ArbNation Join free

Pruning terms side by side: US, UK, Australia and Europe

The European Tree Pruning Standard and Australian Standard AS 4373 name their pruning operations differently. Crown lifting, thinning, reduction, pollarding and restorative pruning each appear under a different heading.

Checked against the sources at the bottom of this page on October 15, 2026. Rules, fees and pay change: the source has the last word.

This page draws on what the named codes and training bodies publish. It is not training and does not teach the work. The terms come from two documents whose contents are public: the European Tree Pruning Standard of 2021 and the contents list of AS 4373-2007.

Operations in the European and Australian standards

OperationEuropean Tree Pruning Standard, 2021AS 4373-2007, Australia
Dead woodDeadwood management is one reason for structural pruning. No separate crown cleaning term.Deadwooding (D), in the crown maintenance class
ThinningNo term of this nameCrown thinning (T) and selective pruning (S), in the crown maintenance class
RaisingCrown raising, done in successive steps. Excessive crown lifting can raise the centre of gravity and affect stability.Crown lifting (C), in the crown modification class
ReductionLateral crown reduction, of the side or lower crown, which does not alter tree height. Upper crown reduction, of the apical crown.Reduction (R), and line clearance (L), in the crown modification class
RestorationRestorative pruning, for trees substantially affected in physiological and mechanical functionsRemedial pruning (H), in the crown modification class
Structure and trainingStructural pruning, which allows no change of height or major change of crown shape. Formative pruning of young and semi-mature trees.Formative pruning of young trees (F), in the crown maintenance class
PollardingPollarding (knuckle cutting) and trimming, the two types of tree shapingPollarding (P), in the crown modification class
ToppingTopping of mature trees, with no intent to set a fixed form, is considered bad tree workLopping and topping, listed as unacceptable practices

The European standard

The European Tree Pruning Standard was produced in June 2021, as a first edition, by the working group Technical Standards in Treework, with authors from eleven European countries. It defines the technical procedures used for pruning amenity trees.

Its upper crown reduction is described as often irreversibly affecting crown architecture and tree physiology. The aim is not to make trees smaller in the long term. An inspection within 3 to 5 years should follow. Lateral crown reduction will often need repeating to manage regrowth.

Shaping is started when a tree is young and kept up for life. The standard separates it from topping by three points: it starts on a young tree, the pruning is usually frequent (under 3 years), and the cuts are small (under 5 cm). For maintained pollards the interval is usually 3 to 10 years and cuts usually stay under 10 cm. Formative pruning should start as soon as the tree is established, usually 3 years after planting at the latest, and repeat every 2 to 3 years.

Australia, the US, Britain and ISA

Standards Australia published AS 4373-2007, Pruning of amenity trees, on March 14, 2007 and reconfirmed it on September 25, 2020. It covers amenity trees including palms. It excludes pruning for timber, foliage, fruit or flower production, topiary, hedging and pleaching, and tree worker safety. Its contents also list pre-pruning considerations, foliage distribution and root pruning.

The Tree Care Industry Association is secretariat for the ANSI A300 standards, which since January 1, 2024 form a single consolidated document. The TCIA page defines no pruning terms. The British Standards Institution lists BS 3998:2010, Tree work: recommendations, for established trees. Its listing prints no pruning terms either.

The ISA Best Management Practices booklet on tree pruning, third edition 2019, is by Sharon J. Lilly, Edward F. Gilman and E. Thomas Smiley. It is a companion to the A300 standards. Its listed topics are pruning systems, objectives, cuts, practices, poor pruning practices, conifers, palms and bamboo, specifications and a glossary.

Sources