Forwarders, skidders, harvesters and winches: forestry machines by type
OSHA defines a logging machine and lists skidders and feller-bunchers in it. British Columbia defines skidding, yarding and the mobile yarder. The Forest Service describes the forwarder and the harvester.
Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.
This page reports what the official source says. It is not legal advice: ask the office named here. OSHA 29 CFR 1910.266, the logging standard, and Part 26 of the British Columbia Occupational Health and Safety Regulation (consolidated to October 13, 2026) define machines for safety rules. The US Forest Service Forest Operations Equipment Catalog describes how forwarders and harvesters are built and used. It carries no safety rule.
Machine types in the three documents
| Type | Wording |
|---|---|
| Forwarder | Forest Service: an extraction machine that removes material from the woods fully suspended in bunks. It is an articulated machine with an operator's cab and a log bunk, basically a tractor pulling a wagon load of wood. Up to eight wheels, a fixed or rotating cab, and often a boom-mounted grapple |
| Harvester | Forest Service: a machine that produces cut-to-length material and can stack the processed logs near a skid trail for the forwarder. British Columbia has a rule on the mechanical harvester but Part 26 gives no definition |
| Skidder | OSHA names it in the definition of machine. British Columbia defines skidding as moving logs with mobile equipment that travels while the logs are dragged |
| Winch | OSHA: winching is the winding of cable or rope onto a spool or drum. British Columbia: cable logging is a yarding system using winches, blocks and cables |
| Feller-buncher | OSHA lists tree shears and feller-bunchers as mechanical felling devices inside its definition of machine |
| Mobile yarder | British Columbia: a logging machine on wheels, tracks or skids with a vertical or inclined spar, tower or boom, used in skyline, slackline, modified slackline, high lead or grapple cable logging |
OSHA 1910.266
OSHA defines a machine as stationary or mobile equipment with a self-contained powerplant, operated off-road and used for the movement of material. The list includes tractors, skidders, front-end loaders, scrapers, graders, bulldozers, swing yarders, log stackers, log loaders, and mechanical felling devices such as tree shears and feller-bunchers. Aircraft are left out. The standard says it does not cover the construction or use of cable yarding systems.
It defines skidding as the yarding of trees or logs by pulling or towing them across the ground, and yarding as the movement of logs from where they are felled to a landing. An arch is an open-framed trailer or built-up frame that suspends the leading ends of trees or logs when they are skidded. A choker is the sling that is passed around the end of a log and hooked to the lifting or pulling machine.
Each tractor, skidder, swing yarder, log stacker, log loader and mechanical felling device placed into initial service after February 9, 1995 must have a falling object protective structure, a rollover protective structure, or both. Machines that rotate 360 degrees are exempt. A cab made after August 1, 1996 needs mesh enclosure with openings no larger than 2 inches. Back-up brakes and parking brakes are required on machines placed into service on or after September 8, 1995.
British Columbia Part 26
The regulation defines a bunk as a horizontal bolster fitted with a stake at each end. A turn is one or more logs skidded or yarded to the landing at one time. Yarding means moving logs with equipment that does not travel while the logs are moved, which separates it from skidding. Part 26 does not define a winch, but it does define cable logging.
Where the manufacturer's slope stability limit is unknown, the regulation sets these maximum slopes:
- 35 percent for a rubber-tired skidder.
- 40 percent for a crawler tractor, feller-buncher, excavator and similar equipment.
- 50 percent for other forestry equipment designed for steep slopes.
The regulation allows equipment beyond these limits where a qualified person has made a risk assessment and written safe work practices acceptable to the Board are in place. It bars operation anywhere that stability cannot be assured. A mechanical harvester must not fell a tree that poses a foreseeable risk to the operator or that the harvester cannot fell safely. Before mechanical felling, all workers and equipment other than the operator and the harvester must be clear of a 2 tree-length radius. On winches, the regulation sets at least 1 1/2 layers of cable on the drum for skylines and 3 complete wraps for other logging equipment, and the rule does not apply to a skidding winch on ground-based equipment. It bars knots in winch lines except for temporary repair, tag lines on grapple log loaders and hooks on strawline eyes.
Forest Service forwarder and harvester notes
The Forest Service says forwarders usually work in a fully mechanized system with workers enclosed in cabs, and that slopes are the biggest hazard. Because the load is fully suspended, the catalog says soil disturbance from dragging is minimal. It also says forwarders cost more to buy than skidders and are limited to extracting processed material.
The page's slope line, written about harvesters, gives tracked machines up to 55 percent, wheeled machines usually under 40 percent, and a tracked articulated machine reportedly up to 80 percent. The forwarders page prints no slope figure for skidders or winches.
Sources
- OSHA, 29 CFR 1910.266 Logging operations, standard page, read October 16, 2026
- eCFR, 29 CFR 1910.266 Logging operations, current text, read October 16, 2026
- British Columbia, Occupational Health and Safety Regulation B.C. Reg. 296/97, Part 26, consolidation current to October 13, 2026, read October 16, 2026
- US Forest Service, Forest Operations Equipment Catalog: Forwarders, read October 16, 2026