Gear bags and rope bags: types and storage rules without brands
No code or regulator describes bag types. They do set storage rules: a chemically neutral, dry, dark place away from heat, sharp edges and rodents, and a climbing rope bagged and clipped to the harness for a crane lift.
Checked against the sources at the bottom of this page on October 21, 2026. Rules, fees and pay change: the source has the last word.
The facts on this page come from the Industry Code of Practice for Arboriculture: Tree Work at Height (ICoP, Edition 2, May 2020), two fall protection regulations and a rope maker's technical notice. It is not training and does not teach the work.
Storage and transport in the ICoP
ICoP clause 3.11.5 says storage and transport must follow the manufacturer's guidance. Equipment is to be kept in a chemically neutral, dry and dark environment. The clause names the things to keep it away from: extremes of heat, sharp edges, corrosive substances and rodents. All equipment must be dried before storage to prevent corrosion and fungal attack, particularly of textiles.
Clause 3.11.1 lists how and where equipment is stored out of use among the factors to consider when inspecting and maintaining it, next to the type of equipment, intensity of use and operating environment. Clause 3.11.4 adds that age, use and storage conditions have a significant bearing on lifespan.
Under clause 3.10.4, equipment is to be supplied with information on its safe use, maintenance, storage, examination and repair. The record clause, 3.11.7, includes any information about storage requirements in the list of what an equipment record holds.
The rope bag in a crane lift
The ICoP names the rope bag in one place. Where a risk assessment finds a crane the safest way into the tree, clause 3.8.4.2 lists items the lift must be planned around. One of them is that the climbing rope must be bagged and the bag clipped to the climber's harness. The stated reason is to prevent trailing and possible entanglement with lifting accessories, the tree or other obstacles.
Fall protection rules that reach the bag
| Source and clause | Wording in brief |
|---|---|
| OSHA 29 CFR 1910.140(c)(20) | Ropes, belts, lanyards, lifelines and harnesses used for personal fall protection must be protected from being cut, abraded, melted or otherwise damaged. |
| OSHA 1910.140(c)(18) | Personal fall protection systems are inspected before initial use during each workshift for mildew, wear, damage and other deterioration. Defective components are removed from service. |
| WorkSafeBC OHS Regulation 11.9 | Equipment in a fall protection system must be kept free from substances and conditions that could contribute to its deterioration, and must be maintained in good working order. It is inspected by a qualified person before use on each workshift. |
The rope maker's notice
A technical notice for an EN 892 dynamic climbing rope carries a storage and transport pictogram. Its text states that failure to store the product properly can cause premature aging. The notice also names chemicals, sharp edges and extreme temperatures among the factors that can lead to a rope being retired after a single exceptional event.
Gaps in the sources
None of the sources describes a gear bag, a rope bag or a kit bag as a type. Sizes, materials and carry styles are not in the record. The only bag wording is the crane-lift clause above.
Sources
- Arboricultural Association, Industry Code of Practice for Arboriculture: Tree Work at Height, Edition 2, May 2020, read October 21, 2026
- OSHA, 29 CFR 1910.140 Personal fall protection systems, read October 21, 2026
- WorkSafeBC, OHS Regulation Part 11 Fall Protection, section 11.9, read October 21, 2026
- Petzl, Technical notice R0012200G, EN 892 dynamic rope, read October 21, 2026