ArbNation Join free

Irish Forestry Safety Guides: the IFSG list and what each covers

The Health and Safety Authority lists ten Irish Forestry Safety Guides, from IFSG 301 on petrol chainsaws to IFSG 804 on electricity at work. IFSG 306 covers windblow, and IFSG 302 covers basic felling.

Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.

The named codes and training bodies are described here as published. It is not training and does not teach the work. The Health and Safety Authority (HSA) of Ireland publishes the Irish Forestry Safety Guides (IFSG) in its Forestry publications list. The leaflets are modified for Irish use, with permission, from the Forest Industry Safety Accord (FISA) guides in Great Britain.

The HSA list

GuideTitle on the HSA list
IFSG 301Using Petrol-Driven Chainsaws
IFSG 302Felling and Manual Takedown
IFSG 303Chainsaw Snedding
IFSG 304Cross Cutting and Manual Stacking
IFSG 306Chainsaw Clearance of Windblow
IFSG 307Chainsaw Felling of Large Trees
IFSG 503Extraction by Forwarder
IFSG 603Mechanical Harvesting
IFSG 804Electricity at Work
IFSG FC1Selecting and Monitoring Contractors

The same HSA list also carries a Forestry Information Sheet, Guidance on Safe Use of Chainsaws, a Chainsaw Safety Training Advice Information Sheet, a Safe Load Securing of Round Timber Information Sheet and two quad bike documents. There is no IFSG 305 on the list.

IFSG 302, felling and manual takedown

The HSA's page for IFSG 302 dates the leaflet to 2018. It covers basic felling and manual takedown in plantations, or of single trees in open spaces with a minimum of two tree lengths clear in all directions and where pulling aids are not required. The downloadable file is titled Basic Chainsaw Felling.

IFSG 306, chainsaw clearance of windblow

The HSA's page for IFSG 306 also dates it to 2018, and the PDF gives October 2018 as the publication date. The leaflet applies to manual harvesting of areas where most adjacent trees are windblown or broken, and to sporadic windblow inside or outside standing crops. It notes that mechanised systems should be considered as a safer alternative. It carries the warning that the operation is very hazardous and that every situation should be assessed carefully.

Its numbered paragraphs run under four headings: general advice, preparing to work, working, and broken trees. Four paragraphs show what the leaflet records:

  • Paragraph 1 says never to work in windblow alone.
  • Paragraph 10 keeps every other person at least twice the length of the tree away when felling or taking down standing, leaning or broken stems.
  • Paragraph 22 puts the final severing cut into the tension wood at least 25 mm from the first compression cut when a stem may spring upwards.
  • Paragraph 24 calls for restraining the stem with a winch at any time when side tension is considerable.

The leaflet says it sets out evidence of good practice for a specific forestry task. It adds that deviation should only be considered after a full risk assessment by competent persons. Its reading list names the HSA Code of Practice for Managing Safety and Health in Forestry Operations and the leaflets IFSG 301, 302, 303, 304, 306, 307, 503, 603 and 804.

The British FISA series

The UK Forest Industry Safety Accord lists its guides in numbered series, with the chainsaw guides in the 300s, and says each can be downloaded for printing. Its list shows FISA 603 Mechanical harvesting updated in September 2026, FISA 804 Electricity at work: Forestry and FISA 802 Emergency Planning, amended April 2021.

Sources