Flagger training and certification: US MUTCD, British Columbia and Victoria
The US MUTCD says flaggers should be trained in safe traffic control and public contact. British Columbia requires traffic control persons to complete a Board-approved program with a knowledge and practical assessment.
Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.
This page reports what the official source says. It is not legal advice: ask the office named here.
| Source | Training wording |
|---|---|
| US MUTCD 2009, 6E.01 | Guidance: flaggers should be trained in safe traffic control practices and public contact techniques |
| WorkSafeBC OHSR 18.6.2 | The employer requires a traffic control person to have completed a Board-approved program, with a knowledge and practical assessment |
| WorkSafe Victoria | The employer provides information, instruction, training or supervision needed to work safely |
United States: MUTCD Chapter 6E
The Manual on Uniform Traffic Control Devices, 2009 edition with revisions 1 and 2, puts flagger qualifications in section 6E.01 as guidance, not a mandatory standard. Flaggers make the most contacts with the public of all highway workers and are responsible for public safety, so they should be trained in safe traffic control practices and public contact techniques. The section lists five abilities a flagger should be able to show:
- Receive and pass on specific instructions firmly and courteously.
- Move and maneuver quickly to avoid danger from errant vehicles.
- Control signaling devices such as paddles and flags to give clear guidance to drivers in frequently changing situations.
- Understand and apply safe traffic control practices, sometimes in stressful or emergency situations.
- Recognize dangerous traffic situations and warn workers in time to avoid injury.
Section 6E.02 is a standard. For day and night work, flaggers shall wear high-visibility safety apparel that meets Performance Class 2 or 3 of ANSI/ISEA 107-2004, in fluorescent orange-red, fluorescent yellow-green or a mix, with retroreflective material visible at a minimum of 1,000 feet. For night work the guidance suggests Class 3. Section 6E.07 requires flaggers to use a STOP/SLOW paddle, a flag or an Automated Flagger Assistance Device, and prohibits hand movements alone except for law enforcement personnel or emergency responders at incident scenes. Where an AFAD is used, section 6E.04 says only a flagger trained on its operation operates it.
Chapter 6E names no certificate and no issuing body.
British Columbia: OHS Regulation Part 18
Part 18 defines a traffic control person as someone who has completed the training in section 18.6.2 and is designated or assigned by the employer to direct traffic. Section 18.6.2 says the employer must see that a traffic control person has completed a Board-approved traffic control training program. On and after December 1, 2023 the program must be based on an analysis of the knowledge, skills and abilities the job needs. It must also use the training and competency assessment criteria in one of these:
- ISO/IEC 17024:2012, Conformity Assessment, General Requirements for Bodies Operating Certification of Persons
- ANSI/ICE 1100:2019(E), Standard for Assessment-Based Certificate Programs
- ASTM E2659-18, Standard Practice for Certificate Programs
- CAN/CSA Z1001-18, Occupational health and safety training
- another standard acceptable to the Board
Completion includes an assessment of the trainee's knowledge of the subject matter and practical competency. Other parts of Part 18 set limits. Traffic control persons are not used where the speed limit is above 70 km/h, and are not positioned in an intersection open to traffic or in the travelled portion of a roadway. A safe location is on the shoulder or curb, or in a closed lane, with an unobstructed escape route, 25 metres or more from the work zone unless that is not practicable.
Two other groups are named. Section 18.6.3 sets workplace training with coursework and a practical component for a traffic assistant, who directs motorists within parking or holding areas. Section 18.6.1 lets an emergency responder direct traffic in an emergency only after training in basic traffic control principles, temporary traffic control devices, the Traffic Management Manual, use of a buffer vehicle, safe work procedures and protective clothing. After 2 hours from the start of the emergency, the responder needs the section 18.6.2 training. These sections were enacted by B.C. Reg. 222/2021, effective December 1, 2021.
Victoria, Australia
WorkSafe Victoria publishes a set of guidance pages on temporary traffic management for employers. The page on health and safety in temporary traffic management says an employer must provide employees with the necessary information, instruction, training or supervision they need to work safely.
Sources
- US Federal Highway Administration, MUTCD 2009 Edition with Revisions 1 and 2, Chapter 6E Flagger Control, read October 16, 2026
- WorkSafeBC, OHS Regulation Part 18 Traffic Control, read October 16, 2026
- WorkSafe Victoria, Traffic management guidance index, read October 16, 2026
- WorkSafe Victoria, Health and safety in temporary traffic management, read October 16, 2026