ArbNation Join free

Tree work words: cranes and lifting

Rated capacity, tagline, fall zone, qualified rigger and thorough examination: the crane and lifting terms in OSHA's construction crane rule and the UK's LOLER regulations, in plain words.

Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.

OSHA's cranes and derricks rule, 29 CFR 1926.1401, defines the words used on a crane removal in the United States. The rule is in Subpart CC of the construction standards. ASME lists its own standard for the machines, B30.5 Mobile and Locomotive Cranes, in a 2025 edition. In Great Britain the Lifting Operations and Lifting Equipment Regulations 1998 (LOLER) carry a shorter set of definitions.

Load and capacity

TermMeaning in the official text
Rated capacityOSHA: the maximum working load the manufacturer permits under specified working conditions. Those conditions usually combine equipment configuration, radius, boom length and other parameters of use.
LoadOSHA: the object being hoisted, its weight, or both. It counts the load-attaching equipment too, such as the load block, ropes, slings and shackles. LOLER adds that a load includes a person.
Load moment indicatorOSHA: a system that senses the overturning moment, which is load multiplied by radius. It compares that with rated capacity and shows the operator the percentage of capacity in use. Lights, bells or buzzers may warn of an overload.
Load moment limiterOSHA: the same sensing, but when rated capacity is reached it shuts off the functions that raise the loading, such as hoisting, telescoping out or luffing out. Lowering, telescoping in and luffing in usually stay available.
CounterweightOSHA: a weight that adds to the equipment's weight to keep it stable by balancing the load.
BlockingOSHA: wood or other material that supports equipment or a component and spreads loads to the ground. Another name is cribbing. It is used under outrigger and stabilizer floats.

Lifting words

TermMeaning in the official text
HoistOSHA: a mechanical device for lifting and lowering loads by winding a line onto or off a drum.
HoistingOSHA: raising, lowering or otherwise moving a load in the air with covered equipment. It can be done by means other than wire rope and a hoist drum.
BoomOSHA: an inclined spar, strut or other long structural member that supports the upper hoisting tackle. Length and angle can usually change to give more height or reach. On a tower crane, a fixed horizontal member is a jib and one that moves up and down is a boom.
Articulating craneOSHA: a crane whose boom is a series of folding, pin-connected members, usually extended and retracted by hydraulic cylinders.
Assist craneOSHA: a crane used to assemble or disassemble another crane.
Controlled load loweringOSHA: lowering through the hoist drive, using the gear train or hydraulics, rather than the load hoist brake.
Free fallOSHA: only the brake regulates the descent of the load line. The drive mechanism does not drive the load down or slow it.
TaglineOSHA: a rope, usually fibre, fixed to a lifted load to control spinning and pendular motion.
Fall zoneOSHA: the area, including the ground beneath the load, where suspended material could reasonably be expected to fall in an accident.

People named in the rule

TermMeaning in the official text
Competent personOSHA: someone who can identify existing and predictable hazards in the surroundings or working conditions and who has authority to take prompt corrective measures.
Qualified personOSHA: someone who has a recognized degree, certificate or professional standing, or extensive knowledge, training and experience, and has shown the ability to solve problems on the subject, work or project.
Qualified riggerOSHA: a rigger who meets the criteria for a qualified person.
OperatorOSHA: a person operating the equipment.

LOLER terms in Great Britain

Regulation 2 of LOLER 1998 defines lifting equipment as work equipment for lifting or lowering loads, including the attachments used to anchor, fix or support it. An accessory for lifting is lifting equipment for attaching loads to machinery. Work equipment is any machinery, appliance, apparatus, tool or installation for use at work.

A thorough examination is one carried out by a competent person, with testing where that is appropriate. An examination scheme is a suitable scheme drawn up by a competent person for thorough examinations at suitable intervals. The HSE's LOLER page groups its guidance under the regulations overview, safe lifting by machine, planning lifting operations, lifting people and thorough examination.

Hoisting a person

OSHA's 1926.1431 covers hoisting personnel. It prohibits using crane equipment to hoist employees unless the employer shows that reaching the work by a ladder, aerial lift or scaffold would be more hazardous or is not possible. The employees ride in a personnel platform, with exceptions the rule lists.

Under the same section, the equipment must be level within one percent of level grade. Outriggers or stabilizers must be fully extended and locked. The total load of a suspended or boom-attached platform must not exceed 50 percent of the rated capacity for the radius and configuration. The connection must keep the platform within 10 degrees of level.

Sources