ArbNation Join free

Garden shredders and consumer chippers: recalls, EN 13683 and when a homeowner machine is not a professional chipper

EN 13683 covers hand fed garden shredders/chippers used standing on the ground, and EN 13525 covers professional wood chippers. Health Canada's 2023 notices recall two lines of consumer chipper shredders for a laceration hazard.

Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.

This page reports what the official source says. It is not legal advice: ask the office named here. Two European standards draw the line between a garden shredder/chipper and a professional wood chipper, and Health Canada's recall notices show what a consumer machine failure looks like in the register.

The two standards

The Swedish Institute for Standards describes EN 13683 as Garden equipment, integrally powered shredders/chippers, safety. It applies to hand fed machines with an integral power source that reduce organic material to smaller pieces. They are for outdoor use in a stationary position, by an operator standing on the ground. Each feed opening or segment fits into a 250 mm by 250 mm square, measured at the relevant safety distance to the cutting means, though the total opening can be any size.

EN 13683 does not cover units driven by an external power source or mobile use of units that work in both stationary and mobile modes. It also leaves out units with powered discharge meant to broadcast material or load vehicles, and units with a mechanically powered feed intake. Environmental hazards and electromagnetic compatibility are outside it. The institute lists the 2003 edition as withdrawn and replaced by SS-EN 13683+A1:2009.

EN 13525:2020, as the Genorma catalogue prints it, covers wood chippers used in forestry, agriculture, horticulture and landscaping. Self-propelled, mounted, semi-mounted and trailed machines are all in scope, loaded by hand through a horizontal or near horizontal infeed chute and used when stationary. The standard names shredders/chippers covered by EN 13683 as outside its scope.

Garden shredder/chipper and professional chipper scopes
FeatureEN 13683 shredder/chipperEN 13525 wood chipper
PowerIntegral power sourceExternal power take-off, hydraulics or integral power source
LoadingHand fed, operator on the groundManually loaded through an infeed chute
UseOutdoors, stationaryStationary, self-propelled, mounted, semi-mounted or trailed
OpeningFits a 250 mm by 250 mm squareHorizontal or near horizontal infeed chute

Recalls in the consumer register

Health Canada's recall search for chipper shredder returns 21 items, of which 2 are consumer product recalls and 18 are Transport Canada vehicle recalls. Both consumer recalls are for one maker's chipper shredders, joint with the United States Consumer Product Safety Commission.

Health Canada consumer recalls of chipper shredders
NoticeIssue and counts
March 2, 2023, PRO XL501, model CS35050BENThe fin scroll can fail and eject metal pieces from the hopper, a laceration hazard. 6 failure reports in the United States, none in Canada. 27 units sold in Canada and 2,100 in the United States, August 2019 to September 2022
September 21, 2023, 13 modelsParts can come loose inside the housing, and hoppers can detach. 1 report in Canada and 23 in the United States, with no injuries reported. About 90 units sold in Canada and 5,900 in the United States. Models starting CS3 sold September 2019 to August 2023, models starting CS4 August 2022 to August 2023

Both notices tell consumers to stop using the machines and contact the company. The first gives repair instructions and the second a full refund or a free repair. The Canada Consumer Product Safety Act prohibits recalled products from being redistributed, sold or given away in Canada. The 2023 recalls are also on the site's page for the 2023 chipper shredder recall, and other machine recalls are in the machine recall register.

Sources