Saw noise labelling: Directive 2000/14/EC and the EU noise level marks
Directive 2000/14/EC puts portable chain saws in the group that carries noise marking only, with no permissible sound power limit. The mark is the CE marking next to the guaranteed sound power level in dB, shown as a number, LWA and a pictogram.
Checked against the sources at the bottom of this page on October 19, 2026. Rules, fees and pay change: the source has the last word.
This page reports what the official source says. It is not legal advice: ask the office named here. The text of the Directive is from legislation.gov.uk, which publishes the UK version of the EU act as it stood at the end of 2020.
The Directive at a glance
| Item | What the source records |
|---|---|
| Act | Directive 2000/14/EC of the European Parliament and of the Council of 8 May 2000, on noise emission in the environment by equipment for use outdoors |
| Scope | 57 types of equipment used outdoors, per EU-OSHA |
| Chain saws | "Chain saws, portable" are in Article 13, equipment subject to noise marking only |
| The mark | CE marking accompanied by the indication of the guaranteed sound power level |
| UK instrument | The Noise Emission in the Environment by Equipment for use Outdoors Regulations 2001, SI 2001/1701 |
| Test code | EN ISO 22868:2021 for portable hand-held machines with an internal combustion engine |
What Article 3 defines
Article 3 of the Directive defines the terms the mark rests on. Marking is the visibly, legibly and indelibly affixing on the equipment of the CE marking accompanied by the indication of the guaranteed sound power level.
The sound power level LWA is the A-weighted sound power in dB in relation to 1 pW as defined in EN ISO 3744:1995 and EN ISO 3746:1995. A measured sound power level is determined from measurements under Annex III, from a single representative machine or from the average of a number of machines.
The guaranteed sound power level is determined under Annex III and includes the uncertainties due to production variation and measurement procedures. The manufacturer or its authorised representative in the Community confirms that, according to the technical instruments applied, it is not exceeded.
Marking only for portable chain saws
EU-OSHA explains that the Directive covers equipment placed on the market or put into service as an entire unit. Equipment is not placed on the market until the manufacturer or its authorised representative has seen to three things. The equipment meets the noise emission requirements. The conformity assessment procedures are complete. The equipment bears the CE marking and the indication of the guaranteed sound power level, and comes with an EC declaration of conformity.
The Directive splits equipment into two groups. Article 12 equipment, such as lawnmowers, compressors and excavators, has a guaranteed sound power level that must not exceed a permissible level in tables of limit values. Article 13 equipment is subject to noise marking only. The Article 13 list includes portable chain saws, brush cutters, hedge trimmers, grass trimmers, leaf blowers and shredders and chippers.
Article 14 sets the conformity assessment. For Article 13 equipment the manufacturer subjects each type to the internal control of production procedure in Annex V. Recital 12 calls self certification appropriate for equipment subject to noise marking only.
Why the mark is on the machine
Recital 10 of the Directive says marking with the guaranteed sound power level enables consumers and users to make an informed choice of equipment. It is also a basis for regulation on use or economic instruments adopted at local or national level. The marking must be clear and unambiguous, and the values are guaranteed by the manufacturer.
Recital 7 adds that Member States should not prohibit, restrict or impede the placing on the market of equipment that complies. Such equipment bears the CE marking and the indication of the guaranteed sound power level, and has an EC declaration of conformity.
The form of the mark in Annex IV
Annex IV is reproduced as Schedule 7 of the UK Regulations. The CE conformity marking consists of the initials CE in a set form, and its components have nearly the same vertical dimensions, not less than 5 mm.
The indication of the guaranteed sound power level consists of the single number of the guaranteed sound power in dB, the sign LWA and a pictogram. Its vertical dimension should, if possible, not be less than 40 mm.
The UK Regulations and the test code
The 2001 Regulations list the parts of the Directive as sections and schedules. Regulation 11 is headed CE marking and indication of the guaranteed sound power level. Schedule 2 lists equipment subject to noise marking only, and Schedule 4 has the definitions, with Chain saw, portable as item 6.
EN ISO 22868:2021, Forestry and gardening machinery, noise test code for portable hand-held machines with internal combustion engine, specifies a test code for chain saws, brush cutters, grass trimmers, edgers, pole-mounted powered pruners, hedge trimmers and garden blowers. Its characteristics include the A-weighted emission sound pressure level at the operator position and the A-weighted sound power level. The EVS page lists the Machinery Directive 2006/42/EC against it, not Directive 2000/14/EC.
EU-OSHA notes that the Machinery Directive is to be replaced by the Machinery Regulation from 20 January 2027. Of the two, the Machinery Directive focuses on noise emissions at the operator and the outdoor noise Directive on the whole environmental impact.
The Directive's marking is separate from the workplace noise rules in the guide to chainsaw noise at work.
Sources
- Directive 2000/14/EC, Article 3 Definitions, legislation.gov.uk (UK version of EU act), read October 19, 2026
- Directive 2000/14/EC, Article 12 Equipment subject to noise limits, legislation.gov.uk, read October 19, 2026
- Directive 2000/14/EC, Article 13 Equipment subject to noise marking only, legislation.gov.uk, read October 19, 2026
- Directive 2000/14/EC, Article 14 Conformity assessment, legislation.gov.uk, read October 19, 2026
- Directive 2000/14/EC, recitals, legislation.gov.uk, read October 19, 2026
- The Noise Emission in the Environment by Equipment for use Outdoors Regulations 2001 (SI 2001/1701), contents as made, legislation.gov.uk, read October 19, 2026
- SI 2001/1701, Schedule 7 (Annex IV to the Directive) Models of the CE marking and of the indication of the guaranteed sound power level, as made, read October 19, 2026
- EU-OSHA, Directive 2000/14/EC, noise, equipment for use outdoors, read October 19, 2026
- Estonian Centre for Standardisation and Accreditation (EVS), EVS-EN ISO 22868:2021 catalogue entry, read October 19, 2026