Knots arborists use: the names in the codes and syllabi
Two training documents name knots: Australia's unit AHCARB311, with 23 names across three work settings, and New Zealand's unit standard 25402. The TCIA course page, the AHCARB319 climbing unit and the UK ICoP name none.
Checked against the sources at the bottom of this page on October 15, 2026. Rules, fees and pay change: the source has the last word.
The facts here come from the named codes and training bodies. It is not training and does not teach the work. Knot names appear, tying steps do not.
The Australian unit that names them
Training.gov.au publishes unit AHCARB311, Tie, dress, set and finish arborist knots, generated August 1, 2022. The unit covers knots, hitches and bends for ground-based workers, has no prerequisite and is marked a new unit with no equivalent. Its range of conditions sets three lists of knots that learners must know: ground-based rigging, above ground, and aerial rigging.
| Name | Ground-based rigging | Above ground | Aerial rigging |
|---|---|---|---|
| Alpine butterfly knot | Listed | Listed | |
| Bowline knot | Listed | ||
| Bowline on the bight | Listed | Listed | |
| Running bowline | Listed | Listed | Listed |
| Clove hitch | Listed | ||
| Clove hitch + two half hitches | Listed | Listed | |
| Cows hitch | Listed | ||
| Cows hitch with better half | Listed | ||
| Double Fishermans Knot/Prusik loop | Listed | ||
| Double overhand stopper knot | Listed | ||
| English Prusik knot | Listed | ||
| Girth hitch | Listed | ||
| Half hitch pre knot | Listed | Listed | |
| Klemheist friction knot | Listed | ||
| Marline pre knot | Listed | Listed | |
| Marline spike hitch (Marlin Spike above ground) | Listed | Listed | Listed |
| Riggers knot + two half hitches | Listed | Listed | |
| Rolling hitch | Listed | ||
| Scaffold knot | Listed | ||
| Sheet bend | Listed | Listed | Listed after the page break |
| Slippery sheet bend | Listed | Listed | Listed after the page break |
| Timber hitch | Listed | Listed after the page break | |
| Zeppelin bend | Listed | Listed |
In the PDF the aerial rigging list breaks across pages. Timber hitch, sheet bend and slippery sheet bend sit at the top of the next page. An empty cell means that list does not print the name.
What the unit asks of a knot
AHCARB311 has performance criteria for choosing and judging a knot. The learner decides a knot's work application for ground-based, aerial, rigging and climbing tasks. The unit lists locking and non-locking attributes, strength, effect on rope strength, loosening and slippage. It also names loss of rope strength, secondary knots, stopper knots and a tail of about five rope diameters. The last criteria are to dress the knot, set it by tightening and loading it before use, and finish it with a stopper knot, tucked tail or suitable tail length.
Courses and codes that name no knot
The Tree Care Industry Association lists Knots and Hitches as the third of seven modules in Tree Climber Specialist 1: Fundamentals. The course page gives the module title and no knot names. The Australian climbing unit AHCARB319 carries one performance criterion on the subject: to tie, dress, set and finish climbing knots and hitches according to climbing system requirements.
The Arboricultural Association's Industry Code of Practice for Tree Work at Height, second edition, May 2020, names no knot either. It defines a friction hitch as the term for the knots and hitches that control ascent, descent or position on the rope and self lock when released. It defines a termination as the end of a rope, which can be a knot, a splice, a stitched eye or a combination. No opened source names the Munter hitch.
A code and a unit standard that go further
The SafeWork NSW Tree works code of practice, section 4.7, covers Prusik loops and other friction knots. The loops should be compatible with the climbing rope and made of fit for purpose rope. They should be a length that suits the climber and the system. They should be tested at ground level before first use in a tree, and inspected for heat and abrasion damage before and after each use. In section 4.9 it lists knots not to use for fall prevention: those insecure if tied incorrectly, those needing a second knot for security, and those that creep or loosen under load. Its examples are the stopper knot and the barrel knot.
NZQA unit standard 25402, Demonstrate advanced tree climbing for arborists, is set at level 5 with 10 credits. Its range for knots and friction hitches may include an endline knot (double fisherman's knot), Schwabisch, Distel, klemheist, Valdotain Tresse and alpine butterfly. Evidence is required of at least three different types of knots and friction hitches, with one friction hitch and one endline knot among them.
Credits: SafeWork NSW text is adapted from the Tree works code of practice (March 2026), copyright State of New South Wales (SafeWork NSW), licensed under Creative Commons Attribution 4.0; changes were made, because the text is summarised and reworded.
Sources
- Skills Impact, AHCARB311 Tie, dress, set and finish arborist knots, release 1, generated August 1, 2022, read October 15, 2026
- Skills Insight, AHCARB319 Use arborist climbing techniques, release 1, generated February 11, 2025, read October 15, 2026
- Tree Care Industry Association, Tree Climber Specialist 1: Fundamentals, read October 15, 2026
- Arboricultural Association, Industry Code of Practice for Arboriculture: Tree Work at Height (ICoP), second edition, May 2020, read October 15, 2026
- SafeWork NSW, Tree works code of practice, March 2026, read October 15, 2026
- New Zealand Qualifications Authority, unit standard 25402 version 2, Demonstrate advanced tree climbing for arborists, and undertake a simulated aerial rescue, read October 15, 2026