Kiln heat treatment of firewood for quarantine: the schedules in ISPM 15 and Illinois rules
ISPM 15 sets a 56 C core temperature held for 30 continuous minutes for wood packaging. Illinois sets 140 F (60 C) for at least 60 minutes for firewood moved more than 50 miles.
Checked against the sources at the bottom of this page on October 19, 2026. Rules, fees and pay change: the source has the last word.
This page reports what the official source says. It is not legal advice: ask the office named here. Two kinds of rule print heat schedules. ISPM 15, the international standard, covers wood packaging such as pallets and dunnage, not firewood. Illinois rule 8 Ill. Adm. Code 240.125 covers firewood. The US federal import rule, 7 CFR 319.40-3, covers marked wood packaging and refers its treatment to part 305 of the same title. Heat treatment of wood: what ISPM 15, the USDA and the Wood Handbook say gives the wider background.
The two schedules side by side
| Rule and applies to | Schedule |
|---|---|
| ISPM 15 Annex 1, kiln or steam chamber (mark HT), wood packaging | 56 C minimum for 30 continuous minutes, throughout the whole profile, core included |
| ISPM 15 Annex 1, dielectric heating (mark DH), wood packaging | 60 C minimum for 1 continuous minute, throughout the whole profile, surface included |
| Illinois 8 Ill. Adm. Code 240.125, firewood | 140 F (60 C) minimum core temperature for at least 60 minutes, at a facility the Illinois Department of Agriculture certified |
ISPM 15: the kiln schedule
Annex 1 of ISPM 15, adopted in April 2018, says kiln-drying, conventional steam heating and some other processes all count as heat treatment if they meet the parameters. For a conventional steam or dry kiln heat chamber, the fundamental requirement is a minimum of 56 C for a minimum of 30 continuous minutes throughout the entire profile of the wood, including its core.
Core temperature can be measured with sensors inserted into the wood. The annex also allows a schedule built from test treatments. In those tests, core temperatures at several places in the chamber are correlated with chamber air temperature. The tests take account of moisture content, species, thickness, air flow and humidity. They must show 56 C held for 30 continuous minutes throughout the wood.
The annex says the national plant protection organization (NPPO) should specify or approve treatment schedules and approve treatment providers. For heat chambers it lists points that the NPPO should consider:
- A sealed, well insulated chamber, with insulation in the floor.
- Uniform air flow around and through the stack, with spacers and fans as required.
- Sensors at the coldest location for each load.
- At least two core sensors, inserted at least 30 cm from the end of a piece and reaching the centre. Holes are sealed afterwards.
- Sensors and recorders calibrated per the manufacturer's instructions at a frequency the NPPO specifies, with temperatures logged during each treatment.
- Records of treatments and calibrations kept for the period the NPPO sets.
If the minimum temperature is not held, the annex gives corrective action: restart the treatment, or extend the time and raise the temperature if necessary. Bark may come off before or after heat treatment. Separate small pieces may stay if they are under 3 cm wide, or wider than 3 cm with each piece under 50 square cm.
How certification is shown
ISPM 15 requires a mark with a country code, a producer or treatment provider code assigned by the NPPO, and a treatment code. The treatment codes are HT for heat treatment, DH for dielectric heating, MB for methyl bromide and SF for sulphuryl fluoride. The mark is rectangular or square, inside a border, and large enough to read without a visual aid. The IPPC lists the standard as published on July 13, 2021.
The US import rule has its own marking text. Under 7 CFR 319.40-3(b), regulated wood packaging must have been treated under part 305 and carry a legible, permanent mark. The mark has a unique graphic symbol, the ISO two-letter country code, the producer number and a treatment abbreviation such as HT or MB. The rule prefers the mark on at least two opposite sides of the article.
Illinois: the firewood schedule
Illinois defines treated firewood as firewood heat treated to reach and hold a minimum core temperature of 140 F (60 C) for at least 60 minutes. The treatment must happen at a facility the Illinois Department of Agriculture has certified. The rule bars anyone from buying, selling or possessing untreated firewood more than 50 miles from its source. Firewood moved farther than that must be treated, in its original packaging, and carry a Department-approved label stating the heat treatment.
The label must appear on the bill of sale or lading, on the purchase receipt or invoice for bulk shipments, or on any bundle or package.
A facility is certified in one of two ways. Either its equipment is calibrated and checked for accuracy in front of the Director or the Director's designee, or it has an annual inspection from a kiln service provider, shown by inspection records of calibration and maintenance. Certified facilities keep records for at least three years and show them on request. The records give the treatment method, the volume treated, the duration and the date.
A separate Illinois provision bars buying, selling, possessing or importing untreated firewood into the state from outside it. State-certified firewood may enter with approved labelling or documents. Importers for resale need an annual certificate that expires each December 31. The section took effect January 1, 2009 and was amended effective October 27, 2022.
Sources
- IPPC and FAO, ISPM 15 Regulation of wood packaging material in international trade, Annex 1 (2018), PDF, read October 19, 2026
- International Plant Protection Convention, ISPM 15 publication page, read October 19, 2026
- Legal Information Institute, Illinois Administrative Code title 8, section 240.125 Firewood Certificates, read October 19, 2026
- Electronic Code of Federal Regulations, 7 CFR 319.40-3 General permits, current text via the eCFR renderer, read October 19, 2026