ArbNation Join free

Machine and vehicle standards register: ISO 11850, 11839, ASME B30.5, EN 280, EN 13525

Six machine standards with code, edition and scope as published: ISO 11850:2011 and ISO 11839:2021 for forestry machines, ASME B30.5 for mobile cranes, EN 280, EN 13525:2020 for chippers and ISO 11806:2022.

Checked against the sources at the bottom of this page on October 15, 2026. Rules, fees and pay change: the source has the last word.

This page reports what the official source says. It is not legal advice: ask the office named here. The standards themselves are sold by their publishers.

Register

StandardStatus as listed
ISO 11850:2011 (edition 3). Machinery for forestry: General safety requirementsPublished November 15, 2011. Replaces ISO 11850:2003
ISO 11839:2021 (edition 2). Machinery for forestry: Thrown object guard: Test method and performance criteriaPublished February 19, 2021. Replaces ISO 11839:2010
ASME B30.5-2025. Mobile and Locomotive CranesPlaced on stabilized maintenance by ASME
EN 280:2013 with amendment A1:2015. Mobile elevating work platforms: Design calculations, stability criteria, construction, safety, examinations and testsPublished November 16, 2015. Withdrawal effective February 16, 2022. Revised by EN 280-1:2022
EN 13525:2020. Forestry machinery: Wood chippers: SafetyPublished August 17, 2020. Confirmed December 4, 2025. Replaces EN 13525:2005+A2:2009
ISO 11806-1:2022 and -2:2022. Hand-held brush-cutters and grass-trimmersPublished February 2022. Both are covered on the guide to handheld outdoor power equipment standards

ISO 11850 and ISO 11839: forestry machines

ISO 11850:2011 gives general safety requirements for self-propelled forestry machines and machines set up as forestry machines. Its scope names fellers, bunchers, delimbers, forwarders, log loaders, skidders, processors, harvesters, mulchers and multi-function versions, as defined in ISO 6814. It does not deal with hazards specific to individual machines, such as particular attachments, so its use alone is not enough to address all significant hazards for most of these machines. It leaves out chain shot, chain breakage on the upper side of the bar, lifting operation, remote control operation, work lights and road safety. Its committee is ISO/TC 23/SC 15. The Swiss and French national adoptions are SN EN ISO 11850:2012 and NF EN ISO 11850:2012.

ISO 11839:2021 sets a laboratory test method and performance requirements for thrown object guards on mobile and self-propelled forestry machinery. The guard protects the operator from powered rotating cutting or grinding elements, and from residual matter thrown by an attachment on the host machine. A guard that meets the standard is specific to each cutting or grinding attachment and host machine model. Protection from saw chain shot is outside it. The standard points to ISO 21876 for that hazard.

ASME B30.5: mobile and locomotive cranes

ASME says B30.5 addresses crawler cranes, locomotive cranes, wheel-mounted cranes and variations that keep the same fundamental characteristics. The scope takes in only those driven by internal combustion engines or electric motors. It leaves out side boom tractors, cranes for railway and automobile wreck clearance, and digger derricks. It also leaves out cranes made for or used in energized electrical line service, knuckle boom and trolley boom cranes, and cranes rated at one ton or less. ASME describes the volume as covering construction, inspection, testing, maintenance and operation, to be used with the other volumes of the B30 series.

EN 280: mobile elevating work platforms

EN 280:2013+A1:2015 applied to all types and sizes of MEWP that move people to working positions, with people getting on and off only at ground level or on the chassis. It covers structural design calculations, stability criteria, construction, and safety examinations and tests before first use. Its scope excludes use in explosive atmospheres, work from the platform on external live electric systems, and getting on and off at changing levels. It also excludes mast climbing work platforms, tail lifts and fire-fighting appliances.

The standard sorts MEWPs into Group A and Group B by where the platform sits against the tipping lines, and into three travel types. In type 1, travel is allowed only in the transport configuration. In type 2, the machine travels with the platform raised, controlled from the chassis. In type 3, it travels raised, controlled from the platform.

EN 13525: wood chippers

EN 13525:2020 covers self-propelled, mounted, semi-mounted and trailed wood chippers used in forestry, agriculture, horticulture and landscaping. It applies to chippers used while stationary and loaded by hand through a horizontal or near horizontal infeed chute. Machines with vertical infeed chutes, machines loaded only mechanically, hazards from engine pull starting and shredder-chippers covered by EN 13683 are outside it. The noise test code in it does not comply with the outdoor noise directive 2000/14/EC. The standard is listed as a harmonised standard under Machinery Directive 2006/42/EC.

Sources