Counterfeit and unmarked climbing gear: Product safety register entries on unbranded harnesses and carabiners
The UK product safety register holds dozens of entries on unbranded climbing harnesses sold through online marketplaces, and one on carabiners backed by counterfeit certificates. Regulation 2016/425 sets the marking and assessment rules behind them.
Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.
This page reports what the official source says. It is not legal advice: ask the office named here. The sources are the UK Office for Product Safety and Standards (OPSS) register of product safety alerts, reports and recalls, and Regulation (EU) 2016/425 on personal protective equipment as it appears on legislation.gov.uk. No seller is named here.
The register entries
The OPSS register lists 51 entries with both "climbing" and "harness" in the title. They are dated September 29, 2023 to July 28, 2025, and 48 of them are recalls and 3 are safety reports. 47 of the titles name an online marketplace. The four titles that name no marketplace include entries for named makers, which sit in the guide to climbing gear recalls. The register's own total, across every product type, is 3,779 entries.
Two entries show the wording the others share. Both were published on June 6, 2024. Both carry the risk level serious, and both record a recall from end users with the marketplace listing removed.
| Entry | Product as described | Hazard in the entry |
|---|---|---|
| 2310-0093 | Unbranded black and red climbing harness: a half body guide belt with a front handle that ties around waist and legs. Country of origin unknown | Serious risk of injuries or falling from a height |
| 2310-0192 | Unbranded black climbing harness: a waist strap harness with a front handle and two adjustable leg straps. Country of origin unknown | Serious risk of injuries or falling from a height |
OPSS classes both as personal protective equipment. The entries give the reason in the same words: the harness was not supplied with the required compliance documentation or markings to show it was conformity assessed. They add that mandatory third-party conformity assessment by an authorised body applies to products that protect against more serious risks. Both entries record that the product does not meet Regulation (EU) 2016/425 or the Personal Protective Equipment (Enforcement) Regulations 2018.
Carabiners with counterfeit certificates
OPSS entry 2604-0075, published May 28, 2026, covers unbranded twistlok carabiners, rope pulleys and swing swivels from China. They were supplied as harness accessories for use with bungee trampoline equipment. The Health and Safety Executive notified the entry, and the supplier withdrew and recalled the products.
The entry places the products in Category III PPE. One mechanical failure of a carabiner of this type was reported: the turn lock sleeve spring failed to engage properly and let the gate open during equipment set up. The supplier could not provide a valid declaration of conformity. The EC type examination certificates it did provide were confirmed by the named notified body to be counterfeit. The original certificates were issued to a different manufacturer and expired in 2024. The notified body confirmed that it did not issue the certificates shown.
The entry urges suppliers of similar CE marked components to verify the authenticity of the conformity documents. It names two lookup lists: the EU Notified Bodies list on the Single Market Compliance Space, and the UK find-a-conformity-assessment-body service on GOV.UK.
What Regulation 2016/425 sets
Annex I of the regulation puts risks in three categories. Category III covers risks that may cause very serious consequences such as death or irreversible damage to health. The list includes falling from a height and cuts by hand-held chainsaws. Article 19 sets conformity assessment for Category III: type-examination under module B, plus either module C2 or module D for production control.
Article 17 sets the marking. The UK marking shall be affixed visibly, legibly and indelibly to the PPE. Where that is not possible or not warranted, it goes on the packaging and on the accompanying documents. Annex II sets the health and safety requirements for PPE, with a section on prevention of falls from a height.
Basis of the findings
The two harness entries give no breaking figure. Their hazard finding rests on missing documents and markings. Entry 2604-0075 is the one of the three with a reported failure of an item.
To correct or remove an entry, write to the address at the foot of this page.
Sources
- UK Office for Product Safety and Standards, Product Recall: Black and Red Climbing Harness sold via an online marketplace (2310-0093), published June 6, 2024, read October 16, 2026
- UK Office for Product Safety and Standards, Product Recall: Black Climbing Harness sold via an online marketplace (2310-0192), published June 6, 2024, read October 16, 2026
- UK Office for Product Safety and Standards, Product Recall: Unbranded Twistlok Carabiners, Rope Pulleys and Swing Swivels (2604-0075), published May 28, 2026, read October 16, 2026
- GOV.UK, Product Safety Alerts, Reports and Recalls, register listing and title search, read October 16, 2026
- legislation.gov.uk, Regulation (EU) 2016/425 on personal protective equipment, as amended for the UK, read October 16, 2026