Hedge trimmer safety: what ISO 10517, EN 62841-4-2, OSHA and one maker's manual publish
Two standards cover hand-held hedge trimmers, ISO 10517 for combustion engines and EN 62841-4-2 for electric ones. OSHA has one general tool rule, and a maker's manual lists guards, checks and distances.
Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.
This page reports what the official source says. It is not legal advice: ask the office named here. The standards bodies' pages give scope and status, not clause text. The guard and stop details below come from one maker's operator's manual.
ISO 10517:2019, combustion-engine hedge trimmers
EVS, the Estonian standards body, and SIS, the Swedish Institute for Standards, list ISO 10517:2019, Powered hand-held hedge trimmers, Safety, as EVS-EN ISO 10517:2019 and SS-EN ISO 10517:2019. The EVS page gives it as valid from March 15, 2019. The EVS history lists the 2009 edition and a 2013 amendment before it. SIS gives the status as valid.
Both pages carry the same scope text. The document specifies safety requirements and measures for verifying the design and construction of hand-held, integrally driven combustion engine hedge trimmers. The trimmers are designed for a single operator trimming hedges and bushes with one or more linear reciprocating cutter blades. It also applies to split-boom hedge trimmers and to multi-purpose machines when configured as a hedge trimmer.
The scope adds further points. The standard sets methods for eliminating or reducing the hazards from the trimmers. It specifies the type of information the manufacturer provides on safe working practices. It deals with all significant hazards, hazardous situations and events relevant to these trimmers when used as intended and under conditions of misuse that the manufacturer can reasonably foresee. It does not apply to hedge trimmers with an engine displacement over 80 cm3, or to trimmers manufactured before the date of its publication.
EN 62841-4-2, electric hedge trimmers
BSI Knowledge lists BS EN 62841-4-2:2019+A11:2022 as Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety. Particular requirements for hedge trimmers. BSI gives its status as current, shows it as published on January 31, 2023, and marks it Designated. Its committee is CPL/116, and its descriptors include reciprocating parts, blades and electrical safety. The page publishes no clause text.
OSHA 1910.242
The logging standard, 29 CFR 1910.266, has no hedge trimmer wording. The general tool rule, 29 CFR 1910.242(a), makes each employer responsible for the safe condition of tools and equipment used by employees, including tools and equipment the employees furnish themselves. The rule names no guard, blade or stop time. The guide to hand tool safety rules goes further into that rule and the logging inspection list.
One maker's manual, long-reach petrol models
The facts in this section come from the operator's manual of one maker for its 326HDA55X, 326HE3X and 326HE4X series. The manual is for long-reach petrol hedge trimmers. It is not training and does not teach the work. The manual describes the machine's protective equipment and gives the checks it lists for each part.
| Protective part | Function and check the manual lists |
|---|---|
| Throttle trigger lock | The trigger can be pressed in only while the lock is held in by the operator's grip. On release, two independent return spring systems lock the throttle at idle. The check is that the throttle returns to idle when the lock is released. The blades are then checked to stop and stay at a standstill at idle |
| Stop switch | Stops the engine. The check is to start the engine and move the switch to stop |
| Hand guard | Keeps the operator's hands from the blades, for example if the grip on the front handle is lost. The check is that it is fitted correctly and undamaged |
| Blade guard | Protects against any part of the body touching the blades. The manual lists replacing it if bent or damaged |
| Vibration damping system | Reduces the transfer of vibration between the engine unit and blades and the handles. The check is for cracks and distortion in the element and for secure attachment |
| Muffler | Directs exhaust away from the operator. The check is that it is secure, and that any spark arrest screen is cleaned regularly |
| Blades | The manual gives 0.2 to 0.4 mm of play between the blades, measured at the screws, when correctly adjusted. Bent or damaged blades are replaced |
The manual states that a hedge trimmer must never be used with defective protective equipment. It also says the machine is only designed for cutting branches and twigs. Cutting equipment continues to rotate even after the throttle is released, so the manual has the engine stopped, the blades fully stopped and the spark plug cable removed before work on the cutting equipment.
The manual lists these working statements. Both hands hold the machine, on the side of the body. Hands and feet are kept clear of the blades while the engine runs, and no one works on a ladder, stool or other raised position that is not fully secured. Branch stumps can be thrown out during cutting. Stones and other objects can be thrown when cutting too close to the ground. If an object is hit or vibration occurs, the manual has the machine stopped at once and the spark plug cable removed to check for damage. A transport guard is fitted to the blades when the machine is stored or carried.
Two distances appear in the manual. The machine is not electrically insulated, and it lists a distance of at least 10 m (30 ft) between the machine and live electricity lines or objects touching them. If work must be closer, the manual has the power company contacted to switch the power off first. Because the machine has a long reach, it gives 15 m (45 ft) as the distance within which no people or animals come while the machine runs. It also lists approved eye protection, ear protection, protective gloves, anti-slip boots and thick, long trousers, and says to remove hearing protection as soon as the engine stops so warning sounds can be heard.
Sources
- EVS (Estonia), EVS-EN ISO 10517:2019 Powered hand-held hedge trimmers, Safety, standard page with scope, read October 16, 2026
- Swedish Institute for Standards (SIS), SS-EN ISO 10517:2019 standard page with scope and status, read October 16, 2026
- BSI Knowledge, BS EN 62841-4-2:2019+A11:2022 hedge trimmers standard page (published January 31, 2023), read October 16, 2026
- OSHA, 29 CFR 1910.242 Hand and portable powered tools and equipment, general, eCFR current text, read October 16, 2026
- Husqvarna, operator's manual for the 326HDA55X, 326HE3X and 326HE4X long-reach hedge trimmers, read October 16, 2026