ArbNation Join free

Guarding rules for kindling machines and bagging machines

No regulator opened for this page names a kindling machine or a bagging machine. The general machine guarding rules of OSHA 1910.212 and UK PUWER regulation 11 cover machines of any kind. Ontario's alert on wood splitters covers the nearest machine.

Checked against the sources at the bottom of this page on October 21, 2026. Rules, fees and pay change: the source has the last word.

This page reports what the official source says. It is not legal advice: ask the office named here. None of the six pages opened names a kindling machine or a bagging machine, and none gives output rates or prices. The rules below are written for all machines or all work equipment, and for the nearest machines the regulators do describe, wood splitters and firewood processing machines.

The rules in the sources

Machine guarding provisions that apply to machines in general
SourceScopeWhat it provides
US: 29 CFR 1910.212(a)General requirements for all machinesOne or more guarding methods protect the operator and others in the machine area from point of operation, ingoing nip points, rotating parts, flying chips and sparks.
UK: PUWER 1998 regulation 11Dangerous parts of machineryEmployers take measures to prevent access to any dangerous part, or to stop its movement before a person enters the danger zone.
Ontario: Regulation for Industrial Establishments, sections 24, 25, 26, 28 and 76Wood splitters in factoriesWorkers must not have access to moving parts that may injure them. Conveyors are guarded under sections 24 and 25.

United States: 29 CFR 1910.212

The OSHA general industry standard 1910.212 gives barrier guards, two-hand tripping devices and electronic safety devices as examples of guarding methods. Guards are affixed to the machine where possible and secured elsewhere if not, and a guard must not be an accident hazard itself.

The point of operation is the area where work is performed on the material. Where its operation exposes an employee to injury, it is guarded in conformity with appropriate standards or, without one, so as to prevent the operator having any part of the body in the danger zone during the operating cycle. Special handtools for placing and removing material supplement guarding and do not replace it. Power saws, milling machines and portable power tools are on the list of machines that usually require point of operation guarding.

Revolving drums, barrels and containers are guarded by an enclosure interlocked with the drive, so they cannot revolve unless the guard is in place. Fan blades less than seven feet above the working level are guarded with openings no larger than one-half inch. Machines designed for a fixed location are anchored against walking or moving.

A safety handout produced under an OSHA grant lists five general types of safeguard: guards (fixed, interlocked, adjustable or self-adjusting), devices, automated feeding and ejection mechanisms, machine location or distance, and miscellaneous aids. It says all guards should prevent contact, be secured in place and create no new hazard. Its list of hazardous mechanical motions covers rotating, reciprocating and transverse motions, points of operation, and pinch and shear points.

United Kingdom: PUWER

The Health and Safety Executive describes the Provision and Use of Work Equipment Regulations 1998 as placing duties on people and companies who own, operate or control work equipment. Work equipment is any machinery, appliance, apparatus, tool or installation for use at work. The HSE overview says protective measures will normally include guarding, emergency stop devices and means of isolation from energy sources. Access to dangerous parts will normally be prevented by fixed guarding, with interlocked guards where routine access is needed.

Regulation 11(2) sets an order of measures. Fixed guards enclosing every dangerous part come first where practicable. Then come other guards or protection devices, then jigs, holders, push-sticks or similar appliances, along with information, instruction, training and supervision. Under regulation 11(3), guards and protection devices must be suitable for their purpose, of good construction and adequate strength, and maintained in good repair. They must not give rise to increased risk, must not be easily bypassed or disabled, and must sit at a sufficient distance from the danger zone.

Wood splitters and firewood processing machines

The HSE safety bulletin OPSTD 2-2011, issued May 25, 2011, describes firewood processing machines as built with cutting and splitting stations, powered or hand fed, with a hydraulic ram pushing short lengths against a splitting plate. Some have a discharge conveyor. Other designs use a rotary knife and spike to cut and split in one operation. The bulletin names trapping and crushing hazards between the ram, log and splitting plate, and says guards seen on some machines were too short to stop finger or hand access. It notes that the European log splitter standard, EN 609-1, covers only the splitter part of a dual-purpose machine.

The Ontario Ministry of Labour, Immigration, Training and Skills Development alert on wood splitters, updated September 15, 2026, calls them a significant cause of injuries in forestry, farming and wholesale. It places splitters in workplaces that fit the definition of a factory. Besides fixed guards, it names interlocked moveable guards, two-hand controls and light curtains as devices that may prevent access to the point of operation. Operating controls used as a guard must also meet section 28 of the Regulation for Industrial Establishments. The alert lists the standard CAN/CSA Z142-02 for judging whether guarding is adequate and says it is not legal advice.

Sources