ArbNation Join free

Log splitter recall notices: MTD log splitters with a control handle that may not return to neutral, December 2009

MTD recalled log splitters sold under six brand names on December 10, 2009. The notices give the models, build dates, units, reports and remedy, from the CPSC, Health Canada and the maker.

Checked against the sources at the bottom of this page on October 9, 2026. Rules, fees and pay change: the source has the last word.

One recall covers hydraulic log splitters built by MTD Products Inc. and sold under the MTD, MTD Gold, Troy-Bilt, Yard Machines, Cub Cadet and Craftsman names. The U.S. Consumer Product Safety Commission (CPSC) and Health Canada announced it jointly on December 10, 2009. The facts come from the CPSC recall record, the Health Canada notice and the inspection sheet the maker published for the recall. Recalls of other machines are covered in the guide to chipper, log splitter and pole saw recalls.

The fault

The CPSC and Health Canada name the same fault. The control handle on the control valve may not return by itself to the neutral position when the operator lets go, and so may not stop the splitting wedge from moving forward. The CPSC calls this a risk of amputation to the hands and fingers. Health Canada says the wedge could creep or move forward and calls it a laceration risk to the hands or fingers. The CPSC lists no incidents or injuries reported. Health Canada adds that neither it, MTD nor the CPSC had received any reports of incidents or injuries.

Products sold in the United States

The CPSC record has the splitters sold in red, black and yellow in 21, 25, 27 and 33 ton models, built from November 2008 through October 2009. Only models with certain serial numbers are included. The model number is on the frame near the engine. The list below gives where each model was sold.

BrandModel numbers in the CPSC listSold in
MTD Gold24BF510B004, 24BF510E204, 24BF570L004, 24BF570F204Hardware stores
Troy-Bilt24BF572B766, 24AD597D766Hardware stores and independent dealers
Troy-Bilt24BF572B711, 24AD597D711Lowe's
Yard Machines24BF552B729Home Depot
Yard Machines24BF550B029Home Depot and Walmart
Cub Cadet24BF572B756Home Depot
Cub Cadet24BF572B710, 24AD598A010Independent dealers
MTD24BF550M006Walmart and Menards
Craftsman247.77640, 247.77641Sears

The CPSC counts about 26,000 units in the United States and 2,100 in Canada. The manufacturer is MTD Products Inc., of Cleveland, Ohio. Country of manufacture: the United States.

Products sold in Canada

Health Canada's notice, identification number RA-500002159, lists three model numbers: the Yard Machines 8 ton unit 24AA5DMK500, the Yard Machines 21 ton unit 24BH510B500 and the Troy-Bilt 27 ton unit 24BF572B766. The model label sits on the top rear corner of the frame on the 8 ton unit and on the support mount below the engine on the 21 ton and 27 ton units. About 2,100 units were shipped to Canada for sale at Canadian Tire, Lowe's, Sears and other independent retailers, between November 2008 and October 2009.

Build dates on the maker's sheet

The maker's consumer inspection sheet, form number 769-05565, covers 8, 21, 25, 27 and 33 ton units fitted with a control valve it calls the Energy valve. It lists the affected model numbers by brand: Cub Cadet, MTD, MTD Gold, Sears Craftsman, Troy-Bilt and Yard Machines. For Craftsman it gives 24BF570L099 and 24BF570F299 as the maker's own numbers for 247.77640 and 247.77641. Units built from November 1, 2008 through September 1, 2009 are affected. The second to fifth digits of the 11 digit serial number give the build date: a letter for the month, two digits for the day and one digit for the year. A valve without the name Energy on its end cap is not affected by the recall. The sheet also carries the maker's own test procedure.

Remedy

The CPSC says consumers should stop using the recalled log splitters at once and contact MTD Products Inc. to find out whether their machine is included, to receive inspection instructions and to receive a free repair if needed. Health Canada gives the same stop-use instruction and the same contact for inspection instructions. A faulty control valve is replaced with a free valve installed at an appointment. The maker's sheet ends with the same instruction for a valve that fails its own test: stop using the splitter and call the maker for a free replacement valve.

To correct or remove an entry, write to the address at the foot of this page.

Sources