ArbNation Join free

Dead, decayed and hazard trees before a climb: the wording in five sources

The NSW, New Zealand, British Columbia and UK documents each name dead wood, decay or structural defect as a hazard to assess before a climb. The NSW code goes furthest, with controls such as avoiding climbing above or beyond a defect.

Checked against the sources at the bottom of this page on October 19, 2026. Rules, fees and pay change: the source has the last word.

The named codes and training bodies are described here as published. It is not training and does not teach the work.

Credits: SafeWork NSW text is adapted from the Tree works code of practice (March 2026), copyright State of New South Wales (SafeWork NSW), licensed under Creative Commons Attribution 4.0; changes were made, because the text is summarised and reworded. WorkSafe New Zealand material is summarised from its Approved Code of Practice for Safety and Health in Arboriculture (November 2012), with the source acknowledged.

Wording by source

SourceDead, decayed and hazard trees
SafeWork NSW code, 3.1 (Australia)Tree defects such as deadwood, decay, bark inclusions, cavities, termite or borer infestation, stump movement and root damage affect stability and structural integrity. The code's assessment table puts it this way: dead and decayed trees are unstable. Branches that are dead may not carry the combined weight of worker and equipment. Some may hang in the tree. Decay at the base, in the trunk or in branch forks means the tree may split or collapse when climbed.
WorkSafe NZ code, 2.2 and 3.2.2 (New Zealand)Before any work or climbing, the work area is inspected for hazards, and decay or rot and dead branches are the first examples. A visual hazard assessment of the tree, including the rooted area, is performed before climbing.
WorkSafeBC Part 26, 26.12.0.2 and 26.12.0.3 (British Columbia)A qualified arborist determines that each tree to be climbed can withstand the loads of the climbing and of the ground work around it. The climbing plan identifies hazards from tree structure and from the recurring patterns of failure for the species, such as rot, root damage or stem damage.
WorkSafeBC Part 26, 26.11 (British Columbia)A dangerous tree is one that is a hazard because of its location or lean, physical damage, overhead conditions or deterioration of its limbs, stem or root system. Where work will expose a worker to one, the tree must be felled or assessed by a person with accepted training. This section is in the forestry operations part.
WorkSafeBC bulletin WS-2023-06, November 2023Arborists often face an increased risk in residential and recreational settings when the tree is in a limited work area or is in poor health, dead or decaying.
ICoP Tree Work at Height (United Kingdom), 3.4.4A tree condition assessment must be conducted before work, and it considers structural defects in the tree or adjoining trees. Among the points for choosing rope-based access, the ICoP lists that the tree is in a structurally safe condition and suitable to climb, and offers suitable anchor points.

The NSW code on defects

The NSW code sets out an order of controls for tree defect risks. First comes removing the defect where possible, for example a hanging branch or deadwood. Next is avoiding climbing above or beyond the defect, and avoiding placing climbing or rigging loads on the defective section.

Its listed ways to do that are felling or removing the section from below the defect, and working from a platform to avoid loading the tree. Another is to attach the climber independently to a separate tree or a stable part of the same tree. The climber can also strengthen the defect with roping, restraint straps, bracing or a hand operated wire winch.

The New Zealand code on dead trees

The New Zealand code calls for special care when felling dead trees, because parts may fall into the work area as the tree falls. Its felling planning list names broken branches, deadwood and overhead material that may dislodge, and decayed or weak spots through the tree. It also asks whether a tree can withstand the strain of lowering before branches are shortened or removed.

The ICoP on checking while aloft

The ICoP asks that assessment of the tree continue while it is accessed and worked on. Hazards in the crown or stem that were not visible from the ground can then be identified and controlled. Significant changes to tree condition are recorded in the site-specific risk assessment and passed to the competent person before aerial work starts. The ICoP also says climbing in the dark should only be considered if the tree has been assessed during daylight or under adequate artificial light.

Missing from the sources

None of these documents gives a decay percentage, a wall thickness or a branch diameter at which climbing is ruled out. They name the defects and the assessment, and leave the threshold to the competent person.

Sources