ArbNation Join free

EN 13525 and EN 13683: which standard covers which chipper and shredder, and what falls outside

EN 13525 covers manually fed wood chippers for forestry and landscaping. EN 13683 covers small hand-fed garden shredders with their own engine, with feed openings that fit a 250 mm square.

Checked against the sources at the bottom of this page on October 15, 2026. Rules, fees and pay change: the source has the last word.

This page reports what the official source says. It is not legal advice: ask the office named here. BSI, the British standards body, lists both standards with their scope.

EN 13525: wood chippers

BS EN 13525:2020 is titled Forestry machinery, Wood chippers, Safety. BSI gives its scope as safety requirements, and their verification, for the design and construction of self-propelled, mounted, semi-mounted and trailed wood chippers used in forestry, agriculture, horticulture and landscaping.

It applies to chippers used when stationary, loaded by hand through a horizontal or near horizontal infeed chute. The infeed action comes from the chipping components themselves, or from rollers or conveyors that are part of the chute.

The standard does not cover these items.

  • Road rules for transport between work sites.
  • Hazards from any self-propelled function.
  • Hazards from transmitting power from an external source, such as power take-off drive shafts.
  • Machines with an extension table or conveyor that protrudes beyond the lower edge of the infeed chute and its lower protective device.
  • Hazards from pull-starting the engine of an integral power source.
  • Mechanical loading, vertical infeed chute chippers, and machines loaded only mechanically.
  • Mechanical discharge systems for chips that are not part of the chipping mechanism, such as conveyors.
  • Electromagnetic aspects, and environmental hazards other than noise.

For a machine that can be loaded both by hand and mechanically, the standard covers only the manual loading. The noise test code in the standard does not comply with the outdoor noise directive 2000/14/EC.

EN 13683: shredders and chippers with their own power

BS EN 13683:2003+A2:2011 is titled Garden equipment, Integrally powered shredders/chippers, Safety. It covers hand-fed shredders and chippers with an integral power source, with or without vacuum-assisted collection. It applies only to units designed for outdoor use in a stationary position by an operator standing on the ground.

The size limit is in the feed openings. They may take any shape that meets the standard's safety distances, as long as together they fit into a square of 250 mm by 250 mm at the plane of the opening.

Left out of EN 13683
Units driven by an external power source
Mobile use of units that can run in both stationary and mobile modes
Units with powered discharge meant to broadcast material or load vehicles
Units with a separate mechanically powered feed intake or attachments
Electrically powered and battery-powered shredders and chippers
Environmental hazards and electromagnetic compatibility

Editions and the UK supply rules

BSI says BS EN 13525:2020 supersedes BS EN 13525:2005+A2:2009, which is withdrawn. The 2020 edition adds requirements for moving parts. HSE's information sheet on power-fed mobile chippers says new machines supplied on or after 27 June 2005 must comply with the 2005+A2:2009 edition.

The Supply of Machinery (Safety) Regulations 2008, as made, apply to products placed on the market or put into service on or after 29 December 2009. Regulation 4 describes machinery as an assembly with a drive system other than directly applied human or animal effort, made of linked parts, at least one of which moves, joined together for a specific application.

Sources