The European Tree Worker and Tree Technician standards: curriculum units and exam content
The European Tree Worker curriculum has four units, and the exam has written, oral, tree identification and practical parts. The European Arboricultural Council also sets a Tree Technician exam for supervisors.
Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.
This page reports what the official source says. It is not legal advice: ask the office named here. The European Arboricultural Council (EAC) sets the European Tree Worker (ETW) curriculum and exam rules. National member bodies and certification centres run the exams. The ETW exam rules cited here are the January 2021 version. Tree work across Europe has its own guide.
The four curriculum units
The EAC's ETW page says tree maintenance comprises planting, monitoring and maintenance of trees. The curriculum names four units the Tree Worker has to know.
- Elements of tree maintenance
- Safe working practice
- Arboricultural matters with practical experience
- Legal and social regulations
The curriculum is the basis for the skills and knowledge a Tree Worker acquires, for national preparation courses and for the certification scheme. The ETW handbook is trilingual and carries a glossary of technical terms.
Conditions of entry
The January 2021 exam rules require candidates to be at least 18 and to sign the Code of Ethics. They also set out the proofs the candidate provides. The examining board is the sole arbiter of entry.
- Proof of physical and mental ability for tree care, by medical certificate or self-declaration.
- A valid first aid qualification under national regulations.
- Training in chainsaw use, and a chainsaw licence where the home country requires one.
- For climbers and MEWP operators, at least one year of practical tree care experience.
- For climbers, proof of aerial rescue skills, or else Simulation 3 in the exam.
- For MEWP operators, proof of skills in using a platform and in emergencies.
Exam parts
| Part | Content | Time and pass mark |
|---|---|---|
| Written | 30 multiple choice questions with four answers, and 8 open questions on national directives and legal requirements, including one on nature protection law | 60 minutes. Pass: 50% in each half |
| Oral | Two examiners, with samples and visual aids as needed | 15 to 20 minutes. Pass: 50% of the part |
| Tree identification | 15 fresh samples, broadleaved and conifer, with genus, species and common name written down at 3 points each | 15 minutes at most. Pass: 67%, which is 30 of 45 points |
| Practical, climbing | Crown pruning with climbing techniques, with an access line the candidate places and a rescue system set up by the board | 60 minutes, of which 30 at most for reaching the first working position. Pass: 50% of the part |
| Practical, platform or MEWP | Crown pruning from a platform, with one operator and one ground worker | 60 minutes, of which 30 at most for setup and reaching the first working position. Pass: 50% of the part |
| Ground worker | A 60 minute practical in a team with the climber or operator, plus an oral | 60 minutes plus 15 minutes oral. Pass: 50% of the part |
The general practical rules set the exam trees at 15 metres or taller, with a working height of at least 10 metres. They add that securing the worksite is part of the exam, along with the equipment check, risk assessment and communication between climber and ground worker. Every candidate demonstrates chainsaw use in the tree on at least five different cuts, shows handsaw use, and prunes both live wood and deadwood.
Simulations
Simulations 1 and 2 each run 20 to 30 minutes with two examiners. They are an explanation and demonstration of arboricultural operations in a realistic setting. Their subjects are chosen from six topics.
- Pruning young trees
- Planting and transplanting
- Basic tree inspection
- Crown stabilisation (tree bracing)
- Felling and rigging
- Protection of trees on construction sites
Simulation 3 is an aerial rescue test. It applies only where the candidate's country has no formal aerial rescue certification.
Passing, retaking and renewal
Certification needs 50 percent in every part and 67 percent in tree identification. Candidates may retake a failed part twice, no sooner than one month and no later than two years after the first exam. Successful candidates receive the diploma and an ID card, and may use the title "Certified European Tree Worker - climbing and/or platform".
The certificate lasts three years. The EAC lists four items for renewal. One is tree care work in 24 of the previous 36 months. Another is a valid first aid qualification. The others are proof of ability to work at height and 30 hours of seminars or courses in the previous 36 months.
The Tree Technician exam
The EAC defines the European Tree Technician (ETT) as a person in, or aiming for, junior or middle management or a supervisory role. Entry needs an ETW certificate or a recognised green industry diploma, plus three years of experience. The exam has a written part of up to 180 minutes, a tree inspection exercise of up to 60 minutes, and an exercise in economics, law and social studies of up to 180 minutes. The ETT page links its curriculum to the EAC Infocenter instead of listing units. The ETT has its own guide.
Sources
- European Arboricultural Council, European Tree Worker (ETW) page, read October 16, 2026
- European Arboricultural Council, European Tree Worker Certification Exam Rules and Regulations, version January 2021, as hosted on the SZKT site, read October 16, 2026
- European Arboricultural Council, European Tree Technician (ETT) page, read October 16, 2026