ArbNation Join free

Health surveillance for tree workers: hearing tests, hand-arm vibration checks and lung function in HSE, OSHA and WorkSafeBC texts

OSHA and WorkSafeBC set hearing test schedules for noise-exposed workers. The HSE describes health surveillance for noise, hand-arm vibration and wood dust, including a tiered vibration approach and spirometry.

Checked against the sources at the bottom of this page on October 21, 2026. Rules, fees and pay change: the source has the last word.

This page reports what the official source says. It is not legal advice: ask the office named here. It sets out health surveillance as OSHA, WorkSafeBC and the UK Health and Safety Executive describe it for the hazards of tree work: noise, hand-arm vibration and dust.

Hearing tests in the OSHA noise standard

Paragraph (g) of 29 CFR 1910.95 sets the audiometric testing program. The employer makes audiometric testing available to all employees whose exposures equal or exceed an 8-hour time-weighted average of 85 decibels.

  • A valid baseline audiogram is established within 6 months of an employee's first exposure at or above the action level.
  • Where mobile test vans are used, the baseline is obtained within 1 year of first exposure.
  • Baseline testing is preceded by at least 14 hours without exposure to workplace noise, and hearing protectors may stand in for that quiet period.
  • A new audiogram follows at least annually for each employee exposed at or above 85 decibels.

The tests are pure tone, air conduction hearing threshold examinations, with frequencies of at least 500, 1000, 2000, 3000, 4000 and 6000 Hz, taken separately for each ear. A licensed or certified audiologist, otolaryngologist or physician, or a certified or demonstrably competent technician, performs them.

The standard defines a standard threshold shift as a change from baseline averaging 10 dB or more at 2000, 3000 and 4000 Hz in either ear. Employees are told of a shift in writing within 21 days of the determination.

Hearing tests in the WorkSafeBC regulation

Part 7 of the British Columbia Occupational Health and Safety Regulation sets a noise exposure limit of 85 dBA Lex daily and 140 dBC peak. Where noise exceeds either limit, the employer must run a noise control and hearing conservation program. Hearing tests are one of its seven elements. Section 7.8 requires an initial test as soon as practicable after employment starts and no later than 6 months in, then a test at least once every 12 months. A hearing tester authorized by the Board administers the tests and the employer sends the results to the Board.

The HSE on hearing checks

The HSE's page on health surveillance for hearing describes regular hearing checks in controlled conditions, telling employees the results, keeping health records and examination by a doctor where damage is found. Employers must provide surveillance for employees likely to be regularly exposed above the upper exposure action values, or at risk for another reason such as existing hearing loss. Checks usually run annually for the first two years of employment and then at three-yearly intervals, more often if a problem is found.

Hand-arm vibration in the HSE tree work guidance

The HSE page on hand-arm vibration in forestry and arboriculture says the regulations require health surveillance where workers are considered to be at risk. Any worker exposed above the 2.5 m/s2 A(8) action level is entitled to it, and it must include access to an occupational physician.

The HSE advises a tiered approach. The first step is a questionnaire-based interview on employment and then annually, to pick out possible early symptoms. Workers who show signs of possible injury go on to more detailed investigations. Workers who used high-vibration tool designs in the past are likely to show symptoms, and for them surveillance checks whether hand-arm vibration syndrome is advancing.

Dust and lung function in the HSE pages

The HSE wood dust page says the COSHH Regulations 2002 require employers to protect workers from the hazards of wood dust. Breathing wood dust can cause asthma, so a surveillance programme should cover all workers who might breathe it, with advice from an occupational health professional. It should involve an appropriate questionnaire and spirometry. Ongoing assessments are at appropriate frequencies, usually annually, with more frequent ones for new workers. A health record is kept for each worker under surveillance.

On COPD, the HSE describes surveillance as a fitness for work assessment at the start of employment. It uses symptom enquiry and lung function testing. Later come questions about new or worsening symptoms and repeat testing at intervals. Any occupation with a risk of occupational asthma requires regular health surveillance.

Gaps in these texts

The OSHA and WorkSafeBC texts above deal with hearing only. The HSE COPD page names repeat lung function testing at intervals without giving a figure.

Sources