OSHA 1926.1427: the four ways to qualify a crane operator
Section 1926.1427 of the US construction crane standard sets four routes to a qualified operator: a government licence, an accredited testing organization, an audited employer program, or US military qualification. Employer evaluation applies to all four.
Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.
This page reports what the official source says. It is not legal advice: ask the office named here. The text is 29 CFR 1926.1427, "Operator training, certification, and evaluation," in Subpart CC, Cranes and Derricks in Construction. The final rule that last changed it was published in the Federal Register on November 9, 2018 (83 FR 56198).
Operators and equipment under the section
The section puts the duty on the employer. Each operator must be trained, certified or licensed, and evaluated before running any equipment under Subpart CC. An employee without certification or a licence may run the equipment only as an operator-in-training.
Three kinds of equipment are outside the section: derricks, sideboom cranes, and equipment with a manufacturer-rated hoisting capacity of 2,000 pounds or less. OSHA notes that the training rules in the sections for those machines still apply.
The four routes
| Route | What the section requires | Portability and term |
|---|---|---|
| Government licence, paragraph (c)(1) | A state or local licensing program that tests by written and practical exams, meets industry-recognized testing criteria, is confirmed by the overseeing authority, and has re-licensing tests | Valid within that government's jurisdiction, for the period the licensing office sets, no longer than 5 years |
| Accredited testing organization, paragraph (d) | Written and practical tests from an organization accredited by a nationally recognized accrediting agency, with certification by equipment type or by type and capacity | Portable among employers who must have certified operators, valid 5 years |
| Audited employer program, paragraph (e) | Employer tests that an accredited testing organization developed, or that an auditor who is not an employee of the employer approved, with the program audited within 3 months of its start and at least every 3 years after | Not portable, only with the issuing employer, valid 5 years |
| US military, paragraph (a)(3) | A current operator qualification from the US military, for a Department of Defense or Armed Forces employee | Not portable, only with the employer that issued it, valid for the period the military sets |
Accredited testing organizations
Paragraph (d) asks three things of the organization. The accreditor must have found that the testing materials, practical exams, test administration, grading, facilities and personnel meet industry-recognized criteria. The organization must have a way to retest failed or decertified applicants. Its accreditation must be reviewed at least every 3 years.
If no accredited organization offers an exam for a type of machine, an operator counts as certified for the most similar type that has an exam. The certificate must state the equipment type.
The rule text names no testing organization. The 2018 preamble discusses the National Commission for the Certification of Crane Operators (NCCCO) only through comments filed in the rulemaking, and names ANSI and NCCA as accreditors in other comments.
Audited employer programs
The auditor cannot be an employee of the employer, and an accredited testing organization must certify the auditor to evaluate tests and their administration.
- If the auditor finds a significant deficiency, no operator is qualified until the auditor confirms the fix, and the program is audited again within 180 days of that confirmation.
- The auditor files a report of the deficiency with the OSHA Regional Office within 15 days.
- The auditor keeps audit records for 3 years.
Test content for every route
Paragraph (j) sets the content for every route. The written test covers controls and operating characteristics, load and capacity calculation, power line contact, ground and site conditions, and the Subpart CC text. The practical test covers shift inspection items, operating and maneuvering skills, load chart use, and shut-down and securing.
Tests may be given verbally where the candidate passes a written demonstration of literacy relevant to the work and shows the ability to use the written manufacturer procedures for the equipment. Tests may also be given in any language the candidate understands. The certificate then records the language, and the operator may run only equipment whose manuals and load charts are in that language.
Operators-in-training and the employer evaluation
An operator-in-training works under a trainer who is an employee or agent of the employer and watches continuously. The trainer must be in direct line of sight, except for tower cranes, where direct communication is the test. Breaks are limited to 15 minutes, once an hour.
Without certification, a trainee may not work where equipment or load could come within 20 feet of a power line up to 350 kV, or within 50 feet of a line over 350 kV. Hoisting personnel, multiple-equipment lifts, and work over a shaft, cofferdam or tank farm are also barred. Multiple-lift rigging is allowed only where the trainer judges the skills sufficient.
Certification does not end the employer's duty. Paragraph (f) separately requires an evaluation of each operator's skills, knowledge and ability to recognize and avert risk on the equipment. A certificate or degree cannot by itself make a person qualified under this paragraph. The employer documents the evaluation with the operator's name, the evaluator's name and signature, the date, and the make, model and configuration used.
What the 2018 rule changed
OSHA's summary says the rule clarified each employer's duty to confirm operator competency through training, certification or licensing, and evaluation. It also dropped the requirement for different certification levels by rated lifting capacity. Testing organizations may still certify by capacity, and employers may accept those or rely on certification by crane type alone. The certification requirement took effect December 10, 2018. The evaluation and documentation requirements took effect February 7, 2019.
Where certification or licensing is required, the employer provides it at no cost to employees. For the wider picture, see the guide to cranes in tree work.
Sources
- OSHA, 1926.1427 Operator training, certification, and evaluation, read October 16, 2026
- Cornell Law School Legal Information Institute, 29 CFR 1926.1427, read October 16, 2026
- OSHA, Cranes and Derricks in Construction: Operator Qualification, final rule, Federal Register November 9, 2018, read October 16, 2026
- OSHA, Crane, Derrick and Hoist Safety topic page, read October 16, 2026