ArbNation Join free

Inspection intervals for climbing gear by item and country

Each rule sets its own interval for rope, harness, lanyard, connector, descender and helmet: every shift, every use, every 6 months or every year. The table sets out five jurisdictions, item by item.

Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.

This page reports what the official source says. It is not legal advice: ask the office named here. The wording below is closely restated from the OSHA rule, the WorkSafeBC regulation, the UK lifting regulations and HSE guidance, the SafeWork NSW code of practice and a New Zealand industry guide.

The rules use three different ideas. A pre-use check is the user looking at the item before work. An inspection is a closer look by a competent or qualified person. A thorough examination is a periodic, written examination. Few rules use all three words.

Interval table by item and country

North America

Interval wording for each item. "No interval given" means the opened source names none for that item.
ItemUnited States, OSHABritish Columbia, WorkSafeBC
RopeBefore initial use each workshiftBefore first use each work shift
HarnessBefore initial use each workshiftBefore first use each work shift
LanyardBefore initial use each workshift; each knot inspected before useBefore first use each work shift
ConnectorBefore initial use each workshiftBefore first use each work shift
Descender or lowering deviceBefore initial use each workshift, as a system componentBefore first use each work shift, as part of the system
HelmetNo interval givenNo interval given

United Kingdom

ItemLOLER and HSE wording
RopeInspected every day; written weekly record for high-wear items such as ropes; thorough examination at the LOLER period
HarnessListed as lifting equipment; thorough examination at the LOLER period
LanyardStrops are listed as lifting equipment; thorough examination at the LOLER period
ConnectorKarabiners are listed as lifting equipment; thorough examination at the LOLER period
Descender or lowering deviceRigging systems for lowering branches are listed; the period depends on the kind of lifting equipment
HelmetNo interval given

Australia and New Zealand

ItemNew South Wales, SafeWork NSWNew Zealand, NZ Arb guide
RopeBefore and after each use; removed from service when unsafeBefore each use
HarnessBefore and after each use; inspections at least annuallyComponents checked before use
LanyardBefore and after each use; webbing retired on any visible cutBefore each use
ConnectorBefore, during and after useBefore each use, as other climbing equipment
Descender or lowering deviceLowering equipment before, during and after each useTackle blocks, pulleys and connecting links before use
HelmetPPE regularly inspected; no helmet interval givenBefore use

United States

OSHA 29 CFR 1910.140(c)(18) requires personal fall protection systems to be inspected before initial use during each workshift for mildew, wear, damage and other deterioration. Defective components must be removed from service. Paragraph (c)(19) names ropes, belts, lanyards and harnesses used for personal fall protection.

Under (c)(17), a system or component that has been impact loaded is removed from service immediately. It stays out until a competent person inspects it and finds it undamaged and safe. Under (c)(6), a competent or qualified person inspects each knot in a lanyard or vertical lifeline before any employee uses it. The text is on the OSHA 1910.140 page.

British Columbia

WorkSafeBC Part 26 defines a tree-climbing system as the equipment a person relies on for support and security while climbing, including harness, climbing lines and lanyards. Section 26.12.0.6, in force from December 1, 2021, requires inspection by a qualified arborist before the system is first used on each work shift.

Each piece is removed from service as the maker specifies or if it is defective. The whole system comes out if any piece arrests a fall. It returns only after the maker, its authorized agent or a professional engineer has inspected and certified it safe. The full wording sits in the Part 26 forestry operations text.

Section 11.9 of Part 11 on fall protection asks for inspection by a qualified person before use on each workshift. Section 26.42 asks for forestry rigging to be inspected at regular and frequent intervals by a qualified worker.

United Kingdom

LOLER regulation 9(3) sets the periods for lifting equipment exposed to conditions that cause deterioration liable to result in dangerous situations. Equipment for lifting persons, or an accessory for lifting, gets a thorough examination at least every 6 months. Other lifting equipment gets one at least every 12 months. An examination scheme is the alternative. An examination also follows each time exceptional circumstances liable to jeopardise safety have occurred.

The same paragraph adds that, if appropriate, a competent person inspects the equipment at suitable intervals between examinations. The regulation is on legislation.gov.uk, and its text is adapted here under the Open Government Licence v3.0.

Guidance from HSE, in its lifting equipment in arboriculture page lists rope access and work positioning systems, anchor points, ropes, karabiners, harnesses and strops as lifting equipment, and notes that a load includes a person. It calls for the main climbing rope and associated equipment to be inspected every day by a competent person. Arborists should be trained to make a daily pre-use check. For high-wear items such as ropes, HSE says a written weekly record of inspection should be kept. The HSE page prints no 6-month figure. That figure comes from the regulation.

New South Wales

The SafeWork NSW Tree works code of practice, which commenced on March 27, 2026, says the climber should thoroughly inspect climbing equipment before and after each use. Rope made unsafe by damage, defect or wear and tear should be removed from service. Harness inspections must be carried out at least annually. Lanyard webbing should be retired if there are any visible cuts.

Connection hardware is inspected for safe operation before, during and after use, and tree lowering equipment is inspected before, during and after each use. Prusik loops are inspected before and after each use for heat and abrasion damage. The code also asks for PPE to be regularly inspected and maintained, and says defective equipment must not be used. It names no separate helmet interval. The code is the Tree works code of practice.

New Zealand

The New Zealand Arboricultural Association publishes the guide Safety Requirements for NZ Arboricultural Operations, edition 3.1, 2022, version 2. It is an industry guide, not a WorkSafe New Zealand document. Clause 31.5 requires climbing lines, work lines, lanyards and other climbing equipment to be checked for damage, cuts, abrasion or deterioration before each use, and removed from service when excessive wear or damage shows.

Clause 30.6 asks arborists to check all harness components before use, and to retire the harness when signs of excessive wear or damage appear or the expiry date has lapsed. Clause 8.5 has helmets inspected before use and removed from service for excessive wear or damage. Otherwise they are replaced as the maker recommends.

Clause 51.2 has tackle blocks, pulleys, connecting links, chokers and slings inspected before use. The clause on logbooks ends with the printed fragment "6 monthly documented climbing equipment inspection". The full text is in the NZ Arb safety guide.

Sources