Root protection area in UK practice: the rule and how plans show it
UK councils print the root protection area rule as a circle with a radius of 12 times the stem diameter, capped at 707 m2, redrawn as an equal-area polygon where roots grew unevenly. The Arboricultural Association traces the 12 times multiplier to 2005.
Checked against the sources at the bottom of this page on October 16, 2026. Rules, fees and pay change: the source has the last word.
The root protection area, or RPA, is the figure that decides how much ground a UK planning document keeps clear around a tree. Barrow Borough Council and the Lake District National Park Authority print the rule in leaflets on what drawings a planning application needs. Leeds City Council and the Arboricultural Association (AA) add how it appears on plans. BS 5837 itself is a paid standard and its clauses are not reproduced.
The rule as councils print it
Both leaflets define the RPA as the minimum area, in square metres, left undisturbed around each retained tree to maintain its viability. Protection of roots and soil structure is treated as a priority there. Development inside it is to be avoided where possible.
| Tree | Rule |
|---|---|
| Single stem | Area of a circle with a radius of 12 times the stem diameter |
| Two to five stems | Combined diameter is worked out from the sum of each stem diameter squared |
| More than five stems | Combined diameter is worked out from the mean stem diameter squared, multiplied by the number of stems |
| Any tree | The calculated RPA is capped at 707 m2 |
Stem diameter is measured at 1.5 m above ground, with other heights for sloping ground, low forks and swellings shown in a diagram. The leaflets show worked examples. A 75 cm stem gives an RPA radius of 900 cm, and a 125 cm stem gives 1500 cm.
Circle, polygon and offsets
The RPA is first plotted as a circle centred on the stem base. Where site conditions indicate that roots grew unevenly, a polygon of equivalent area is drawn. Barrow and Lake District list four factors for any change of shape. They are root morphology as shaped by roads, structures and underground apparatus, topography and drainage, soil type and structure, and the tree's likely tolerance to root disturbance.
Leeds gives the same circle-then-polygon rule. It adds that plans must show RPAs and canopies, and that the tree information appears on all main layouts, drainage included. Its default for construction is a 5 m stand-off from the larger of canopies and RPAs. The BS 5837 default is no structures inside the RPA of retained trees unless there is an overriding justification, Leeds adds.
Both leaflets also ask whether any tree stands within 15 m of the proposed development. If so, a tree constraints plan shows the stem, canopy spread and RPA of each. A full survey by a qualified arboriculturist is needed where the plan shows development inside an RPA or canopy.
Where the multiplier came from
The AA workshop on the draft BS 5837 revision says the 2005 edition introduced the RPA with a 12 times multiplier. It also states that roots spread beyond the RPA, and that the circle was never meant to contain all the roots.
The 2024 draft proposes some changes. A minimum radius of 2 m would apply. For multi-stemmed trees, the larger of the multi-stem result and the largest single stem would be used. Veteran trees would get a buffer of 15 times the stem diameter or 5 m beyond the crown spread, taking the larger. Mature Category A trees would get a 15 times multiplier capped at 1,590 m2. All other live features would keep 12 times, capped at 707 m2 or a 15 m radius. These are proposals in a draft, and BSI still lists the 2012 edition as current. For the standard, see the outline of BS 5837.
Sources
- Barrow Borough Council, Trees: what drawings do I need to include with my planning application, February 2020, read October 16, 2026
- Lake District National Park Authority, Trees: what drawings do I need to include with my planning application, read October 16, 2026
- Leeds City Council, Existing trees and development: tree-related information in the planning system (Landscape Guidance No. 1), read October 16, 2026
- Arboricultural Association, BS 5837 revision workshop, September 2024, read October 16, 2026