriculture: Tree Work at Height, Edition 2, May 2020, read October 21, 2026
- UIAA, Safety Standards list, read October 21, 2026
- Edelrid, Summary of EN 12841 rope adjustment devices, read October 21, 2026