Safety and health programs: OSHA's recommended practices, HSE HSG65, WorkSafeBC and ISO 45001
OSHA lists seven core elements for a safety and health program. HSE HSG65 uses Plan, Do, Check, Act. WorkSafeBC lists seven required contents, and ISO 45001 sets requirements for an occupational health and safety management system.
Checked against the sources at the bottom of this page on October 15, 2026. Rules, fees and pay change: the source has the last word.
This page reports what the official source says. It is not legal advice: ask the office named here. OSHA and HSE publish guidance. WorkSafeBC states a legal duty for larger employers. ISO 45001 is a standard sold by the standards body.
Four frameworks side by side
| Publisher | Form |
|---|---|
| OSHA, Recommended Practices for Safety and Health Programs (OSHA 3885, October 2016) | Guidance built on seven core elements, each with action items |
| HSE, Managing for health and safety (HSG65, 2013) | Guidance built on Plan, Do, Check, Act |
| WorkSafeBC, OHS Regulation sections 3.1 to 3.3 | Legal duty to keep a program with seven listed contents, scaled by headcount and hazard rating |
| ISO 45001:2018 | Requirements for an occupational health and safety management system |
OSHA: seven core elements
OSHA's Recommended Practices are meant for a wide variety of small and medium-sized businesses and give a step-by-step approach. The main goal of a program is to prevent workplace injuries, illnesses and deaths. OSHA contrasts a proactive approach with reactive ones that wait for an injury, a new rule or an inspection finding.
- Management leadership. Top management shows commitment, sets expectations and responsibilities, and provides resources.
- Worker participation. Workers are involved in setting goals, reporting hazards, investigating incidents and tracking progress.
- Hazard identification and assessment. Procedures continually identify hazards from routine, nonroutine and emergency situations, with periodic inspections and root-cause incident investigation.
- Hazard prevention and control. Controls follow a hierarchy that puts engineering solutions first, then safe work practices, administrative controls and finally personal protective equipment.
- Education and training. All workers are trained to understand the program and to recognize hazards.
- Program evaluation and improvement. Processes monitor performance and identify shortcomings.
- Communication and coordination for host employers, contractors and staffing agencies. Hazards are communicated and the same level of protection is committed to all employees.
The document also gives ten easy first steps for an employer who finds the full set challenging, and says the seven elements are interrelated.
HSE: Plan, Do, Check, Act
HSE's HSG65, for leaders, owners and line managers, replaced the older POPMAR model (Policy, Organising, Planning, Measuring performance, Auditing and Review) with Plan, Do, Check, Act. HSE treats health and safety management as part of good management in general rather than a stand-alone system.
- Plan. Say what you want to achieve, who is responsible and how success is measured. The policy and plan may be written down. Fire and other emergencies are part of the plan.
- Do. Assess risks, involve workers, provide resources, put preventive measures in place, train and supervise.
- Check. Measure performance, noting that paperwork on its own is not a good measure. Investigate accidents, incidents and near misses.
- Act. Review performance, learn from incidents and ill-health data, and act on lessons from audit and inspection reports.
WorkSafeBC: a program as a legal duty
Section 3.1 of the OHS Regulation requires a formal program from an employer with 20 or more workers and at least one workplace rated moderate or high hazard, and from any employer with 50 or more workers. An officer can require one in any workplace. Under section 3.2, a smaller employer keeps a less formal program built on regular monthly meetings with workers and a record of them.
Section 3.3 sets the program's aim as preventing injuries and occupational diseases. It must include:
- a statement of the employer's aims and the responsibilities of the employer, supervisors and workers
- regular inspection of premises, equipment, work methods and work practices
- written instructions available to all workers
- periodic management meetings to review activities and incident trends
- prompt investigation of incidents
- records and statistics, including inspection and investigation reports
- instruction and supervision of workers in the safe performance of their work
ISO 45001:2018
The SNV-Connect catalogue lists ISO 45001:2018 as edition 1, published March 12, 2018, with an amendment from 2024. The abstract says it specifies requirements for an occupational health and safety management system and applies to any organization of any size, type and activities. It does not state specific criteria for performance and is not prescriptive about the system's design. Claims of conformity are not acceptable unless all its requirements are incorporated and fulfilled without exclusion. The element list is in the paid standard.
Sources
- OSHA, Safety Management: Recommended Practices for Safety and Health Programs, read October 15, 2026
- OSHA, Recommended Practices for Safety and Health Programs, OSHA 3885, October 2016, read October 15, 2026
- Health and Safety Executive, Managing for health and safety (HSG65), 2013, catalogue page, read October 15, 2026
- Health and Safety Executive, Managing for health and safety, HSG65 text, read October 15, 2026
- WorkSafeBC, OHS Regulation Part 3, Rights and Responsibilities, sections 3.1 to 3.3, read October 15, 2026
- SNV-Connect, ISO 45001:2018 catalogue entry, read October 15, 2026